You have to give CZ a lot of credit for helping Colt make the return of the blued Python happen. I am shocked you can get a high polished, deep royal blued finish for only $100 more MSRP than a regular stainless. I stand corrected and was wrong, I thought CZ - Colt would only do a very limited edition, special Custom Shop only run of a blued Python and it would start at least in the $2,000 plus range and we would never see a full regular production blued again. Now, let's hope CZ - Colt adds the blued to the Anaconda, Kodiak, Grizzly and King Cobra series as well.
@ronenton4037Ай бұрын
Very interessed in a blued Anaconda/Kodiak
@sonicslow995Ай бұрын
Its not a high polished royal blue like before. Seen one at my local shop and the smith classic line looks better.
@Mike193Inf24 күн бұрын
I like the Hillary Hole-less Colt myself. And the blue on the new 4.5" Python is amazing.
@garyking3697Ай бұрын
Have you looked at Missouri Bullet company? They make a Hi-Tek coated lead bullet that will stop your leading problem and they are reasonable priced. I had the same leading problem on a S&W 625 I shoot using lead bullet, when I switched to the Hi-Tec coated bullets my leading problem went away. Love Colt's blueing job on your revolver they can still do it right.
@jeffryrichardson9105Ай бұрын
Very nice revolver! Great video!👍🏽😀❤️🇺🇸
@geraldf.1222Ай бұрын
I would also check for unburned gunpowder underneath the "star ejector", because that causes the cylinder to "bind up" as well....
@BATJACJWАй бұрын
Thanks for sharing the info.
@kc0lifАй бұрын
very nice colt python by colt. i usually like stainless but blue is good too.
@edljnehan2811Ай бұрын
If you ever owned or shot one of the blue Originals you would think differently. The blued is what all of us old timers relate to. Just Like the Model 29 44 Magnum you wouldn't want that in a stainless😮
@jaredarchuleta1239Ай бұрын
Did you do something to highlight the lettering it looks kind of pronounced maybe it's just the lighting
@ThecrazyScotsmanАй бұрын
Those grips are absolutely perfect the fit is incredible you can tell that from your video on them. Sorry I haven't commented on the radio shows last couple weeks I went Home for the first time since I moved here in 2005 was great to see my brother and see my nephews
@allenw969Ай бұрын
In my Python, I have been using a low-recoiling 105 gr round made for Cowboy Action events. It has the a Hi-Tek coating, so leading does not seem to be a problem. I am not interested in loading my own cartridges, so I am glad someone makes and sells these.
@machone758014 күн бұрын
NICE!! Love the blue finish!
@edwardpetty5401Ай бұрын
I love those grips. Never held the new Python but love my old one.
@edljnehan2811Ай бұрын
Since they came out blued I want one of those so bad. I had one of The Originals in the early 1980s and it was absolutely a dream gun unfortunately I traded it off for a Model 29 Smith & Wesson. I don't regret it because I absolutely love the Dirty Harry gun however I would love to have a blue Colt Python again😊
@normanmallory2055Ай бұрын
I’ve fired a lot of full wadcutter bullets and they were very accurate with no leading problems ! The 158 grain SWC I fired several thousand of those ! I would shy away from moly coated bullets , the moly builds up and is difficult to remove ! Hunting I used hard cast or jacketed bullets ! Great review , beautiful firearms the blued ones are !
@John1911Ай бұрын
We just picked up a 4” stainless. Thanks for the 586 info.
@TheLoneRanger74525 күн бұрын
OMG IS THAT BEAUTIFUL 😍 ❤️, Sense Colt brought the Beautiful Black & Blue Mirror finish back I've been wanting one in 4" , maybe they will do the fire case hardening receiver next . ❤
@terryballard4674Ай бұрын
I have the stainless 6"....what a work of art!
@Mike193Inf24 күн бұрын
Get rid of those junk sights and you'll have the perfect firearm. You're well on the way with the Deer Hollow grips. I have a set of those too on my 4 1/2" blued. I went with Wilson gold bead front and Kensight Elliason rear.
@maxskullic9879Ай бұрын
Damn that is a sexy gun!
@edljnehan2811Ай бұрын
I would love a blued 4-inch😊
@RevolverTvАй бұрын
You can probably shoot nothing but magnums through that thing unlike the old ones and be fine.
@mag318Ай бұрын
Love the beautiful grips from Olaf.
@BATJACJWАй бұрын
The best!
@jeffreylocke880829 күн бұрын
The only thing I would do is use the Wilson Combat aftermarket steel rear adjustable sight and replace that rear sight that came on it from the factory.
