This was my dream when I owned my 3 sedan

You should definitely make more mazda vids! I'm in the process of going turbo in my 2.5 as well! Great Content!

That’s fire 🔥 can’t wait to swap the 2.5T in my 05Mazda6s

I would love this in my 2.0L Mazda 6 sportbreak from 2009. Would love to add a bit more torque and hp to it. Add some coilovers too.

One of the Finest sorted Turbo 3s I’ve ever seen, Very Nice! I like that top floor parking building, you should find that building in Vice city, jump off of it, just for fun don’t forget, the car I’ll just bounce around then either go fix it at the paint shop or car jack another one.

Loved seeing this. My MZ3 5 speed is on the way out and I’m very close to buying a blown MS3 and harvesting the 6 speed transmission and turbo bits for my 2.5 swapped 08 Mazda 3. Seeing him run 10psi reliably is reassuring too.

very nice to know, thank you for all your hard work. very hard finding anyone doing this with a 2.5 mazda. ive been debating how to go turbo with my 2.5 mazda 6. you've given me inspiration. one question, hows the transmition holding up? how much hp can i go without upgrading it?

Great video I have a 2008 Mazda three hatchback 2.3 and I’ve been wondering what I need to do to swap it to a bigger engine.

nice Video, I am about to start a 2004 Mazda 3 sedan 2.5 Swap build and going to boost, pretty much same path

Really appreciate all the videos you make man, just out of curiosity, was he running 14lbs on stock internals? I'm starting a supercharged 2.5 swap into my 08.5 sedan, I'm probably going to beef up the internals a bit anyway but I just wanted to know what he was running.

Very nice. Finally got my 2012 Mazda 6 2.5 boosted last week. It's cool that other people are finally getting around to boosting their 2.5.

Wow a lot of mods and really awesome performance modification that I didn't even know would be possible!!!Any input so as to add more power to a stock 2.0 naturally aspirated engine sedan 2011 like mine ?? Cheers really great vid !!!

i do have a 2.5L intake manifold from i believe a fusion or an escape. cant remember but very similar with some custom work. Vacuum solenoids ports for the sensors need to be ADDED to the body of the intake as well as a custom plate for 2.3L throttle body. Nothing crazy was a pretty straight forward swap with little resources.

This is sweet

I have a 09 3 sedan I can’t wait to start doing this stuff

Hopefully I can do this with my sedan someday

nice build. Any way we can get some pulls?

I did the swap with my 04.. yes it def is more work.

Honestly you don't even need a 2.3 mzr for the 2.5 swap. As a whole, the 2.5 duratec is capable of handling a turbo and as much as 500hp; unless you're running an automatic transmission, I wouldn't push too far past 350hp. - You'll need to tap into the oil pan (as high up and to the left of the drain plug as possible, clearance issues in oil pan right side) for the oil drain, install an oil cooler sandwich plate for turbo oil feed. - Install an aftermarket pcv plate along with a good quality baffled catch can (no eBay cheapies or you'll be leaking oil everywhere) in most cases you don't need a vented can unless you're pushing 350hp or more. - Purchase a Mazdaspeed 6/3 turbo exhaust manifold/downpipe. If you don't have the hood clearance like with the speeds, you can run the turbo intercooler feed underneath the motor like Ford does with newer vehicles. The top mount still looks sick if you can get it to fit but running underneath will increase thermal efficiency. - Whichever route you go, I recommend wrapping all of the intake/intercooler piping with gold reflective tape because it reflects up to 75% of ambient heat, keeping your intake/engine temps down. - You will need an mzr cylinder head to run direct injection, this may require an mzr 2.3 oil pan, valve cover and intake manifold. - I recommend port injection because it's more efficient, reliable and cheaper if you don't already have the 2.3 donor parts. - Most importantly, check out car-part.com before going to whatever scrap yard to buy your 2.5, I had a yard quote me $500 bucks for a full 2.5 assembly but I found mine for $175 on the website listed above. Good luck y'all and have fun with it! Any questions? Leave a reply, I'm currently in the middle of swapping my 1st Gen Speed 6 so I'm always here to help.

Exhaust is too tame for my taste but AMAZING BUILD.

I used a speed3 TB instead of the 2.3 one in my swap. I can’t wait to turbo build mine. I see that Drtuned sticker. I’m tuned by him as well NA on 93.

What turbo manifold did he use? The 2.3 log manifold?

This is my dream with my 2.0i.

Dude this is so sick. If I ever find a cheap donor MS3, I’m definitely swapping some stuff into my 2nd gen 3 sedan.

