Commander X16 technical deep dive

Рет қаралды 140,381

Күн бұрын

The Commander X16 is a "modern" retro computer which promises to finally realize David Murray's goal of being the upgrade to the Commodore 64 that everyone wanted. Let's take a deep-dive look at it and see what makes it tick, and see if it's any good.
0:00 Intro
2:56 Commander X16 design and capabilities
20:46 The VERA: the heart of the X16
33:52 Check out some X16 software
52:15 Q&A about the X16
55:41 A very special surprise
58:57 Outro
--- Info
VERA = Versatile Embedded Retro Adapter
Intro music: Eternity by 4mat (Matt Simmonds)
modarchive.org/index.php?requ...
Used with permission
From Modarchive:
Matthew Simmonds, also known as 4mat or 4-Mat, is best known for his chiptunes. Most of his music is found in the form of tracked music files (modules). He began his career in the demoscene of the early ’90s, progressing to commercial games where he has worked on titles released by Konami and EA. 4-Mat’s latest work can be found on his Facebook page:
/ 4matofficial
--- Video Links
8-bit Guy Commander X16 videos:
Building my Dream Computer
Part 1: • Building my dream comp...
Part 2: • Building my Dream Comp...
The Commander X16 has finally arrived:
• The Commander X16 has ...
Commander X16 2023 update:
• Commander X16 2023 update
Commander X16 forums:
www.commanderx16.com/forum/in...
Commander X16 documentation and repos:
github.com/orgs/X16Community/...
github.com/X16Community/x16-d...
VERA programmer's reference:
github.com/X16Community/x16-d...
github.com/X16Community/vera-...
Commander X16 emulator: (click on releases to get the most recent)
github.com/X16Community/x16-e...
Adrian's 8-bit Dance Party for the Commander X16:
cx16forum.com/forum/viewtopic...
Furnace Chiptune tracker:
github.com/tildearrow/furnace
Adrian's Digital Basement Merch store:
my-store-c82bd2-2.creator-spr...
Adrian's Digital Basement ][ (Second Channel)
/ @adriansdigitalbasement2
Support the channel on Patreon:
/ adriansdigitalbasement
-- Tools
Deoxit D5:
amzn.to/2VvOKy1
store.caig.com/s.nl/it.A/id.16...
O-Ring Pick Set: (I use these to lift chips off boards)
amzn.to/3a9x54J
Elenco Electronics LP-560 Logic Probe:
amzn.to/2VrT5lW
Hakko FR301 Desoldering Iron:
amzn.to/2ye6xC0
Rigol DS1054Z Four Channel Oscilloscope:
www.rigolna.com/products/digi...
Head Worn Magnifying Goggles / Dual Lens Flip-In Head Magnifier:
amzn.to/3adRbuy
TL866II Plus Chip Tester and EPROM programmer: (The MiniPro)
amzn.to/2wG4tlP
www.aliexpress.com/item/33000...
TS100 Soldering Iron:
amzn.to/2K36dJ5
www.ebay.com/itm/TS100-65W-MI...
EEVBlog 121GW Multimeter:
www.eevblog.com/product/121gw/
DSLogic Basic Logic Analyzer:
amzn.to/2RDSDQw
www.ebay.com/itm/USB-Logic-DS...
Magnetic Screw Holder:
amzn.to/3b8LOhG
www.harborfreight.com/4-inch-...
Universal ZIP sockets: (clones, used on my ZIF-64 test machine)
www.ebay.com/itm/14-16-18-20-...
RetroTink 2X Upconverter: (to hook up something like a C64 to HDMI)
www.retrotink.com/
Plato (Clone) Side Cutters: (order five)
www.ebay.com/itm/1-2-5-10PCS-...
Heat Sinks:
www.aliexpress.com/item/32537...
Little squeezy bottles: (available elsewhere too)
amzn.to/3b8LOOI
--- Links
My GitHub repository:
github.com/misterblack1?tab=r...
Commodore Computer Club / Vancouver, WA - Portland, OR - PDX Commodore Users Group
www.commodorecomputerclub.com/
--- Instructional videos
My video on damage-free chip removal:
• How to remove chips wi...
--- Music
Intro music and other tracks by:
Nathan Divino
@itsnathandivino

Пікірлер: 1 500

@adriansdigitalbasement Жыл бұрын

A few updates in a pinned commend: - I solved the video capture issues but only after completing the video. There is a setting in the OSSC that remedied the darkening of the video.

@tomwilson2112 Жыл бұрын

Can you tell us what you had to tweak in OSSC? I was planning on using an OSSC as well, and I'd love to skip the "trial and error" phase. Also, I'm not very happy with my specific OSSC box. I'm not sure if it's a hardware problem, but I have noticed (with other sources) the left side of high-contrast images get a blurry edge on the left side, with the luminance getting darker to the right. I definitely do NOT see this problem on a VGA monitor. I'm hoping it's not a problem endemic to the OSSC overall.

@KenjiUmino Жыл бұрын

@@tomwilson2112 I have not noticed such a thing on my OSSC yet ... can you tell me any particular systems & games where this behavior is more prononunced so I can check on my unit ?

@dieSpinnt Жыл бұрын

Thank you for this in-detail tour and portfolio of this well designed 8-bit platform, Adrian. And please let us not be ashamed to honor your important role as one of the "fixer" guys for the Commander X16 mobsters community ... :P :) (meaning: based on your important design and usability feedback and your expertise with home computer electronics.) So thank you for the latter and the video!:) Now to my opinion to a sidenote, something unimportant: I think the Through Hole Technology approach gives this design a very appealing character. Watering this down to CHEAPNESS and SMD would be a sacrilege. But that is only my opinion. Of course this design has also to be available for a reasonable price ... so fighting reality with my opinion of "the art and love of old-scool'ness" isn't an option. Also having two (or more) designs is putting pressure onto the hardware designers and their lives (poor Kevin!). Well, its complicated, as this is (hopefully, hehehe) not the road to commercial success, but for old farts (with due respect) to show the younger generations how they could get reasonable (as in "reasoning") access to computer technology. I mean, we old farts where mostly confronted by accident back in the day with computers, some of us stayed ... learned, got in love and fell into that rabbit hole. The advantage for us (at that time ... maybe you can confirm that, Adrian?), which is pure coincidence of our birthdate, was that we as humans were still able to survey such systems in their ENTIREITY. In fact for the ECO-SYSTEM of the ATTINY "Systems-Processor" (Build tools, libraries, compiler, not even mentioning the production of the hardware, here) ... every little bit surrounding this MCU by a multi billion $ company (which gone through many hands, btw), it is too complex to print even an error free manual;) Also the optional approach, the expandability of a systems isn't a bad way to go. At least this will make me feel like back then ... dreaming about my own 1541, or amber monitor, without jealousy towards my class-mate ... Hehehe:) Thank you again for showing this off, Adrian. And the whole design folks and community around David who helped to birth this dream. Von Neumann, Zuse, Nixdorf, Ada and Chuck Peddle would be proud of you all!;)

@vornamenachname762 11 ай бұрын

❤😂 oh now we are ready for a real Moon Mission 🚀🪂😂

@PregnantSausage Жыл бұрын

Always amazed at how well this guy speaks. Even for us non-techy guys he makes this stuff very interesting.

@0326Hambone Жыл бұрын

Right!? The way he describes stuff, the small ramblings, upbeat tone. His videos have inspired me to dive deeper in electronics repair :D

@chromosundrift Жыл бұрын

It's very interesting that through-hole off-the-shelf parts which started out as a sweet spot for DIY is continuously shifting towards luxury pricing. Cars we call vintage today were once just old and cheaper than a new car. Once they get old enough they become rare and coveted. This appears to be also true for through-hole 80s-style computers.

@JamesHalfHorse 6 ай бұрын

I made a post the other day comparing GenX's love for vintage computers to be like our parents were about classic cars or mines case model trains. I got the mustang I never got as a teen but still looking for the Amigas that were lost to time/one of my mothers cleaning sprees. I kick myself for not buying them when they were cheap on ebay before the batteries killed so many. The electronics world is changing. In my line of work station owners expect microprocessor/fpga based new stuff to be repairable like the 80s audio gear my predecessors fixed. I can do some SMD work but most of it is not even a modestly equipped engineer can fix it anymore because it's all custom baked in house stuff that can't be off the shelf replaced anymore.

