Hold the damn lock still!

Dude thanks so much for this video. You saved me this morning when my lock was not working. Amazing, thank you so much,

Put it in, push down! Thats all you needed to say

IT WORKS! I tried 2 other video's and the first one I ended up injuring myself twice, and the second wasn't even close. I was so excited I did a happy dance lol

Very cool, the only type of lock I knew how to pick or bypass before was a pin and tumbler.

Subscribed! Thanks for the knowledge

Brilliant... and very well explained. Greetings from Belgium.

"Its probably hard for you to see this" well in that case try holding the lock still FFS.

skip to 4:30 to get it over with

I just did this by using an old hacksaw blade and grinding it down. the thin metal you use has to be very thin but strong like an old clock spring. or obviously like I used an old hacksaw blade ground down. it works a treat. thanks for the video mate

Scam School showed a similar bypass technique with this particular kind of lock however they made it seem much more fun

Great video and it is nice to see the inside view of the lock.

I appreciate the info, but please calm down w/ the motions and move slowly. Such rapid and erratic motions with your hands and the prop are distracting. When in doubt, move slowly, move clearly, and move simply. Thanks much!

I just ordered the tool…..thank you WW

I thought you was a great video and explained excellently.

Worked for me thanks very much

Is the Sesamee AB410 the same and easy to bypass, or is it pretty secure? I'm looking for a new small padlock I can travel with.

Thanks guys! I've had to bust or cut several several pad locks this year because of my poor memory and my wife losing keys.

lost the combination to my bike lock when i was younger, fortunately i lived next to the tracks so i found an old rail road spike. we were also building a brick patio so we had spare bricks...not hard to solve the equation

thank you for letting you know about the information I will tell my friends and family thank you so much bye.

Can you use a cut up aluminum can for the lever??? Or does it need to be steel???

kool vid are there any pick proof locks u can use for a gym locker....?

Anchor Las is also offering very neat padlocks.

Ground .009" feeler gauge down and easily opened two master locks this morning, worked as intended. Cheers, #SeattleRingHunter

ITS Tactical, thank you for sharing this. Just subbed you. -Corey @ PREPARED 2 THRIVE

I have one of these locks and lost the combo over 4 years ago but kept it.... If I open it with your tool, will I be able to assign it a new combination? I went to your site but can't find the 2 piece pack you mentioned...only a kit with other things I have no idea what they are. Do you still offer the 2 pack mentioned here? I would like to bring our old lock back to life if I could? Thanks

A .012" inch automotive feeler gage shaped with A Dremel moto tool works great as well.

This video literally could have been 20 seconds long.

Should you remember the combination after using the recorder will the lock function normally?

I used this method to figure out my bicycle combo awhile ago. Lol it works.

Does that work for the locks that have the combo on the side instead of the bottom?

Bet Master lock luvs you guys ROFLMAO !

For those who only want to see him open the lock: 4:07

Thank You

Thanks

is this possible to do with a nail filer or a bobby pin/ paper clip?

That padlock exist since decades. I saw this in the 70's. If only I knew when I was a kid. 😤

Question : What is the thickness of the “easy decoder” ?

will this method work on brinks brand of lock? .looks similar I have one I can't open..tired changing combination and goofed...old combination and new one I thought I was setting does not work now..

o my question is this technique seems rather particular to band/model. Does this tool work with all/most multi-wheel combination locks?

Is it possible to use this same technique on a combination gun trigger lock?

Does that work on a suitcase combination lock? Specifically a Hartmann vintage suitcase.

I found a 4-number dial combo lock in the military 45 years ago that was being thrown out. First number is dialed to the left. Any idea how to figure it out? I had another like it that I opened just by twirling the dial a few times. Don't seem to be able to do that with this one.

Hi mister! What I should if I don't have that kind of key?

Is this the same thing used in the other video to open the tall blue lock

I bought a brand new 175 lock a month ago. Since all these videos (yours and many others) have been posted MasterLock must have read them and redesigned these locks. They seem to have tightened up the tolerances plus addes some kind of internal block to prevent even thin shims from being slid in. Even using a piece of a coke can I can't get it past much of anything. Also tried decoding the wheels with a thin shim looking for the one where the shim goes deeper but they all seem to be the same depth.

Does this tool work with the Sesamee combination padlock also?

you do no so many crooks are loving this vid inc me.

Once you open the lock with the bypass tool can you use the reset key to enter a new combination or does that only work if you have the original combination entered on the wheels. Thanks

Des this work and how, on a briefcase or security case which yo have forgotten the code. i have a case (my own) that has 2 set of 3 dial combos. and i would love to see what i have forgotten. other personal situations - all my own! suggestions? thanks

ITS Tactical , Can could these also be used as quick sticks, I can't see any difference between them?