@montecraig703225 күн бұрын
Shooting a hard bullet slow or a soft bullet fast gets you leading.
@user-ii4hc2si9xАй бұрын
J.W., you can't use any kind of speed loader with the stock target grips that come on the Colt Python, you either have to go with the service wooden grips, like the kind on a police revolver, or some Pachmayr grips, that what I did, and they work fine, no more issues with the loader getting stuck against the grips. In my opinion, Safariland speed loader are crap; I was issued those to carry on my duty belt, and many times the rounds just fell out of the loader and on the ground, which is not good if you're in a gun fight. The first and best speed loaders hands down are the HKS, the original speed loader!!!
@MysteryWheelgunnerАй бұрын
Excellent bookmatch on the "weird wood" grips. Can you do some range footage with the Pythons?
@gewglesuxАй бұрын
I have 2 of the same(blue/stainless) but in 4.25 . Mine isn't as flash as yours. My engraving is standard. I did change my grips also with Hogue grooved. I also swapped the sights to the wilson. HKS actually has a loader model made for the python.
@onesimocamacho6629Ай бұрын
Que belleza de rreborve de cuántas pulgadas de cañon
@bmark1730Ай бұрын
Do you get info on when engraved models are released? I never find out til they've been out for a while. Is there a place that shows upcoming engraved firearms?
@marshallpetrik2339Ай бұрын
How did you do the gold inlay on the Python logo?
@edljnehan2811Ай бұрын
My, that's a big one😅
@gallor1ableАй бұрын
GREAT VID BEAUTIFUL COLT, Question: do the roll marks come with the gold inlay like yours or is that something you did? my 4.25 blued Python will be in by this friday of asking this question can't wait to hold her Best Regards
@ieabm27 күн бұрын
Its paint. Testors Model Paint (Enamel). Fill it in with whatever color you want, let it dry, wipe off the excess w/ gun cleaner solvent or nail polish remover and enjoy.
@MrJdebestАй бұрын
Are the internal works the same as the 70s model ? Was all hand fitted with not great interchangeably with parts.
@BATJACJWАй бұрын
kzfaq.info/get/bejne/n8uepKunqJ3YoXk.html
@alanfine9825Ай бұрын
I had an original blue 6" in the 80's and sold it for $$$$. I always regretted it as they stopped production in '05....and used ones were way too expensive. I bought the 4.24" SS a few years ago, but this year purchased the Blue 6"...I am Thrilled to have my Baby Blue Again. QUESTION: Cleaning burn marks on the cylinder with the SS I use a lead removal cloth, but I am afraid to hurt the finish on the blue version...any suggestions?
@BATJACJWАй бұрын
I have not tried anything yet due to the nature of high polish blued does tend to wear faster.
@therealhawkeyeii7888Ай бұрын
For just a little more, you could have found a real one on the used market. LOL. Just kidding. Very nice.
@BATJACJWАй бұрын
I had a old one I traded it and glad I did, i like this new one better.
@therealhawkeyeii7888Ай бұрын
@@BATJACJW I've had three in my life. The last one was a snubby. When it got to where I could get $1,800.00 for it, I sold it. Should have hung on longer, though, since now they sell for a good bit more.
@BATJACJWАй бұрын
That's about the price I seen for a 6in blued vintage python's in shops out here. Post 2020 prices I seen been 1500 to 2000 tops.
@morriszachrisson8359Ай бұрын
What happened to the grips? Have you spilled coffee on them?
@j.farris5472Ай бұрын
That's the figure and grain of the wood Bozo.
@morriszachrisson8359Ай бұрын
@@j.farris5472 The same as on your forehead Nabozvaro?
@j.farris5472Ай бұрын
@@morriszachrisson8359 The only thing on my forehead is your mom's snail trail blozo.
@j.farris5472Ай бұрын
@@morriszachrisson8359 The only thing on my forehead is your mom's snail trail blozo.
@jrkatАй бұрын
I’d love to have one. Colt brought out the blue after I got my stainless, before law changes by gun confíscation now in the communist republic of Washington the State Patrol is compiling a gun registration on law abiding citizens 🤬
@sonicslow995Ай бұрын
The new blued ones look mehh. Also why 3 ribs on the 4in gun, and 5 ribs on the new 8in guns. Yuck
@herbertblevins7077Ай бұрын
LEWIS LEAD REMOVING KIT CAN FIT THAT PROBLEM. PLUS USE CAST BULLETS OR USE LESS POWDER. NOT A REAL PYTHON ANYWAY.
@RockebungeАй бұрын
спасибо мужик! получил эстетические наслаждение от ролика 😊