@AureliusR 4 ай бұрын

There's lots of through-hole parts you can still buy brand new. And honestly, surface mount soldering is EASIER once you actually try it.

@kargaroc386 3 ай бұрын

Millennials kinda have a similar thing as well with a bit later computers (I'm pretty sure the first computer I ever used was a 68K mac), and I guess zoomers have even later computers at least for a little bit, but later zoomers and uh, nyoomers, won't have anything of value. Phones that you can't repair with spyware and macrotransactions that ruin you don't count, sorry, I will defend this hill with my life and am willing to die on it. That's sad. I guess nostalgia (that doesn't hurt you) will be forgotten as a concept. I wonder if life is worth it or if we should mercy-destroy ourselves intentionally.

@chuckthetekkie Жыл бұрын

I would actually like to see this project sold as a DIY kit that you mostly assemble yourself. I love assembling electronic devices like this. I find it fun and relaxing and you get a much better idea on how everything comes together. Of course components like FPGAs and large surface mount packages and super tiny surface mounted components would be preinstalled but all the through hole components I would solder in myself. I love doing that kind stuff. I remember years ago my dad bought me a DIY transistor radio kit from RadioShack made by RadioShack. It was lots of fun and it worked. Unfortunately, it disintegrated due to a flood as the case was made out of cardboard.

@RetroMarkyRM 11 ай бұрын

I agree. Not sure I'd be interested in a pre-built one.

@davidmckean955 10 ай бұрын

This would be a pretty tough build for David's audience I think. I don't blame him for not wanting to do kits.

@JG-nm9zk 9 ай бұрын

Dave already complains about how long it takes to box video games.

@wishusknight3009 7 ай бұрын

@@JG-nm9zk Dave complains about a lot of things.

@JG-nm9zk 7 ай бұрын

@@wishusknight3009 Why have an all through hole device that isn't a kit. Also why aren't the plans Openhardware so that if somebody did want to make it themselves they could

@quantass Жыл бұрын

@Adrian, thanks for the much needed technical breakdown. 8-bit guy does a wonderful job with his more simplistic overview but ur deeper dive is ALSO very much needed and appreciated. So thank you for this. No one else could have explained this better.

@Solinaru Жыл бұрын

The thing i love nost about the CommanderX16 is the free Community Drama DLC

@SonicBoone56 Жыл бұрын

Well deserved drama

@skvader4187 10 ай бұрын

Drama? Can someone explain?

@ecernosoft3096 8 ай бұрын

@@skvader4187ignore it, he’s one of the nay-sayers

@Walczyk 5 ай бұрын

it’s a real shame. the cases were a total scam

@Solinaru 5 ай бұрын

@@skvader4187 Best I can describe it is like people who put money down on the cyber truck and ended up that the truck costs more and doesn't meet the promises it made

@thebigdavester Жыл бұрын

I'm happy to see that you were given a board, and mentioned ON the board since you pulled the X16 project out of the fire.

@belzebub16 Жыл бұрын

57:04 The jumping head and the gummi bears, it's hillarious 😂

@erwinvandenberg1815 Жыл бұрын

Adrian, you really know how to sell (the concept of) the Commander X16 and the Vera board. You definitely renewed my interest in the project and am sure your video will boost interest in the project in general. Well done!

@spacewolfjr Жыл бұрын

I'm excited to watch your take on it as I was pretty unimpressed with David's last video on it.

@Dinnye01 Жыл бұрын

What did you expect? Did you back the project?

@cocusar Жыл бұрын

@@Dinnye01 why should you back it up to be impressed? most open source projects don't have backing and are usually something to be really impressed with. I think the issue with this product is that the core features and decisions were locked by what David wanted, which might not be what everyone wants.

@little_fluffy_clouds Ай бұрын

@@cocusaryeah, well, that’s how projects devised by one person work. You can never provide what everyone wants, it’s just impossible

@jimfixespixels 11 ай бұрын

45:18 - "Again, Ignore the darkness." - me to myself every morning.

@kronos5385 Жыл бұрын

I've been following this project from its inception. It's a noble effort but so many of their current problems were easy to foresee. When embarking on a project like this you have to decide what business you want to be in. Designing the system, writing the software, shipping the Gerber file off to Asia and getting back blank boards are all very doable and fun. But manufacturing? That's another thing all together. They have been populating these boards by hand and have been having great difficulty manufacturing even the 100 boards they need to get out to developers. When I saw they bought a wave soldering machine to speed this up I knew they were in trouble (they're warping the boards). They thought they could get thousands of Yamaha sound chips but they were lied to and now they have to source them individually at 10 times their original price. Many of those individually sourced Yamaha chips have turned out to be fakes. There's a reason that most electronics are built in Asia. Their economy (and labor costs) are very different than in the west. Also, when big companies release a computer they contract with vendors for millions of units which gives them very good prices. There are many decisions I feel they made that were well thought out. The ATX power connector, the Nintendo controller ports, etc. But the bad decisions were the difficult to obtain chips (Yamaha) but mostly the decision to incorporate the Vera plug in module which is very versatile but FPGA based board which defeats the purpose of an 80's retro machine. Why not make the whole thing based on a better FPGA (like the Mister). A project in development overseas is the R800, an FPGA based Atari 800 from a company called Revive Machines which right now is vaporware. But if it becomes real, I'm very interested. Depends how expensive it ends up being. I hope that the X16 is a success but the odds are against them. They have a scaled down version in development without expansion slots and they may have a big company that has expressed interest in manufacturing it. They call it the game system. They haven't said who that big company is. Just FYI, the current big version of the X16 is at least $500 and is referred to as the development system. I don't mean to be negative about this as it is obviously a labor of love but the days of a couple guys designing a computer system in their garage are long gone. Apple did it almost 50 years ago but even back then they needed an Angel Investor (Mike Markkula) to invest a small fortune to make it happen ($250,000 line of credit and about $90,000 of his own money, more than a million dollars in today's money). He also negotiated a 26% ownership of Apple. Mike is a billionaire today. Sorry this post is so long.

@metaleggman18 Жыл бұрын

Only difference between them and apple is that the X16 isn't meant to beat any sort of competition or revolutionize anything. It's just a fun community project made by people interested in the hobby. While David is a bit over his head...which, well, we all kind of know that about him at this point, he is still capable of getting stuff done, as are the people he's working with. Given that they've even gotten this far is a good sign. Also, while I get people are frustrated by the FPGA for video, it seems like people are beating a dead horse at this point. Even they didn't want it to be an FPGA. And since you mentioned the MiSter, for all we know someone will release a core for it down the line. The system already has a complete emulator available.

@901aerol Жыл бұрын

The SNES controller ports were stupid too. But agreed, when you start adding fpga, you've lost the entire goal of the project.

@kronos5385 Жыл бұрын

David's reasons for choosing the Nintendo ports were that they were easily available in quantity, cheap and easy to interface with. Many viewers would have preferred Genesis ports but I can understand his thinking on this. Another smart decision was to make the MB standard ATX size so it could fit in almost any standard case.

@elideaver 11 ай бұрын

Dip logic is a major selling point of this machine: if you want to shove the whole thing into an FPGA, then you could just use the emulator and be done with it; the vera board is analogous to a custom video chip in the olden days. You make a comparison with early apple, but, uh, technology moves forward?? the chips are dirt cheap, PCBs are dirt cheap, and they do have a significant amount of capital. Not a remotely reasonable comparison.

@little_fluffy_clouds Ай бұрын

@@901aerol Many successful implementations of modern 8-bit computers have an FPGA in it. Look at ZX Spectrum Next and Mega65 as cases in point. Just incorporating an FPGA doesn’t invalidate the purpose of the system

@gushiperson Жыл бұрын

Okay, the music intro and then lead in to your own theme was awesome.

@josephroth3982 4 ай бұрын

I just pre-ordered one of the next batch...

@bcostin Жыл бұрын

Speaking as a grizzled veteran of many 1980s flamewars, it's clear that the Commander X16 and its competitors have succeeded in recapturing the spirit of 8-bit computing. I'm enjoying it - fights about the obvious superiority of your favorite system have always been part of the fun.

