Coloring Cement Concrete Trinket Trays DIY w/Acrylic Pigments Cement Gypsum Jesmonite Alternative

Рет қаралды 58,969

3 жыл бұрын

Etsy Shop: JosCreatesCo. (Release Date August 2021)
FB: JosCreatesCo
IG: JosCreatesCo
Materials:
Home Depot
~Plaster of Paris
~Cement ALL
~Water
Jerrys Artarama
~Amsterdam Acrylics
Hi, name is Josica and Welcome to my channel.
I have been an artist for 10+ years
I'm Based in Houston TX
Currently I am a Full Time Science Teacher
On my down time I work on my art
I have worked with all types of mediums, from ceramics clay, gouache, water color, acrylic, and oil
My favorite places to shop for supplies is Jerrys Artarama, Trekell Art Supplies, Blick Art Studio, and Michaels.
Canvases are usually from Michaels
Acrylic used are Amsterdam and/or Lukas
Oils are Windsor Newton and/or Gamblin
Gouache Turners Acrylic Gouache or Arteza Gouache
Sketch Pencils are Prisma color
Paint Markers used are Posca Paint Pens
Wood Panels are usually Trekell
Canvas Outlines and Art Kits: HTV Cricut Vinyl, Michaels Canvas, Amsterdam or Lukas Paints, and Michaels bulk paint brushes
I spent the last two years perfecting my craft
Check me out on
TikTok: JoseCreatesCo
IG: JosCreatesCo
Facebook: JosCreatesCo
Etsy: JosCreatesShop
Discount Code :YT15OFF
Website: JosCreatesCo.com
#cricut #vinyl #paintandsip #sipandpaint #paintkit #blackArt #paintparty #etsyshop #etsy #htv #artist #blackartist #artwork #artgallery #painting #oilpainting #acrylicpainting
#resin #homediy #turntable #tutorial #mica #acrylic #drawing #sketching
#silicon #molds #alibaba #aliexpress #oval #gold trays #acrylic #marble
#concrete #cement #boho #minimalism #gypsum #plaster #homedepot

Пікірлер: 92

@ChristinaQueenHeart 2 жыл бұрын

if you add more water, it gives you more time to work with and it pours a little better. If you have a sanding machine, turn it on on the table where you work after your pour. It'll help pop up the bubbles and level at the same time.

@joscreatesco.4946 2 жыл бұрын

Thank you, too much water is what makes it easily break too. I try to add more cement as I go to make it thick but gypsum doesn’t make it any stronger

@ChristinaQueenHeart 2 жыл бұрын

@@joscreatesco.4946 When you add water it requires a much longer drying time, even with rapid set. I make massive bowls this way and I usually have to let it sit and dry for 2 days. Any demolding for then will cause breaking/crumbling. I

@josjoseph1883 2 жыл бұрын

@@ChristinaQueenHeart ahhh I see what you’re saying

@Mary-gb8li 4 ай бұрын

Hi Christina, Hope you don't mine me asking you a question. I do diamond painting molds but I like Ultracal 30 for the molds. Can I use that instead of the Plaster of Paris and would I still need to use the Cement All? i'm still new to making these molds. I appreciate you taking the time to answer me and have blessed day.@@ChristinaQueenHeart

@jacquiericard5190 2 жыл бұрын

Your work station is sooooooo clean! I have cement all every where lol

@joscreatesco.4946 2 жыл бұрын

After a making a lot of those the work space is just for video aesthetic it’s a hot mess

@LalaMDavis Жыл бұрын

Glad I found your videos! They’re quite helpful. Thanks for posting. I’ll try out the concrete & PoP mix!

@joscreatesco.4946 Жыл бұрын

I have a new method pop is brittle

@LalaMDavis Жыл бұрын

@@joscreatesco.4946 Thanks for the update hun! 🖤🖤

@lizfields 10 ай бұрын

I also make concrete vessels and trays. May i ask what the plaster of paris does? It seems like its shinier but im curious what the plaster is for and why you choose to use it. TIA

@nezumithe-mouse6319 2 жыл бұрын

Hello. Is your mixture enough to do 2 trays at a time? Thanks!

@pantcara4651 2 жыл бұрын

Hi Please, can you put the link of the materials ( plaster of Paris and cementale ) that you used on this video

@evelintorrisi9579 Жыл бұрын

Fantastic ! but how do I know how much water and cement to use? what ratio do i use?

@areejfatima270 Жыл бұрын

I tried making with just cement with different ratios. It keeps on breaking?

@amvinmacapugay1282 Жыл бұрын

Can i ask something? What is good gymsum powder or cement powder when making this trinket

@gianninaarnaiz3995 Ай бұрын

Hola, cómo eliminas el sarro que se va acumulando en los moldes de silicona?