How about figuring out the combination numbers, after you unlock it ??

thanks!

So how does it decide the lock? Was hoping for a way to figure out a lost combination.

I wonder if this same tool and concept would work with luggage locks that are multi-wheeled combos also? (mainly briefcases)

I have the same padlock.. after i set the correct combination, why i have to press 2 or 3 time to open the padlock.? I think theres a malmechanism in my padlock.. could you help me to solve it?

You say brief video... but I see a 6 minute video on how to push a super thin piece of steel in a certain direction.

Thanks 👍🔓🔒🔏🔐🔑👀👀👍

can you open a Master Lock M40XDWD disc combination lick with 4 wheels & letters instead of numbers?

what are the tricks to ensure it shall ne inserted into the third slot and the left side?

so.. what lock do you Brian, use for your gym lock? Tell me that.

How do you figure out the combination after you open it?

What's the difference between the ez decoder and the quick sticks?

hay whats up.. i use these sticks for work as a foreclosure inspector and they are great. but i just ran into a brand new combo lock with a new blocking device installed to stop the stick :-(.. u guys need to make something to bypass the new system :-)

Hi Purchased 2 sets from you same lock doesn't come close to working was careful but broke 2 material is crap minimal resistance and it folds up like a cheap lawn chair! Your lock was either prepped for video or something is up! Let me know what you think I review these products and write fair reviews I mean I paid good money for them. Just by watching video i see plenty of clearance on your lock same Master 175 mine is so tight impossible!! Thanks

Doubt if this will work on a Squire 5 reel lock

Great. Now my bike is REALLY INSECURE. Thanks guys.

is this not just a shank bypass not rlly decoding is it ? and i have been told thats a good way to break a decoder

Does this work on a cabinet lock with combo wheels?

Can I buy a combo lock with the cut out area for practice?

Is that a master 175? because I just made one of those with a feeler gauge and that didn't work...

After you open the lock, can you set a new combo?

Try holding the lock still so people can see what you're doing.

this is a perfect example of what my dad always said, "every lock, no matter how tough or complicated, it will always be a deterrent

Just to easy, but verry nice

would like to order the ez decoder but couldn't understand the website you mentioned. if someone understood could you please send it in comments thank you.

What watch is that you are wearing?

Doesn't the ez decoder also open up most pad locks that are not a combo lock?

Actually you can just give the lock a sharp blow with another lock or a tool of similar weight. A small hammer or screwdriver works fine. The blow causes the "paddle" to jump or rotate. Simpler but quick.

regardless of the combination ,if you hold the lock so the numbers are right side up with the code set to four zeros , pinch the shackle in then boot heal or a large stick hit the lock hard on the side which should be facing up and knock it out of your hand . if you do this correctly it will open every time without breaking the lock , and it will relock . do not use metal to hit the lock, a stick about the size of a hammer handle is perfect . works on most locks this style...

Thanks for the video. However I got dizzy trying to watch as you moved the lock around so much. It would be far better if you put the lock in a vise and point to things. Look at bosnianbill's excellent videos.

can you use a quick stick to unlock a multiwheel lock

When do we get to see the decoding part? Using a pick to open a lock is picking a lock.

It will be a lot faster and easier just to cut the lock with bolt cutter, assuming you have to search/send away and pay for this special 'tool'. Using this doesn't save the lock because you still don't have the combination. And you can't reset the combo, even if it's open, unless it's on the comb to begin with. With that said, those that made comments about the video being too long, or fidgeting, think back to grammar school doing math work. teacher wasn't satisfied with the answer, they wanted to see how you got to it. Ending, I think it would be just as and more important to us is if you gave the dimensions and thickness of the tool. It would eliminate a week or so sending away for one.

Good video

Will this work for any combination lock?

cool ..thanks ...what about a 3 roller briefcase lock,,,would that work!?

Check out Abloy locks, they're good to go. ~ Bryan

Where did you get that piece of metal?

please indicate how to obtain this tool. Could not hear what was said at end of video.

Will this work with a sesame lock as well?

Nice

This makes it easier for thieves to still other people’s stuff. If I lose the combination for my lock I’ll cut it and get another.

Does it work on luggages?

does it work the same with 3 digit lock?

....I fell asleep waiting for you to actually show us how to pick the lock!

thought this would be a good video but then he had a master lock, a toddler can crack those

- What is the thickness of the "decoder"? - Will the decoder work in any other lock, brand? - Will the decoder work next to any dial on the lock (all that needs to be done is to lift that internal locking bar)?

Sooo where can we get one of those!?

What's the difference between the EZ Decoder and the Quick Stick?