@OzRetrocomp Жыл бұрын

Or it could mean that a lot us in our 40s and 50s haven't really grown up since school. 😂

@mopspear Жыл бұрын

@@OzRetrocomp I'm going with this opinion.

@nickwallette6201 Жыл бұрын

@@mopspear Yep. Never underestimate the eagerness of a bunch of people to pick a trivial attribute, tie their identity to it, and rally around it like their lives depend on it.

@justinbollaert2253 Жыл бұрын

@@OzRetrocompyes my friend you hit the nail on the head. 😂

@richard.20000 Жыл бұрын

I never understood the 8-bit flamewars to be honest. Maybe because me and my friends with 8-bit computers realized there are already 16-bit Amiga 1000, Macintosh and 32-bit PC-AT and their graphic and sound were so much better. So any 8-bit flamewars was pointless for everyone who realized that any 8-bit was already dead at that time. 8-bit was just affordable fist step into home computing. However in any society there is always some percentage of primitives who enjoys such tribal habits as flamewars.

@SquallSf Жыл бұрын

Excellent video - very detailed and informative, with enough details for specialist and fast skip for enthusiast. Thank you very much @Adrian!

@slithymatt Жыл бұрын

Thanks for this great video, Adrian! And for all your help in getting the prototype working. The X16 is a very exciting project and I can't wait to see what people will do with it once they have the hardware in their hands.

@davidmiller9485 Жыл бұрын

That's really going to depend on how much. I'm disabled and would love to have this since my C64 and 128 are now gone but i can only afford so much.

@slithymatt Жыл бұрын

@@davidmiller9485 the early units will be more expensive, but the cost is going to go down a lot for future production runs and generations

@talon12020 Жыл бұрын

@@slithymatt As if there will be any future production runs. The market for this thing mostly exists as backers of the Kickstarter.

@another3997 Жыл бұрын

@@talon12020 As sceptical asxI am, I think there is enough interest for another revision. I'd be surprised if there wasn't at least a full FPGA version released, as that's probably the only way to make it truly affordable. Or perhaps a really pared down version for those that want one, but didn't like the idea of crowdfunding it. But the Agon Light is still the fly in the ointment.

@KennethScharf Жыл бұрын

Dave has said that the availability of the sound chip has become an issue. Seems most of the ones from Chinese suppliers are COUNTERFEIT.

@bzuidgeest Жыл бұрын

And anyone with any experience would know that. It's why he was advised to use FPGA clones when he started. But he would not listen.

@jonasthemovie Жыл бұрын

@@bzuidgeest So, on one side you have people salty about the FPGA graphics chip, and on the other side you have people salty about not using FPGA.

@bzuidgeest Жыл бұрын

@@jonasthemovie very much so🤣.

@kaitlyn__L Жыл бұрын

@@bzuidgeest I wonder if the graphics chip at least has enough oomph left in it to run the FM sound as well

@stardustdragon0842 Жыл бұрын

@@jonasthemovie Yeah for real people trying to have it both ways lol

@ChairmanMeow1 Ай бұрын

You should have been a college professor, Adrian. The way you explain detailed topics in an understandable way is top-notch.

@dank1837 Жыл бұрын

You’re NOT just another guy. Man you know sooooo much. Ty!

@nobuckle40 Жыл бұрын

Very, very cool! Thanks for the overview.

@The_Haze Жыл бұрын

I can't wait to see how this computer progresses.

@zizlog_sound 9 ай бұрын

I don’t think it will because tech is already available. It’s not like in the beginning of the computer era where tech developed.

@belzebub16 Жыл бұрын

Now that was an extensive review and thanks for answering the questions 👍

@macgoryeo Жыл бұрын

thank you very much Adrian for this exploration into the commander x16! Looking forward for the final product and if they ship to europe, too 🙂

@rigues Жыл бұрын

The Video Display Processor (VDP) used on the MSX 2 and MSX 2+ are actually off-the-shelf parts, descendants of the original TMS9918: The Yamaha V9938 and V9958. The problem with them is that, besides being old parts, they are quickly becoming VERY expensive. I bought a 9958 for my Omega MSX about 1 year ago for US$ 35, recently the same seller was asking US$ 60!

@adriansdigitalbasement Жыл бұрын

Damn! Perhaps we need a FPGA replacement, if possible.... so Omegas could still be built. I did look at those chips and they certainly seem to do a lot -- taking over a lot of functions of other circuits too. It means they have a high pin count meaning that a pretty fancy FPGA would be needed, not to mention a lot of level shifters since these FPGAs all run at something lower than 5v.

@rigues Жыл бұрын

@@adriansdigitalbasement There is a drop-in FPGA replacement for the TMS9918 (called F18A), and of course V9958 cores for the One-Chip MSX (OCM) and related systems, but AFAIK no option that could be used on a little board as a drop-in replacement for the real thing. I have no idea how hard it would be do do that, either. When I built my Omega, I bought extras of almost all parts in the hope of building one of two extra boards to sell. But with the current prices of the V9958... and there's also the issue that, as a high value chip, it is VERY common to get fakes and a pain to get refunds later.

@TheJeremyHolloway Жыл бұрын

@@rigues isn't the F18A getting expensive due to its FPGA being end-of-life? There's a KZfaq video of an enthusiast who created a PCB adapter using a cheaper and more modern FPGA and then installing it in his NABU.

@rigues Жыл бұрын

@@TheJeremyHolloway I don't know, I don't follow the project. The 9918 is easy to find and still plentiful, so I had no need to search for a replacement. Will try to find the video you talked about!

@Mueller3D Жыл бұрын

@@TheJeremyHolloway You're referring to the tn9k_f18a. It seems like a good path forward for the F18A.

@Scubagon Жыл бұрын

Ok, I loved that updated 8-bit dance party! I got a chuckle out of that. You've GOT to show that more often in your videos. At first, I had thought that perhaps it could be used occasionally as an outro (NOT always) for your videos, but then... I thought, why not consider using that as an outro for videos on the second channel? I think that would be pretty nifty.

@KenjiUmino Жыл бұрын

dunno about that updated 8 bit dance party ... I'm not feeling it ... the drums have no punch ...

@ricardog2165 11 ай бұрын

The gummy bears were a nice touch! 😆

@TonyHamlyn 11 ай бұрын

Love your dance party, great demonstration of this system, thanks Adrian.

@kencreten7308 Жыл бұрын

I became a computer user with a 486 DX2. I never went through the Commodore as a user. But this board? I might buy that. It's beautiful, and looks like a lot of fun.

@Okurka. Жыл бұрын

What you need is an emulator.

@another3997 Жыл бұрын

@@Okurka. Or a real C64 or some other retro computer. There were so many to choose from. But an emulator will give him an idea ofcwhat he missed.

@charlesjmouse Жыл бұрын

I must congratulate David and associates for all their hard work in producing this capable 'modern' retro computer. I sincerely hope they are rewarded by a lot of sales and an ongoing active community for all their efforts. While regrettably this system won't fit any use case I have, I might grab a VERA to play with if sold separately - it seems similar in concept to the Ti9918a through YM9958 which are favourites of mine in DIY projects.

@LeftoverBeefcake Жыл бұрын

I'm interested in the VERA module since that would be really cool to get interfaced to other 8 bit systems. But the rest of it, like you, I just don't have a use for it.

@InglebardGaming Жыл бұрын

Hey Adrian, fan of your channels (been subbed to your two main ones from my personal account for years). One minor semi-correction on the topic of sound... The YM2151 was typically paired with 16 or 32-bit systems - it's most often found in systems powered by a 68000 (Sega system16, x and y boards, Capcom CPS1, various Irem boards, the sharp x68000 and MANY more). Usually the CPUs in those systems run between 7 and 12 mhz. However... these systems also often include a z80 that runs between 3.5 and 4 mhz to specifically manage the sound. In some cases though, that second "sound" CPU doesn't actually do much of anything. I've been following the x16 from the very start. I think it's an interesting concept and enjoy seeing the videos on it and what it can do, but honestly it seems pretty impractical, especially from a cost standpoint. I know the goal has always been to reduce cost over time and shrink it down and I'd really be interested in it if it ever hits a price point of somewhere around $100. But I know we're a long way away from that. Anyway, thanks for all of the detailed videos on the x16, c64, apple II, amiga and everything else!