@kanianurardhini6466 2 жыл бұрын

Hello I am from Indonesia, I watched many videos about DIY Terrazzo Tray but usually they used Jesmonite liquid for mixing the mixture but in my country there isn’t available. And then I watched your video, I wanna ask, so you didn’t use another liquid then water in mixing the mixture, right? And how much measure comparison between cement and the gypsum powder? Thank you so much!

@joscreatesco.4946 2 жыл бұрын

Gypsum and Cement All has there pros and cons gypsum only con is it’s very weak. Cement all on the other hand yellows and greys out my added colors still testing and seeing what works or not. Mixing them together helps cancel out their cons. I’m in the process of using a acrylic polymer instead of water once I Do it I will have a video. In video I feel I am using too much water so if it’s too liquidy add equal parts of each until it’s like a cake or pancake batter texture. It does dry fast so be careful in your experimenting

@kanianurardhini6466 2 жыл бұрын

@@joscreatesco.4946 thank you so much for your response 🥰 waaaw i can’t wait for your next video, it will be very helpful for beginners like me. Going to subscribe your channel. Nice to know you by the way 😊🤍

@yacouboumayma9574 2 жыл бұрын

Very nice video, please i want to ask you, what chould we do to get the very dark black color ? I added to much acrylic to get the color but it dosen't want to dry

@joscreatesco.4946 2 жыл бұрын

It has to dry, but don’t cake it only thing you can do is paint it the black color with no mix

@coffeeporschebean 2 жыл бұрын

Can you coat it with clear lacquer or something so that the finish is less powdery?

@josjoseph1883 2 жыл бұрын

I used liquitex gloss varnish

@areejfatima270 Жыл бұрын

How can I seal them?

@julierothert3039 2 жыл бұрын

Adorable! Curious as to why you add the gypsum instead of doing all Cement All? Are there pros and cons to both? Thanks

@joscreatesco.4946 2 жыл бұрын

@Lilsquid305 3 жыл бұрын

Hey, may i know if the cement youre using is just a plain white cement? Or is it some other special kind?

@joscreatesco.4946 3 жыл бұрын

No I’m using a mixture of plaster (gypsum) which is white and cement that’s has sand mixed in it

@ghadeerhasan1883 Жыл бұрын

Hello You do nice job thanks for showing that amount of details. I need to know if the regular white cement we find at the construction shops does work and what is plaster of Paris, does it have other brand names? Something else please, what do you think about adding sand or white glue to the mixture? Thank you so much for your patience.

@joscreatesco.4946 Жыл бұрын

Just add plaster the brand is called plaster of Paris

@joscreatesco.4946 Жыл бұрын

You can always experiment but i have never tried it

@meiisyrin1899 3 жыл бұрын

Hi, I was wondering what you do with the waste and how you clean the bin after?

@joscreatesco.4946 3 жыл бұрын

The waste usually dries up quickly. I have other molds I fill the remainder with. The mold i clean with soap and a brush works just fine.

@Raynecolwell 2 жыл бұрын

You can also spread it out thin and let it dry. Crumble it up and use it as speckles in your next pour.

@viennacarbajal5636 2 жыл бұрын

Do you notice if the plaster of Paris also helps in lightening the color of the grey cement? I’m struggling in wanting to create a cream/ivory color. Have you tried this before?

@joscreatesco.4946 2 жыл бұрын

Yes it does lighten that y i mixed the two, i have other videos that shows it.

@jacquiericard5190 2 жыл бұрын

Me too! Doesn't matter how much white paint I use, it always comes out light Grey!

@Showmake 3 жыл бұрын

I also found Jesmonite alternative in our country. I haven’t tested it yet and I don’t know how it works.

@joscreatesco.4946 3 жыл бұрын

If Jesmonite ever reaches the states I’m buying a whole bunch but heard it’s just a brand there are ways to make it just wish i knew the ingredients.

@BrittVandeLooverbosch 11 ай бұрын

acrylic resin is the same as jesmonite .you have the powder and the liquid,do this together in a mold there are calculators on the web available for this do you want terrazzo,then make powder-liquid and a color .spread this on plastic until it hardens, break it into pieces and mix it back with a large amount of powder-liquid and pour it into your mold. Cure for 20 minutes, sand with water

@deepikatrilokekarshringarp5044 2 жыл бұрын

Hi.. stumbled upon on your video its white regular cement/concrete right? Just wanted to know and these last long how long? And the sturdiness?? Also can u use chalk paints in these?? And how faster does it dry up? Does it dry up because of POP??