Project Chimera; 1992 Mazda MX3 gs, Mazdaspeed 6 transmission, custom Drive shaft, rear diff with rear subframe and components from 1988 Mazda 323 gtx, the V8 out of the 1999 Ford Taurus SHO 3.4 l quad cam 32 valve V8. At the bare minimal I could make it front wheel drive with either the five-speed or 6-speed since from what I understand it will bolt up to those Transmissions along with the mtx75 out of the Contour. You can also do something crazy and use the mtx75 Contours differential which is a 4.06 to one final drive instead of the 3.6. Due to the drivetrain using shift cables I might be able to fit the drive shaft between the Center tunnel of the car. The electronic limited slip uses a 5 volt signal which I think could be regulated with a adjustable 5 volt signal hooked up to a map sensor on the engine. Madness I tell you! Madness! By the way the car I want to fix up looks like the one in my profile pic but has orange racing stripes. Like Speed Racer. Was supposed to be 24 lemons racer but I rescued it before they could put a roll cage in it. Lol.

Whoa 😍

where did you get fidanza flywheel from . I`ve cheked in their website and could not find flywheel for that particular engine ?

A misfire in cylinder means the motor is shot? It's a simple fix lol

So I have a 2011 mazda 3 and I was wondering where i could find a turbo manifold that fits onto it. If there is any website or just something I could look up and find that would be so much help

Какой Программой производилась корректировка топленых карт и остальная настройка??

Good afternoon friend, question, you had to lower the compression of the engine to be able to install the turbo. I have a Mazda 3 2.5L and I am going to add a turbo to 8 psi and I wanted to know to prevent it from bursting.

How do you tune these? I have an 04 Mazda 3 that I'm putting a 2.5 in bc my 2.3 blew. I'm not really looking to mod it, but figure I might as well get a tune if it's cheap enough to do since I'm already swapping ot

Hello, how are you? I am from Kuwait. I have a Mazda 3 hatchback. 2008 The car's engine is 1.6 and I want to put 2.5 and most of the workers tell me they cannot. Is there a transfer please benefit and what parts do I need, thank you

I'm currently in the process of putting a 2.5 in my 07 Focus

For the shift cables he talked about using shift cables from a 2011 Mazda 3 2.5. He didn’t specify if he got the cables from the 5 speed or the 6 speed model Mazda 3 does it make a difference on what cables I get?

What axles did you use

What’s the top speed after the tune? I turbocharged my but haven’t tuned it yet. How should I go about doing it?

I’m trying to turbo my 2.5 but I can’t find a turbo exhaust manifold for the life of me. Can u link the eBay one you used?

Hi mi name is Juan How did you get your computer to recognize the turbo? Or you change?

Hi Colton ,I have a 06 mz3 with a blown 2.3 in it and am ready to pick up a 2.5 duratec from a ford fusion. Could you see if Arseny knows whether or not the 2.5l motor from a 2013-2016 fusion works? Considering they are still Duratec and not ecoboost motors. I'm seeing guys use motors from 2010-2012 fords and up to 2011 mazdas all the time but cant find anything on the 2013-2016 ford motor. Thanks man

260hp isn't even breaking a sweat for that 2.5 bump it to 350-370whp asap!

So I Can swap my 09 Mazda3 2.0 to L3 2.3 (aspirated & turbo) or 2.5? 😦 P.S: that 2.5 is it from? Nice vid!

how about a 350z with ls swap now that would whoop both of these, good vid

We are getting ready to do this on my son's car what/who did you use for the tuning??? Its a 06 Mazda 6.

17:22. I really want to get that guage pod set up. For some reason that always seemed cooler to me then then piller pods on these cars

I have a 2010 Mazda 3 Hatch 2.5L stock with a K&N intake. What could I do to boost power besides a tune?

I have 2008 Mazda 3 1.6 turbo diesel. I want that blow off valve , it will be so funny that sound coming out off a noisy diesel,

hey i already have a 2012 mazda 3 2.5 and was thinking of boosting it. i’m trying to find a complete kit for it but can’t so i guess i’ll have to part it out...i just can’t find everything i need

How did you get to tune the computer? I have practically the same mounted unlike the engine that mine is 2.3 and the transmission that is 5 changes. my mazda has problems in the setting so far I have been able to get 220 horses but the mixture goes crazy after 5 rpm and dries. I would like to know how you managed to set it?

Hello! I have a 2017 Mazda 3 2.0L I4 Engine, I am looking for a turbo kit that fits my car. Have any suggestions??

Some idiot totaled my 2011 2.5 sport by running into it while parked a couple weeks ago.... guess it’s time to go speed3

Hello whats a good cold air intake to buy for my mazda 3 2.5 2010

I have a 07 2.3 Mazda 3 with k04 mazdaspeed turbo and everything needed running super low boost like 8 psi max which rarely runs that… all stock motor and fuel system think I need a tune? Thing runs amazing doesn’t miss a beat

I’ve got a 2014 Mazda 3 sp with a stock 2.5l 5 cylinder producing 185. The car’s bone stock but was thinking of paying someone to slap a turbo on her. What do you recommend doing first so she’ll be able to handle the power?