@njspencer79 Жыл бұрын

Not really that far from $100. There are FPGAs that have enough LUTs for the entire system. The VERA or the YM2151 ones are not the big. They are big enough to do the job. The reason the DIP one is getting the attention it is, has to do w/ the demand. A lot of folks said "$300-500 and it will have socketed DIPs. When can I get one?" Is that everyone? Nope. But it is plenty to justify the effort.

@petermuller608 Жыл бұрын

@@njspencer79 I agree. Personally I'm only interested in a DIP version. FPGA is so close to software emulation, that I see nothing intriguing. Thus

@brucemcfarling6594 Жыл бұрын

@@njspencer79 Also, there is a natural development path. If it can be done with the through hole parts and glue logic, it can be done in FPGA, but the reverse does not automatically work -- you can easily implement chip select logic in FPGA or a CPLD which will have to much gate delay if implemented with glue logic. So the X16 Dev Board is the hardware reference board, and the cost reduced "Surface mount ASIC" board for the X16 console and the X16 FPGA version can aim for compatibility with the Dev Board.

@njspencer79 Жыл бұрын

@@brucemcfarling6594 Yep the path being taken albeit a bit slower, is a path affords the possibility of a low cost FPGA version.

@brucemcfarling6594 Жыл бұрын

@@petermuller608 Yes, that's the thing. There are different demands out there. I can't pay an extra $150 for through hole parts, so I am waiting for the X16 console. But I want an expansion port, so the FPGA version is not for me.

@Stratotank3r Жыл бұрын

Yes 1h of Adrian showing cool stuff. But as always time flew by and 1h felt like 15min or so. Cool project!

@williamgraham2468 Жыл бұрын

Great video! Well worth the bandwidth. Makes me feel like it's 1983 again!

@jaf172 Жыл бұрын

Thanks for the detailed review. I can understand your excitement about the system. It looks great! Looking forward to seeing the production units.

@j__r0d Жыл бұрын

thank you for fighting for 240p! If I ever get my own Commander X16 I'll want to use it with my AppleColor RGB monitor that the IIgs and SNES are sharing atm!

@another3997 Жыл бұрын

Just another extra complication on top of all the other "little" complications that plague the X16. It's scope has changed so much since David's first video, nobody would recognise it. Feature creep is what gets projects like this in to so much trouble.

@tiger12506 2 ай бұрын

That SID at the end sounds really weird, like it's missing some channels. :P So used to hearing your 8-bit dance party on the C64s in your videos. Thanks for the video, it makes many things about the Commander X16 much more clear.

@robinhoo2024 Жыл бұрын

Looking forward to having it soon!

@qrplife Жыл бұрын

As someone that designs cloud computing systems all day long, I find this extremely refreshing 😂

@ForTheBirbs Жыл бұрын

8 bit dance party... oh yeah. ❤

@petermuller608 Жыл бұрын

I'm so jelly! Looking forward to enjoying this Video:)

@RealGengarTV Жыл бұрын

2:11 heh.. somebody is "excited" to get his hands on the X16 😜🔥

@TheKnobCalledTone. Жыл бұрын

🤣🤣🤣

@ProgVirus Жыл бұрын

So I loved the initial idea of the X16, but after seeing the cost creep up and movement towards FPGA, I'm starting to just not see the point. Why not just make it an open source MiSTer core at that point? The DE-10 Nano is pretty much the same cost (or cheaper) than the dedicated board... Maybe it's just me but I'm not really seeing the point anymore. Not to cast shade on the hard work that was put into it, it is a cool product, but one I'm not really interested in picking up any longer unfortunately

@tspawn35 Жыл бұрын

I agree. I never really felt like the X16 filled any kind of niche. So, I never saw the point of it in the first place.

@micvog Жыл бұрын

Agree... but different strokes for different folks I guess. I think it would have been really cool if the community could have coalesced around an inexpensive "modern" 8-bit retro device at a Raspberry Pi-like price but don't see that happening. The Agon Light seems to be the closest to what I was hoping for. Still will be interesting to see what comes from this, especially with the emulator being available.

@trevorminton6084 Жыл бұрын

I do think the price is higher than it's worth right now, but I still plan on getting one as soon as it comes out. This is a project I've been following since David's first video on it and I want to support them. If they don't make enough on the first wave, the whole thing is dead on arrival.

@jameslewis2635 Жыл бұрын

I don't know if you have been watching all the updates on this project but it has been announced that the boards like the one in this video are the Pro level ones for developers - as in people who are looking to plug in expansion cards and possibly design them. There is a cheaper version being produced for the average user so don't be too put off by the price on this particular board. Also, it is not exactly cheap geting a Mister system running as you need a couple of other expansion boards as well as the DE-10 Nano in order to run many system types.

@jamesg872 Жыл бұрын

The chip shortage seems to have not only affected the supply chain, but also I would imagine even design considerations. I keep looking to buy a Colour Maximite 2 or Mega65 and they are perpetually unavailable. But on the X16 it's sort of curious why they did use FPGA in key areas and then have a Yamaha chip that is no longer made.

@rogfusionkid 9 ай бұрын

This is such a great project, unfortunately I've lost the programming skills I once had (BBC B Basic at school & commodore 64 at home) These videos are good to watch, I really hope the trend of reviving and re-using older systems and technology continues. There's so much stuff out there waiting to be used so good luck to you all, go forth and create!

@thirstyCactus 8 ай бұрын

Great intro tune selection! 4mat is a genius

@jkeelsnc Жыл бұрын

Really cool system. The idea of using individual ic’s is neat. Many don’t like the FPGA video board but I agree with it since many monitors still have a VGA input. Some compromises were likely due to not really any other 8 bit video Chips being available anymore. The only serious mistake I think the X16 team made was selecting the ym2151 sound chip which is not available in volume. Seems like they should have just stayed with the PSG and PCM sound and call it Christmas. Still a neat project and I like that it will fit into an ATX case. I look forward to seeing a cost reduced version with less VIA’s, less RAM and only one expansion slot and also using SMD versions of the components. I wonder if a VERA cartridge could be developed for the C64?

@weepingscorpion8739 Жыл бұрын

I was myself wondering about the Vera on an ISA card and wondering if it could be made to do the various modes like CGA, the various CGA+, Tandy 1000 graphics etc. Like an all round retro graphics card.

@jkeelsnc Жыл бұрын

@@weepingscorpion8739 now that would be worthwhile especially Tandy graphics. Then one could add it to any old xt. One can already add Tandy sound to an XT.

@danielmantione Жыл бұрын

Yes, the Vera is indeed C64 compatible. Designing a cartridge should be trivial.

@danielmantione Жыл бұрын

@@weepingscorpion8739 Allthough the VERA is designed for a 6502 bus, building an ISA card with a Vera on it shouldn't be hard. Making it emulate CGA and other PC graphics cards won't work. The fact alone that it has "just" 32 registers would already prevent this.

@weepingscorpion8739 Жыл бұрын

@@danielmantione Ah! I didn't know that. That's a bummer. Thanks.

@chironpictures Жыл бұрын

Oh wow - those expansion slots have the voltages mirrored in such a way that if you plugged the card in backwards it doesn't fry your whole system - NICE!

@Throckmorton.Scribblemonger Жыл бұрын

It does fry a Famicom cartridge, though. Instead of mirroring the voltages they should have keyed the socket so it was impossible to insert a cartridge backwards.

@tomcombe4813 Жыл бұрын

@@Throckmorton.Scribblemongerthey should have chosen a different connector. The fact that they are paying more than $5 per connector is insanity. Its one of the many pieces of evidence that nobody thought about the cost of this machine when designing it.

@tangentspace Жыл бұрын

@@tomcombe4813 The RC2014 just uses pin headers for its backplane and it has more expansion cards designed for it than the X16 ever will.