@joscreatesco.4946 2 жыл бұрын

Plaster of Paris is the white and the grey yellow color is cement for concrete called cement all These are a bit easy to break still. The gypsum adheres well to it. Acrylic paint makes it dry super fast but I still let it cure for 4 hrs. Plaster of Paris doesn’t accelerate the drying time

@deepikatrilokekarshringarp5044 2 жыл бұрын

@@joscreatesco.4946 Thank u so much for your response what should be the ideal ratio of water, white cement and plaster of paris?

@josjoseph1883 2 жыл бұрын

@@deepikatrilokekarshringarp5044 make it thick and pancake textured don’t have it watery like mine. Add 1cup water, 1cup pop mix, 1 cup cement mix then add half a cup of each to make it thicker.

@deepikatrilokekarshringarp5044 2 жыл бұрын

@@josjoseph1883 thank you so much! I will keep you posted how they turn out!!

@deepikatrilokekarshringarp5044 2 жыл бұрын

Which sandpaper did u use for sanding.. i tried doing one but that left scratches.. does it have to fine one??

@isabelledesu Жыл бұрын

whats your sealer

@MsHaniepot08 2 жыл бұрын

Hi may i know whats the second sands that you put ?? i use white cement and grey .. if white cement the color turns to light colors plus the arcylic paints 🤣

@joscreatesco.4946 2 жыл бұрын

Cement and plaster

@satoriroblox4eva 2 жыл бұрын

Is this just a regular acrylic paint? Or it has to be the specific brand that you used?

@joscreatesco.4946 2 жыл бұрын

Any acrylic works

@namnams08 2 жыл бұрын

Hi! Is there another alternative besides using acrylic? Also what’s the difference of using this while mixing with the powder or doing it after?

@joscreatesco.4946 2 жыл бұрын

Cement Pigment oxides, heard buddy Rhodes sells those, mica is an option but you have to use ALOT. I use the gypsum simply so the cement all doesn’t grey out my pigment. It’s turn my blues grey greenish color. I want the pigments to show better.

@swetakhona7361 Жыл бұрын

Hey how to make this stronger I made a tray n demoukded it the same day ca e of fine but when I tested it strength broke

@joscreatesco.4946 Жыл бұрын

I have a new video where i add acrylic polymer and titanium dioxide to avoid the fragility of it

@funnybunny5046 2 жыл бұрын

hi! may I know what did you use to seal them? thanks before..

@joscreatesco.4946 2 жыл бұрын

Liquitex Gloss Sealant

@funnybunny5046 2 жыл бұрын

@@joscreatesco.4946 thanks!!

@minsvt1768 2 жыл бұрын

When i use acrylic paint it seems like it doesnt well dissolve with the cement. While its drying there are dots of paint and smears during sanding 😭

@joscreatesco.4946 2 жыл бұрын

You must mix it well also thick body acrylics may cause that too

@harshadagunjal2855 2 жыл бұрын

Hey.. what can we do to make it more stronger??

@joscreatesco.4946 2 жыл бұрын

I’m working on experimenting with a acrylic polymer stay tuned…

@fatimaihsan2019 2 жыл бұрын

@@joscreatesco.4946 have you done it by now?

@jessicaaustin33 2 жыл бұрын

Would this mixture work for soap dishes?

@joscreatesco.4946 2 жыл бұрын

I have soap dish molds i haven’t used yet but you would need an exceptional sealer

@tarotbytheempress9613 Жыл бұрын

Your paste looks really smooth mine isn't that smooth...how

@joscreatesco.4946 Жыл бұрын

Plaster is mixed in

@adobeblue4360 Жыл бұрын

hi, I see all the materials listed except the cement. what is the exact name of that product?

@joscreatesco.4946 Жыл бұрын

Cement-all

@GG-xz7nv Жыл бұрын

Nice. What grit sandpaper to you use ?

@joscreatesco.4946 Жыл бұрын

Some generic sand paper I’ve had laying around for yrs so i honestly do not remember but was very fine

@thepzarts 11 ай бұрын

How much time does it take to de mould?

@joscreatesco.4946 10 ай бұрын

Demolding is quick

@divyarajput2588 2 жыл бұрын

Hi Can we use white cement instead of?

@joscreatesco.4946 2 жыл бұрын

Heard it crumbles

@kaizenemistry2706 2 жыл бұрын

This is super cool! You mentioned you cure these trays, how does the curing and sealing process work? Also, any resources you can recommend to learn more about making these trays

@joscreatesco.4946 2 жыл бұрын

Curing i let them sit out for a few days, haven’t found thee sealer but i just ended coating them in resin