Sometimes it’s good to get out of the tractor and move

Agri videos Dumfries I don't agree with you on this. I have been using Fusion since 2007 till last year but also I had pleasure use Welger and Claas, in New Zealand I have been around Krone. Back few years ago my boss send me to help his friend contractor as well who was running Khun combi baler. Apart I passed him with bale count by over 60 I did had to pull him out when he got stuck because of double axle on wet land. He also had trouble picking up wet stuff pick up was covered in mud because baler was sinking down grass was jamming in the pick up. Not that he didn't have experience baler just couldn't take conditions. Its fine to work without pressure but when the weather is breaking and every farmer wants you then you can see what Fusion can do when you really push this machine to the limit.

@@model6080 Perhaps you are right with the Fusion, I have no experience with it. But comparing kuhn vs claas, kuhn is far better than claas

@@model6080 surely a single axle goes down quicker than a tandem? They're the same weight at just over 6 tonne and the tandem axle balers have a bigger footprint even when the single axle is on wider tyres

@@Mr93JWM well if that would be 100% right what you saying most of contractor's in Ireland would have double axle balers but they choosing Fusion. Single axle on wide tyres is easier to pull than 2 axels. Plus you have much bigger ground clearance with Fusion as she is high.

@@model6080 the chamber is a long way up for sure but that wrapper ring doesn't take much to pop off. Each to their own, both have banefits ✌️

Contractor has one but not as good as my krone in my opinion

Vicon and Kverneland is the same

We don’t make money. Only time a farmer is rich is when he sells his farm.

lot cheaper to do your own here in nz. Full contract job here is around the $50nzd/bale. 25pound.

Tomherbs krone did in 2002...

And Wermeer has got one right now. As a consept it look realy good.

@@erikhakansson495 It's only a baler of 5' x 5' bales. No wrapping

What model do you have?

Bullshite.... :))

Well...Mchale must be the most "under developed" baler of these.. They haven't managed to make an Isobus control on it yet ffs...There's too much distance between the pick-up and rotor so it clogs up on short grass... and if you should manage to fill the chamber with short grass the bale *will* get stuck between the rollers on the wrapper...They may be fast under perfect conditions but that's all. The chopping is no good, and there's not much grass in the bales compared to the other balers.. I could go on and on, but there's no need... you catch the drift.. :))

I think the only one baler overdeveloped is the Fastbale from Kverneland. All the rest still need to stop for netting

Yea must be a fusion fanboy, the McHale is quite far behind in many respects as mentioned. It's just fast because of the transfer. Nothing special about a fusion bale and that intake is the worst.

Yea thats an abortion of an idea that thing.

Krone has had that for many years now...

@@mattafakkah he was talking about Mchale not Krone.

killickfarms yes it would be very good but not for very heavy crops like we have here in Ireland because then you have to drop gear or 2 and daily output is smaller.

They be only any good in very light crops if you are doing anything over 10 bales + @ acre it wouldn't work it full the prechamber to fast

I demoed a kverneland fastbale and I thought it was a piece of shit. The absolute most it can do is 57/60 bales an hour. In a heavy crop you still have to stop because it's not fast enough. It runs out of time to do everything. I also demoed a mchale fusion3 plus and I loved it. But what guys are saying here about the distance between pickup and rotor gives you hard time with short wet material. That is true. Bale transfer is quick. Wrapping is quick. I was doing 65 bales an hour baling and wrapping in a light crop. Doing 16mph and wrapper didnt care. I bought a new claas 455 because you can make 48-53" bales instead of only one size like all the rest of them. It has 2 more rolls of wrap storage than the rest of them. It has MPS which will put more in a bale. And for me they had a better financing deal at the time which also helped me. It was a toss up between mchale and claas.