@nickwallette6201 Жыл бұрын

Geez guys... Look. Connectors cost money. That's just a universal truism. When you _actually build things_ (and don't just criticize other people's projects), you start to realize that a surprisingly large chunk of your product cost is "stuff" that isn't what you would think is the most vital. Connectors are definitely one of those things. Even pin headers aren't cheap. Especially if you need both male and female connectors. At least in this case, the sockets cost a bit of money, but making cards is basically free -- it's just edge connectors designed into the PCB. That, IMO, is a solid compromise. Edge connectors are probably also more robust than pin headers. It's a tried-and-true design. And yeah, it's not electrically benign with every card you can make fit into the slot. _Oh... well..._ Most things aren't. This isn't meant for mindless toddlers to go shoving retro carts into. It sidesteps what will most likely be the most common error, and that's already more generous than many bus connectors. Keying the connector would be great, but if you think you're paying too much for a commodity connector already, just wait until you see how much it costs to have the manufacturer create custom versions for you ... at least in the small production runs this thing will see. In summary... it's a DEV BOARD, for enthusiasts, to prove a design and test the waters to see whether it makes sense to continue cost-optimizing the design. I would say most of their choices were pretty reasonable in that regard. I question the use of the Yamaha chip here, but otherwise, it seems fairly well thought-out. Better than most people would do in their situation, at least.

@lilmul123 Жыл бұрын

@@nickwallette6201 In the beginning, they were supposed to be using no FPGAs and only non-obsolete chips. The X16 has both! If they were going to use FPGAs anyway, they should have just made the whole design FPGA-based. It's also a nightmare to assemble, and is far from affordable. It was *very* poorly thought out.

@EmielRoumen 10 ай бұрын

Cracking dance party, besides the very clear breakdown of the board and components 🎉

@TheUtuber999 Жыл бұрын

I'm so glad they fixed the mouse pointer being hidden in R43. Looking good!

@chaoticsystem2211 Жыл бұрын

If they think vga output is ancient, wait until they discover the cpu :D

@michaelblair5566 Жыл бұрын

The CPU came out in 1975...

@Okurka. Жыл бұрын

@@michaelblair5566 The 65C02 came out in 1983...

@lsorense Жыл бұрын

@@Okurka. Well technically yes the 65C02 is 1983 but the 6502 was 1975.

@kargaroc386 Жыл бұрын

@@Okurka. and its just as capable as the 1975 6502. 1976 if you discount the ROR instruction.

@PaulsComputerEmp Жыл бұрын

As someone who has been eagerly following news about the Commander X16, a retro-inspired computer, I have witnessed the great interest it has generated among retro computing enthusiasts. However, recent cost discussions on the 8-Bit Guy's channel have given me pause, making me realize that owning one might be beyond my reach. This realization has led me to reflect on the niche market for the X16. While it offers authenticity, learning opportunities, and a vibrant community, its price point may restrict ownership to a passionate subset of retro computing enthusiasts. Considering alternatives like emulation on existing hardware might be a more accessible and cost-effective way to experience 8-bit computing.

@njspencer79 Жыл бұрын

A lot has changed since that video. The have an assembly house in DFW area. The first batch has been assembled. Just population of DIP and testing. Cost of the 2nd run should be $350 including board, PS, mouse and keyboard. David mentions down in the comments.

@doc_sav Жыл бұрын

@@njspencer79 I'll believe it when I see the receipts. That also doesn't address that fact that $60,000 of the startup costs were "donations", not crowdfunding, not pre-orders, literal monetary gifts. This is a for-profit business, and that money was used to buy fabrication and assembly equipment for Tex-elec, not getting boards built, so that is utterly unethical and I'm not even sure if it is legal. So regardless of the performance or design or even the horrendous cost, this project is so tainted by the absolute disregard for anyone but the X16 cabal that I wouldn't buy it even if I never had to buy another piece of retro hardware again. If he refunds all of those donations... Well, *I* still wouldn't buy it, but at least he wouldn't be a freaking crook.

@njspencer79 Жыл бұрын

@@doc_sav I have seen videos of them coming off the line. Are you arguing that is fake? Why would this video address any of that? it is a technical review nothing more. As for accusing 8bg of being a crook. Wow. Do you think it is wise to post such statements online? Let me guess we should all get an AgonLight right?

@doc_sav Жыл бұрын

@@njspencer79 I have not doubt they are being made. I doubt the price point until units go on sale. I have not made any statement that doesn't come from 8bitguy's own videos, so I have absolutely no compunctions about being critical about them here or in any other format. As to the AgonLight, I already said specifically I am not even talking about the design or performance of the device itself here, just the business practices, so it is completely irrelevant to the discussion at hand.

@brucemcfarling6594 Жыл бұрын

@@doc_sav But in any event, the Dev Board will never be as cheap as the same system using SMB versions of most of the chips and integrating the Vera circuit onto the motherboard. The X16 console targeting the $150-$200 price point seems like the one you should be looking at.

@todorpetrov3737 10 ай бұрын

This video was pure joy!

@soulshinobi 9 ай бұрын

I have no idea what this is, or what it does, but it's neat watching you explain it.

@novh4ck Жыл бұрын

Just to add more context. Tehtris is a game written in Prog8 language. That's a specialised language which compiles to 6502 assembly (it supports C64 too) by a member of the community DesertFish.

@stevedonkers9087 Жыл бұрын

I've built a few WDC65C02S based computers. When you push the clock speed the components you use have to be able to deal with it. Those SRAM chips have a 55ns access time which is pretty slow for a 10MHz clock.. along with all of the latency introduced with the RAM select (and other logic) propagation delays.

@deterdamel7380 Жыл бұрын

Yes, if you decide to use SRAM-chips in 600mil-DIP, you get slow and crappy SRAM. Seems to be a design goal. But the CX16 is soo great.. !?

@brucemcfarling6594 Жыл бұрын

Hence the 8MHz system clock on the Dev Board.

@another3997 Жыл бұрын

@@deterdamel7380 Yeah, why not add modern, super fast DIMMs? Why not add an Nvidia RTX GPU too? And make it multi-core, each with FPU and 2MB cache per core. Oh wait... it's supposed to be an 8 bit 6502 based, retro computer. Speed is not the primary goal. 🙄

@deterdamel7380 Жыл бұрын

@@another3997 No need to reply, if you don't know what SRAM is.

@deterdamel7380 Жыл бұрын

@@brucemcfarling6594 Yes, 8MHz, due to the selected fantom-soundchip.

@Taadizzle Жыл бұрын

Hi @Adrian'sDigitalBasement, great episode! I thoroughly enjoyed this one, especially your enthusiastic 8bit dancing at the end. :) I seem to recall you mentioning in a previous episode you were born in 1975, is this correct?

@twocvbloke Жыл бұрын

Every time I hear "VERA", I think of the "Video Electronic Recording Apparatus", an early form of video recorder system that was used by the BBC that used razor-sharp thin metal "tape" at high speed (pre-dated spinning head VTRs by a few years), and produced quite a wobbly picture, and if the tape went wrong and came off the reels, it was apparently quite lethal, it was featured in a section of "The Secret Life of Machines" on the video recorder... :)

@shanehebert396 Жыл бұрын

I think of Jayne's rifle. ;)

@kargaroc386 Жыл бұрын

Surprised they never tried using a wire - you could get a whole lot more thin wire onto a spool than a wide strip of tape.

@twocvbloke Жыл бұрын

@@kargaroc386 Presumably the speed at which the metal tape was running would have been too much for wire to handle, given even audio recorders that used wire would snap too, something the size of the VERA unit would have been even more lethal if they had wire whipping about everywhere like cheesewire... :S

@dans.8198 Жыл бұрын

Very interesting project, but it seems a solution in search of a problem. If you want authentic 80’s vibes, there are a lot of lovely Commodore and Atari machines out in the cold who would love to be saved and adopted. I really appreciate Adrian restoring and preserving computer history.

@bzuidgeest Жыл бұрын

And a lot of modern solutions to make using them easier.

@Wavicle Жыл бұрын

I think David mentioned this in one of his videos, but the problem with the old computers is the steep learning curve they have to being able to use them effectively. The X16 has a much simplified hardware programming model (similar to, but not copied from, the VIC-20). E.g. pixel addresses in a framebuffer can be trivially calculated on X16 and don't have to be in a weird pseudo-tile mode like C64. As many people writing X16 software have said - programming on the X16 is "fun".