I have a 2009 auto 3 and want to get more torque out of the NA 2.3. Any tips? Also I am considering swaybars and subframe bracing.

would it be possible to do an auto to a 6spd manual swap? and would it require any ecu updates?

Good day, new to the Mazda scene. I have a 2012 mazda 3 s grand touring (2.5L) automatic. I saw the video, but I’m confused a bit, I want to turbo my mazda, does this mean I need to do everything he did to his engine? Or can I purchase a turbo kit and get my mazda tuned afterwards? Thanks.

This is pretty cool and unique I must say! I have a Mazda 6 GH wagon 2011 which I was thinking of boosting as well for the fun of it, already a 2.5L... And now I've seen this vid. I just had 2 queries, is the log manifold for a speed3 BK or BL ? And what happened in regards to the ECU all I heard was stock, hows he controlling the boost etc. Cheers!

I have an 04' mazda 3 hatchback. In the future, I may swap a k20 k-series engine

Very different but could have bought a blown speed3 rebuilt and made 400 probably pretty close in price too compared to the 280/300 this makes

I have a 2011 mazda 3 sport grand touring, it is 2.5L 6 speed manual + R It has good power but I would like to increase it, do you know how many psi it supports without forging anything?

hi do you change the computer ?

I want this guy to take me for a ride in his car.

I have a 2008 mazda 3 sedan with around 230,000kms on it (143000 miles) and it has never had any major problems. Is it still worth spending money on modifications? I just don't want to spend money just for the car to die.

I know this is a 3 year old post, but what I'm curious mostly about is the tuning. I tune a lot of GM stuff using HP Tuners. I have an 06 Mazda 6 with a 2.3L and 5 speed trans. I'm very capable of building a turbo setup for the engine and i was thinking of running 5 or 6psi of boost, but my biggest obstacle is tuning. HP tuners does not support the 06 naturally aspirated ECM. I'm sure there are other tuning platforms that can, or maybe it's even possible for me to switch the ECM out to an 07 or 08 year. Not sure yet. So how did you go about getting it tuned? There's no way in hell i would even consider running it without a tune lol

Question: I have a 2006 Mazda 3 2.5 Automatic, if I wanted to install a Turbo would my car be able to handle it?

How did you side mount your plate???

I can't find the turbo manifold on eBay. Is it a generic one that you modified?

👍🏻

Following. What parts did you use off the 2.3? Everyone says you need parts from 2.3 and nobody wants to share what ... It's like nobody builds the 2.5. I want to boost mine bad

I have a 2.5S hatch 2010, really wanna do this to mine, would i be able to just slap a Mazdaspeed turbo manifold and turbo on there or do i needa get something else

I have a Mazda 3 sedan I wanna do this I need help

He stated that the swap would be harder on an 04 Mazda 3- but does that imply that it is possible? Without a drivetrain & transmission swap, that is. Interested in getting a new car as a daily driver and doing some work in my current (04 Mazda3 Sedan, 2.3). Motor needs some work, but I'm attached to the car because everything else is spotless- so why get rid of it when it can be a toy?

Ah yes, the Maazda 3.... Mahzda!

Can get those ford 2.5s for 250-500$ usd

With no beefed up internals, my guess is that he’s had some issues since this video was made.

What do i need to do to turbo my 2018 2.5?

What downpipe/exhaust???

So I have a 2005 2.0L Mazda 3 BK Hatchback and I’m planning to put a 2012 2.5L Mazda 3 SP 25 BL Hatchback engine in it. Is it a possible conversion or waste of time?

Wonder if I could put a 2.5 in my 08 sedan

Is the windscreen cracked? 11:23? Or its just my eyes?

This guy bought the entire engine for 1200 CAD while it cost me to repair mine in a shop as much...and there was nothing major to fix 😂

How do you tune de ECU..?

I got a 2010 mazda3 6 speed manual I want to make I turbo do I just swap engine with a ms3???

Can somebody just take a world tour to ressurect our MS3 here in Botswana 😮

My 07 2.3 has 261,000km right now and still very strong

So is this a speed three cuz that's what I plan on getting

I wanna turbo my 2.5 on my 2018 3, but I have the skyactiv and high compression + turbo means nightmare to tune.

What tuning software did u use

Will this turbo instal work with a 2.0

How would the 6 speed mount up to the 2.5 that was originally automatic?

wouldnt it be easier and cheaper to just buy speed3?

I have a 2012 skyactiv that I want to swap the 2.5 in since that seems easier considering this year had the 2.5 variation if I'm not mistaken. And before you ms3 lovers comment I don't like hatchbacks so I'd like the power in the sedan

How much did it cost to turbo the car all together

Why wouldn’t the speed cables work for you?

Where do you guys buy these 2.5 engines for a fair price?

Could the 2.5 swap be done from an 06 2.0?

I’m from USA I have a 2009 Mazda three auto 2.0 sedan this makes me want to make mine into a speed now

Can you not get an accesport for it ?

Do you change the ecu or no ??