Thank you. Yes, I like to keep them busy. Why let them use the angle grinder for 15 seconds when they can use the framing hammer for 15 minutes 😂

Did you get any extra attachments? What was totally cost to door? It a perfect size? Does have extendable tracks? And pivot boom? I don't need encloser/cab. Just roll bar with roof. Thx great video

@@mad151maxx4 You can see all the details in the ordering video. There are so many different hidden fees. They are all broken down in the excel spreadsheet. kzfaq.info/get/bejne/oMyRq6mSy7WcpZc.html

Thank you for your kind words. They have free access to 90% of my tools at any time.

Glad it was helpful!

Thanks for the sub!

Mine was going to be fully assembled, but it was too tall with the cab.

@@einarmikkelsenPNW My 2ton has a full cab- with an ac unit hanging from the back as well It was also shipped with an auger, jackhammer and an extra bucket all was in the crate. My cab also has a door that locks to the cab in the open position with a latch. I thought all these were prettier much the same. It is a hightop model and look alot like the ground hogs sold by a dealer here in the USA

@@jamesdarr6714 that's what l want but electric

@@darrenegginton9842 Im still a bit apprehensive on electric stuff, it has came a long way but I don’t think we’re quite there yet

@@jamesdarr6714 what's your concern

Thanks 🙏

I think so. Love the machine and use it almost daily. Only minor issues.

Check out the 50 hours of operation review video.

I will.

The previous video covers that 100%

I know. All my issues are minor. Love the machine

Yep they are selling them here in Houston for $4200 without the cab

Damn! How? Of course, mine is a lot bigger than that, but it is still an amazing price!@@JuarezDerrick

I have links to the company in my ordering video: kzfaq.info/get/bejne/oMyRq6mSy7WcpZc.html

Jeg vet ikke hvor mye du må betale for å importere til Norge men jeg kan tenke meg at det er mye. Du må også finne ut hva slags motor du må ha for å få lov til å ha den i Europa. EPA motoren jeg måtte ha kostet flere tusen dollar ekstra.

Det stemmer. Jeg er fra Norge og kona er fra Sverige. Barna snakker begge, pluss engelsk.

Yes, this should be fun

Thanks 👍

Yes. Crazy hot. The fan is not enough. Windows open and fan on is better. Clothing is optional.

Takk

I don't know Mads.

Takker. Ja han blir bedre og bedre 😄

Det vet jeg ikke noe om. Det var 25% import skatt til USA. Vet ikke hva det er til Norge

Because the excavator with the cab is too high to enter the container

That is correct.

There is a full Excel spreadsheet at the end of this video: kzfaq.info/get/bejne/oMyRq6mSy7WcpZc.html

Du kan se prisen i denne videoen. Den var ikke så dyr i Kina, men så ble det mye ekstra kostnader når den kom inn til Seattle. kzfaq.info/get/bejne/oMyRq6mSy7WcpZc.html

I'll give that a shot.

The biggest ones were dragged on rollers, using rope, skinny logs, and the Tesla. The smaller logs were all moved with the excavator.

Thanks

Ja det stemmer. Bor i en fake norsk by også, Poulsbo.

Va roligt, tänkte väl att jag hörde norska :)

@@einarmikkelsenPNW Ser fint ut, lever i fred og ro der nere, tenker jeg.

They are important.

Enda bedre: norsk

Det stemmer det vet du :) Fra Svelvik

You always have to be careful. Check out the company's history. I have tried to search for companies that are Japan-based, to get around the 25% tax on China, just to find out that their factory is in China.

I am babying it. Taking it easy, warming it up for 10 min before I drive, and let it cool off when I am done. Grease every time.

I mean the majority of parts are going to be off the shelf components so great for people that diy repairs. You can swap out the motor for anything remotely similar (a motorcycle engine would be a killer swap in) in a couple hours. Imo better for repairs than something like cat where everything even bolts are proprietary.

@@stich1960 Thank you for the info. I will keep that in mind when it is time.

BTW, what does "hog it" mean?

@@einarmikkelsenPNW hogging with a digging machine is a slang way of saying you stick the digger into the material like it's already loose, grabbing full buckets in one go. The advice I received is that you should use the bucket and teeth to break up the soils in smaller passes, then grab broken dirt with the bucket to move it. One thing I noticed about this strategy is that it's less likely for the bucket to create a vacuum against the material. I think it's also less stress against the joints which reduces wear on the bushings.

What things went wrong?

...well, if you are Asian 🤣

Tiangong space station - Sick! Long March Rocket family - Brilliant@ Everything I buy anywhere - Pretty good. BYD, Great Wall Motors, Nio, and Xpeng EV Cars - Amazing! There are exceptions to your general statement. Let's hope the excavator is among them.

Jeg har gått på skole og nå jobber her.

The old growth is on the back of the property and left behind.

I'll give you a 6 month and 12 month follow-up. Only a few issues so far. Nothing big. And I do love that MSG!

EbikeSchool would disagree they got their farm truck for 16mo now and they are pretty satisfied

@@ddjohnson9717 That is great news. I have been very happy!