@easymodegamer501 Жыл бұрын

@@Wavicle in addition, it’s a good entry point if you don’t have experience fixing older computers since it’s difficult to find reasonably priced working older computers.

@maxxdahl6062 Жыл бұрын

@@Wavicle Going to be even more of a steep learning curve on a machine with no support.

@RealGengarTV Жыл бұрын

No Atari's or Commodore's that's in economic range here in northern Scandinavia

@JoeCdaYT Жыл бұрын

I think the new 8BDP should become an intro or outro for certain videos. It would be interesting to see it every so often. Glad to see more on the Commander X16.

@JustWasted3HoursHere Жыл бұрын

Hardware limits are what gave those old retro computers their unique "personalities". The varied ways that different manufacturers used to make the best of limited RAM, clock speed and functionality made each system a treasure trove for programmers to explore and take advantage of, unlike modern systems that all have the same capabilities and therefore all seem the same with no individual personalities. I look forward to a future version of the Commander X16 that heavily utilizes FPGA to vastly simplify and cost-reduce the overall design (and future-proof the motherboard because it would not rely on being able to source parts that are not made anymore). It would also mean that tweaks could be made to the functionality of the system.

@rickpontificates3406 2 ай бұрын

The YM2151 is the sound chip in most Williams pinball machines. They also used the 55536 CVSDM for speech. I personally use the YMZ705F WAV player in my stuff

@loganjorgensen 11 ай бұрын

It had some growing pains but the X16 really came together into one tight clean design, it was interesting how many fields of knowledge it took to get right as in all your work to fix the problems with the board.🙂 I adore the Vera module, such a great compromise for a lack of ideal vintage VDPs available, various AV outputs, as well as doing screen modes I wish vintage computers could do. 23:48 Thank you for being disappointed, I can't believe they left out 240p originally since that's nuts for such a platform.😉 The 480i maximum makes a lot of sense for an 8-bit computer as the era was spread between SDTV and PC monitor use and both share that common denominator of 480 scanlines. Shame about PAL but it's an awfully unique set of variables compared to NTSC in relation to modern screen specs. The color output is pretty sweet, very comparable to MSX2, SMS, CPC, and as you say nearly on par with a first generation Amiga. Same with the sound capability, very robust but also quite appropriate for the limits of an 8-bit computer, reminds me of the MSX a lot in sound expansion.

@earthsteward70 Жыл бұрын

The cartridges are more than likely going to be how expansions are handled in the future, given the plan to revise the case with cartridge slots, with the idea being that slot 1 would be for a game and slots 2 to 4 would be like for ram, co-CPUs, drivers, memory mappers and GFX cards.

@jengelenm Жыл бұрын

Great video!

@m1geo Жыл бұрын

I was about to say "out the into music back to the old one!" 😁 then yours came back! 😁

@enzofitzhume7320 Жыл бұрын

Can't wait until David comes out with the emulator!!

@adriansdigitalbasement Жыл бұрын

github.com/X16Community/x16-emulator/releases/tag/r43

@enzofitzhume7320 Жыл бұрын

Awesome! Thanks Adrian!

@nilz23 Жыл бұрын

I like the idea of it somehow (and have been following it since it started) but I can't think of a piece of electronics that I have less desire to buy/own. I don't think I'd even take one for free.

@tenmillionvolts Жыл бұрын

Nothing wrong with that. There's always the emulator. I'm a hardware man and I'm excited that there is this passion to create hardware with retro feel and repairability. Price may be an issue, but a neat homebrew like this is never going to be super cheap. If the software devs get behind it, that's what will sell it 😊

@TranscendentalAirwaves Жыл бұрын

Same lol

@TheKnobCalledTone. Жыл бұрын

Thinking of it as being a piece of 8-Bit Guy memorabilia instead of a useful computer and it makes more sense.

@lilmul123 Жыл бұрын

@@TheKnobCalledTone. Why would anyone spend $500 on something made by someone who is literally just some guy on KZfaq? I don’t understand that.

@wayland7150 Жыл бұрын

It's good that this is a proper 8/16 bit system. Most of the 8 bit machines of early '80's had terrible graphics but this is just enough better to make it right. My benchmark is can it play the arcade games of the time convincingly.

@another3997 Жыл бұрын

But this is an 8 bit machine. If you wanted better graphics, sound and performance than typical 8 bit machines... build a 16 bit machine. Machines like the Amiga, Atari ST and Sharp X68000 already exist, so something like that gives you a more contemporary experience. Theoretically, you could create an 8 bit machine with a modern GPU grafted on... but it wouldn't be any better or more fun than existing machines.

@wayland7150 Жыл бұрын

@@another3997 No, you miss the point, some 8 bit machines had excellent graphics, BBC, Atari and the arcade machines. Yes they were not as good as the 16 bit consoles had but the point is that the graphics on my Dragon 32 and those on a Sinclair Spectrum were substandard and held the machine back as much as it's lack of disk drive. Modern retro computers that solve these problems in a 1980's way get my approval. The CoCoSDC provides a 1980 style disk drive using current tech for example.

@ownpj Жыл бұрын

To clarify @ 5:02 Commodore introduced a two button joystick for compatible 8-bitters with the C64GS. And the Amiga line supports the 7 buttoned CD32 gamepad. Adrian probably just isn't aware because games tended to also be 1-button backwards compatible.

@Walczyk Жыл бұрын

I trust Adrian here, it would be cool to program in 6502 and have new old games

@Throckmorton.Scribblemonger Жыл бұрын

That's what C64 Studio is for.

@svenvandevelde1 Жыл бұрын

Exactly!

@jamesdecross1035 Жыл бұрын

Q: So, if the expansion / cartridge slot was reduced to just one as in a cost-reduced version, and set at a right-angle so cards slot in parallel to the board, does this mean something similar to a expander cartridge on the C64 could restore the ability to add more than one card?

@danielmantione Жыл бұрын

It's a parallel bus, so yes, that would work up until the length of signal traces and parasitic capacity of components starts to cause communication problems.

@tomwilson2112 Жыл бұрын

Yes. And since the expansion bus is designed from day one for 5 total I/O banks, you will have a far easier time running multiple expansion cards together. If the cards are built properly, with user selectable I/O ranges, you won't get the kinds of conflicts you do when trying to use multiple C64 expansion port devices together.

@lis6502 Жыл бұрын

14:19 one thing that i much like in these slot's design is GND separation between power lines and buses lines. yeah Apple, i am looking at you and your famous LCD connector :3

@Mike.Garcia Жыл бұрын

Commander X16 community love ❤

@petermuller608 Жыл бұрын

While using an ATTiny for keyboard, mouse and general system design is the most cost effective way of implementation, I would have loved this being a W65C134S (6502 based microcontroller)

@brucemcfarling6594 Жыл бұрын

If a version of the W65C134S with flash RAM program storage was available, it might have been a serious option, even if the ATTiny would likely be cheaper due to scale economies. At least the ATTiny is an 8bit MCU, similar to the ones used to upgrade from IBM-XT to the IBM-AT keyboards that were the direct predecessors of the PS/2 keyboards.

@petermuller608 Жыл бұрын

@@brucemcfarling6594 to me it looks like the WDC MCU has both ROM (4k) and RAM (192) on chip

@brucemcfarling6594 Жыл бұрын

@@petermuller608 Yes. If that were Flash RAM rather than a masked ROM (READ-ONLY Memory), so that new firmware could be loaded onto it, it would be a serious candidate.

@petermuller608 Жыл бұрын

@@brucemcfarling6594 oh is that really ROM as in One Time Programmable? Didn't realize, just assumed ROM as in Flash

@brucemcfarling6594 Жыл бұрын

@@petermuller608 Yes, it's ROM ... not PROM, not EPROM, not Flash "ROM". "This MCU has an embedded debug monitor ROM with a library of routines that can help you reduce development time."

@tonycosta3302 Жыл бұрын

I’d love to hear Adrian’s take on the AgonLight2 versus the Commander 16. It seems like both are trying fill the same niche but with different approaches. I could use an unbiased take of the pros/cons of each.

@bzuidgeest Жыл бұрын

Or the f256 junior.

@VincentGroenewold Жыл бұрын

Unbiased may be a little thing as Adrian is printed on the board of the X16. :)

@Okurka. Жыл бұрын

One costs $50 and the other $500. One is available at multiple places, the other isn't.

@kwanchan6745 Жыл бұрын

@@VincentGroenewold remember, some youtubers produce content for the likes/ego, others produce to monetize pushing a $600 8-bit computer tells me which side of the monetization certain channels are heading

@hjalfi Жыл бұрын

I think they're both a bit disappointing --- both systems essentially have the 8-bit processor as a peripheral to a vastly more powerful modern CPU which does all the heavy lifting. I can see the necessity, as nobody makes ordinary video chipsets any more, but having the video chipset being capable of _emulating_ the primary CPU, faster than the CPU, somehow takes all the fun out of using an 8-bit CPU.

@Megabobster Жыл бұрын

it's been a little while since i used my mister, is there an x16 core available for it? seems like the perfect platform for it and i'd love to play around with it some

@claegason2521 Жыл бұрын

There’s a software emulator for it but no FPGA core

@thethufir 7 ай бұрын

57:49 Adrians Digital Danceparty... I had a hard time not laughing :D

@IanSlothieRolfe Жыл бұрын

Not supporting PAL is a bit of a surprise considering that most of the world uses PAL or some compatible derivative, but I would imagine most people would be using the VGA port anyway so its not a deal breaker. Perhaps this would be something addressed in the future, I get that most of the development of this has been for/in the USA. Also many TVs that support NTSC and PAL are available here in Europe.

@Throckmorton.Scribblemonger Жыл бұрын

But the entire world revolves around 'Merica.

@rkurbatov Жыл бұрын

@@Throckmorton.Scribblemonger I would gladly buy the retro PC built after some 40-years old PC from your country. Are there many options? No? How so?

@Throckmorton.Scribblemonger Жыл бұрын

@@rkurbatov You mean the AgonLight? Shouldn't you be fighting for your country instead of defending the US? Or are you one of those deserters?

@nickwallette6201 Жыл бұрын

@@Throckmorton.Scribblemonger No, and I doubt the designers of this particular project are limiting their decisions just to what existed within the US. Rather.. 1) NTSC is not just US. It's a widely-deployed standard. Let's relax on the nationalism a little bit. 2) It's also very easy to downgrade from the world-wide VGA standard to NTSC -- just interlace it. Same resolution, same frame rate. 50Hz would require choosing VGA or video output, and that makes no sense at all. 3) PAL was widely deployed, but it was deployed in a lot of different and partially incompatible ways. 4) As mentioned above, many PAL TVs supported NTSC. Not so much the other way around. "Why" doesn't matter, nothing is going to retroactively modify a plethora of vintage TVs and monitors. So, it makes a ton of sense to NOT fragment the software market into stupid 50/60Hz versions with slightly different resolution. Pick one and stick with it. It's not that I'm set on the superiority of NTSC (it had its issues, clearly), but given #2 and #4, it makes the most sense if you had to choose one or the other.

@Throckmorton.Scribblemonger Жыл бұрын

@@nickwallette6201 Never Twice the Same Color

@cbmeeks Жыл бұрын

I admit...I didn't really want one. But now I do. Thanks for helping me spend my money on more retro gear. LOL

@wcg66 2 ай бұрын

Adrian, you have done the best job of selling me on the X16, no offence to 8 bit guy and team!

@TheSeper Жыл бұрын

So that dance party bit should totally be the new channel intro hahaha

@Longlius Жыл бұрын

The 65C02 combined with the PSG synth and the extremely powerful graphics of the VERA reminds me a lot of the PC Engine/Turbografx 16

@WillSams Жыл бұрын

Yeap, this seems like a SuperGrafx on extreme steroids. I just discovered this Commander X16 project today and I'm very, very excited.

@tangentspace Жыл бұрын

There is no PSG present on the X16

@Longlius Жыл бұрын

@@tangentspace There is a PSG on the VERA

@slaapliedje Жыл бұрын

Amigas (at least AGA ones) support many more buttons on a controller (like the CD32 controller). Unfortunately very few games are coded to take advantage of it... also unfortunately, the CD32 controller is rather 'meh'.

@TheJeremyHolloway Жыл бұрын

Kinda like how criminally unsupported the Enhanced Joystick Ports were on the Atari STe. The Jaguar's JagPads - originally called the "ST Power Pads" - debuted for the STe first. Very few games supported them and mainly found some support on later Atari Falcon030 specific titles [still before the Jaguar's release].

@slaapliedje Жыл бұрын

@@TheJeremyHolloway Yeah, seems only the Atari made games ever utilized the Power Pad. I own one because they're cool, and look great on my Falcon / 1040STe.

@Waccoon Жыл бұрын

What's really sad is that the stock Amiga joystick ports fully support 3 fire buttons... but back in the day every joystick vendor just cranked out "2600 compatible" controllers, so we poor Amiga saps still only got one fire button. It's extremely rare for any game to support more than one button, let alone the analog inputs.

@slaapliedje Жыл бұрын

@@Waccoon yeah, even the Atari 8bit computers were capable of more. For some weird reason home systems didn't really start getting more buttons until the NES / SMS / 7800 era. Classic chicken / egg thing, why develop for multi button controllers when no one was making multi button joysticks? Granted most arcade games had more than one button. I have always suspected there was some form of trying to prevent kids from just staying home and playing the games if they were as good as the arcade...

@joehigashi6261 9 ай бұрын

@@slaapliedje Just to be complete, I must point out that the Intellivision and ColecoVision had more than one button. Those consoles were before the NES/SMS generation.

@kencreten7308 Жыл бұрын

Nice intro, Sir!

@LaneDenson Жыл бұрын

That intro music is the jam...

@TheJeremyHolloway Жыл бұрын

That's kinda weird to use the Commander X16's PSG on the ported version of the NES Marble Madness [originally done by Tengen, aka the Atari Games Corp] on the Commander X16 when the original arcade version of [Atari Games Corp's] Marble Madness used a YM2151 for its audio. The same sound chip inside the Commander X16. Seems like it would've been better just to lift the arcade YM2151 audio code and patch the ported NES version to use that very same audio chip.

@PregnantSausage Жыл бұрын

Agreed. I gottsa fig the porter just wasnt aware.

@Wavicle Жыл бұрын

I think the audio capture was a little off, but something similar to that exact thing was done. It's a little memory expensive because it is playing back processed vgmrips which aren't exactly compact.

@nylint Жыл бұрын

i won't watch david's stuff - you're aware that many youtube viewers don't like him at all - but i'm glad to watch you review retro stuff. everyone likes adrian!

@rastislavzima Жыл бұрын

I have finished with David videos as well due to 1. His hardware incompetence (he should have stayed with software development this is a field he is good at), 2. Due to his altitude toward carrying guns in public. But I'll watch the Adrians videos about anything because he is just the opposite of David in both aspects. And he is funny too. 🙂

@kaitlyn__L Жыл бұрын

@@rastislavzima I do still watch some of the things, mostly software development or company history stuff, but I do always think of that video. Especially the “we’re not threatening anyone!” part filmed in (a) public business(es), when it _is_ a defacto threat. Which is the whole point: “don’t mess with me”. I’m thinking he meant “I’m not _presently planning to use it”,_ but those of course are rather different things. Especially when it’s ready to go on someone’s back or shoulder, rather than safely and securely holstered.

@eadweard. Жыл бұрын

@@kaitlyn__L I had been unaware that the person in question (I won't use his name as I don't want to revictimize anyone reading) had been engaging in these ideologically-troubling activities - and thank you for bringing them to my attention.

@jonasthemovie Жыл бұрын

@@rastislavzima You prefer criminals to be the only civilians to carry weapons?

@kaitlyn__L Жыл бұрын

@@eadweard. I mean, I wouldn’t go as far as to say names like “gun nut” or anything. He’s just a locally-centre-ground Texas open-carry advocate, yk? I’m mostly annoyed by those common arguments which conflate different things, to the point of denying that the goal is to make people (in general) more fearful of the carrier. Or focusing more on abstract rights rather than what they substantively enable. And full cards on the table my position is one of strict licensing with secure storage requirements. I grew up doing martial arts, I understand the desire for genuine self defence. But unlicensed open-carry guys take it way too far in my opinion, with increasingly stretched reasoning to justify excessive capabilities and making a big public display of it. That’s probably because martial arts drilled into me to use the minimum necessary response to get out of a situation. Which is even more of an argument for training and licensing!

@MichaelBLive Жыл бұрын

Oh man. I really want one!

@arpz Жыл бұрын

Awesome intro mod from 4mat 😍 (frameskool by equinox)

@tmbarral664 Жыл бұрын

Adria, I know you're more a fixer than a builder but it would be absolutely fantastic to have a video of you creating an adapter for the vera for the apple // (or vic20) ! Will you pick up the gauntlet ? ;oD

@aw34565 Жыл бұрын

One thing that would be very interesting would be to take the VERA board and couple it with a Raspberry Pi PICO microcontroller. A common request from the community is the ability to program the 6502 using modern languages such as 'C' or Python which is very difficult on a venerable CPU. Having an RPi PICO to control the VERA would make the system more accessible to these without experience in programming 6502 assembly which, I at least, find quite different from programing in modern languages.

@kargaroc386 Жыл бұрын

Yeah to a modern programmer, the 6502 may as well be the Ancient Latin of CPUs. (its counter part the Z80/8080 is more like proto-germanic - both would evolve into what is used today, x86-64 and modern english respectively)

@logannosleep5 Жыл бұрын

Look up Rumbledethumps 6502 pico computer project, if you haven’t. That might be more up your alley…. Also might be able to modify it into what you’re looking for….

@kargaroc386 Жыл бұрын

The intro to this video, with shots of the board and music and not a single spoken word, immediately and quietly followed by the intro, was interesting. I'm so used to hearing your voice speak before the intro!

@fernandlehners7787 Жыл бұрын

got a question about these 80x25 text resolution that needs to be squashed. As the Commodore 128 also had a resolution of 640x200, and text mode of 80x25 , did the C128 also squash that text resolution ?

@danielmantione Жыл бұрын

Not needed: The professional RGBI monitors that the C128 80 column mode did use have picture size controls. It is mainly televisions that use overscan and depend on borders.

@fernandlehners7787 Жыл бұрын

@@danielmantione my question is about the VGA connector on the X16 connected to a LCD monitor, not the televisions

@danielmantione Жыл бұрын

@@fernandlehners7787 Inj that case, no squashing is needed on the CX16 and the C128, designed for professional CRTs, still hadn't any need either.

@retrig202 Жыл бұрын

The Commander X16 and the Mega65 are the 2 most exciting computers I'm looking forward to. Maybe the Spectrum Next as well, but I don't have the nostalgia for that platform other than my first computer being a Timex Sinclair 1000 . I really want to get my hands on one of these. Fantastic video, Adrian! Thank you!

@richy69ify Жыл бұрын

also check out the AgonLight2

@joehigashi6261 10 ай бұрын

@@richy69ify He can't get excited over a demo board! 😆 Also, he already told you he has no nostalgia for a Z80 project.

@aviphysics Жыл бұрын

As I get more and more into electronics, working with surface mount has become a necessity, though hasn't been too bad after I got a heat gun. I still haven't mastered BGA though.

@adriansdigitalbasement Жыл бұрын

Indeed -- I still do prefer to stick with through hole, but that's mainly because I like using stuff from the 70s and 80s :-)

@deano72 Жыл бұрын

A weekend treat♥️

@benanderson89 3 ай бұрын

A good chunk of ICs being condensed down to an FPGA would still be very appropriate for the era this thing was (originally) going for. Sinclair machines used a ULA manufactured by Ferranti, for example.

@interactii Жыл бұрын

While I appreciate the extraordinary amount of passion that has gone into this system, I have never been able to get excited about it. From the beginning, I didn't like that the video solution used an FPGA, and I don't like that it has an ATTINY either. Either its retro or its not, and this is just not quite retro enough for me to get excited. The other problem is its been talking to long. I totally understand its a hobby project done in people's free time, but it's been years. I think to those who have been fully engaged in the project, its amazingly exciting, but I think for most people on the outside this isn't that interesting.

@bzuidgeest Жыл бұрын

There are no other options other than FPGA for video. Every board out there, uses an FPGA for video. Nothing like the vintage video chips of old is produced these days. And you can't connect those old chips to a modern display . If you want any kind of large user group you have no other choice.

@jonasthemovie Жыл бұрын

So, how would you have solved HDMI support?

@happycube Жыл бұрын

@@bzuidgeest Now the RP2040 can do it, but that wasn't an option while this was being designed. (you could probably use another RP2040 with level conversion to act as a 6502...)

@jakejoyride 7 ай бұрын

I think I will go with Agon Light

@Walczyk 5 ай бұрын

good choice

@GarthBeagle Жыл бұрын

Love the X16 8 bit dance party!

@SC-CAJUN Жыл бұрын

Oh man! 8 Bit Dance Party has moved into the early 90s Frasier Crane Video Toaster era! Wow!

@Flashy7 Жыл бұрын

That flexible RAM/ROM mapping is very nice. The C64 would have been almost this great if they designed in a way that the cartridge port had the signals for mapping writable RAM into those 8/16K partitions (and the IO for sending mapping commands to the cartridge).

@Curt_Sampson Жыл бұрын

The C64 _does_ have those signals. • `R/W̅` is on pin 5 of the cartridge slot, which solves your "writable RAM" problem. _Anything_ in the cart can tell if the computer's trying to read or write it, and respond appropriately. • There are two specific address ranges, $DE00 and $DF00, with their own decode pins on the cartridge port, `I̅O̅1` and `I̅O̅2`. So that makes it dead easy to have something interpreting commands there. But that's just for ease of use and as a convention; the cartridge port sees _all_ writes the CPU does (except for addresses $00 and $01), so you can pretty much use any address you like to receive commands. • There are various modes for what the cart can take over (i.e., be guaranteed that internal devices will avoid responding to), but the broadest one is by asserting the `G̅A̅M̅E̅ ` line which maps 4K of C64 internal RAM to the bottom 4K of memory, and leaves _everything_ else to the cart.

@Flashy7 Жыл бұрын

I did not know that (or I knew it wrong!). So I can put a large SRAM on a cartridge and with some decoding logic I can choose which chunk I want to see in the 64k somewhere? Then why do we need the DMA-style ram expansion if we can just swap 8k pages in "zero" time?

@Curt_Sampson Жыл бұрын

@@Flashy7 I see two fairly large benefits to the REU way of doing things: 1. You can transfer arbitrary-sized units of memory from 1 to 64 KB, rather than being stuck with fixed page boundaries. So if you wanted to, say, transfer just one frame buffer worth of data (as is done by the "Globe" demo), you don't need to swap out a bunch of other data. This is particularly important when working near small areas of important stuff. For example, if your page size is 8 KB and you want to use different memory anywhere under address $2000, a bank switching system would also be switching out your zero page and stack which is almost invariably not what you'd want. 2. The REU leaves all existing address mapping working as it did before, so programs that depend on it need minimal modification, and programs unaware of it have a minimal chance of being broken by it, even if other things in memory (e.g. a TSR program) are simultaneously using it.

@svenvandevelde1 Жыл бұрын

Yes. It is truly amazing. Also note that the CX16 has TWO banking areas for RAM. Between A000 and BFFF and between C000 and FFFF. When the memory expansion card is installed it can be loaded with extra RAM chips in the C000 and FFFF address space!!!!

@Curt_Sampson Жыл бұрын

@@svenvandevelde1 You can do roughly same on the C64, which has independent mappings for the following: • $E000-$FFFF: internal RAM, KERNAL ROM or cartridge (ROMH line) • $D000-$DFFF: internal RAM, CHAROM, or I/O+colour RAM • $C000-$CFFF: internal RAM or cartridge (requires decoding on cartridge) • $A000-$BFFF: internal RAM, BASIC ROM or cartridge (ROMH ine) • $8000-$AFFF: internal RAM or cartridge (ROML line) • $1000-$7FFF: internal RAM or cartridge (requires decoding on cartridge) And of course the C128 has even more powerful mappings.