I have been a HVAC/R Technician for over 31 years, most of it has been in the commercial and industrial end of the field. I definitely would take commercial any day over residential. I enjoy being a HVAC/R Technician.

Just switched from residential to commercial and wish I did it sooner. I love the commercial work over residential.

Great job the only thing I would recommend is to never trust the factory settings of the blower alignment. Always verify.

This is the first video I found of yours. I love the detail you go into. I’ve been Doing plumbing and heating for 20 years and just last year got my EPA card and started an AC apprenticeship. So videos like these are a big help. Appreciate what you do you got a new subscriber.

Just started watching your vids. I was skeptical at first but now I see you know what your doing. Enjoy the videos and the more uploads the better

I love the added wind noise for the finger points 💨 haha good job man

Dude! Your channel is great! I'm getting back in the trade after being out for a while (12-13 years). Having to brush up on my knowledge and your channel is helping me greatly! Keep it up!

I’ve been watching these videos religiously. I start Electro mechanical technology for HVAC-R next month. They give me motivation! Thank you for all you do!

Commercial work is definitely preferred over residential. I must add that the quality of your videos is excellent. Good explanations on the equipment your servicing. This is how HVAC-R videos should be made. Excellent work sir!

I learn a hell of a lot from these videos wish guys at my company could explain things like you do and your attitude about the job is amazing something I don’t see in the people i work with

Once again you provided another great video.Your attention to detail is obvious and will only grow your business. I really like those Trane RTU I have accounts that have those on their buildings and they are sturdy and bullet proof units. One suggestion I would give you- I know today, now, your knees feel perfect and no problem, But I would highly suggest to you, use knee pads, don't wait until your knees start acting up to think about it. Do it now and years from now you will be so glad you did. On all my service calls, its routine with me, first things I grab to head in the house or building, is tool back pack, light, drill and put my knee pads on! Keep up the good work and Cheers!!!

I live in south Florida. We barely get no heat calls. Learned a lot from your videos on these gas furnaces. Such great explaining salute

Great work you are doing, nice to see that someone cares.

Love the video, I know this is what I want to do. After 21 in sales I will be making the jump to HVAC-R.

I can tell you've got good work ethics. Very professional as well as the videos. Good job Sir.

Great video....keep them coming!!! One recommendation I have is to buy a Belt Hog, it is a laser alignment tool that you put on the pulley to make sure they are inline with each other.

Nice work. Just subscribed. I’m impressed that your a one man commercial shop. No easy feat. I’m in comm/ind and it can be a lot especially if your going to need more help on larger jobs.

Keep the content coming. Just found you and it’s great to see good work being done.

Im trying to move to commercial units. These kind of videos helps me a lot. Thanks .

You nail the explanation and details! Learning so much info!

Nice job! Nice going those extra steps to replace stripped parts instead of just throw screws in it! It will be fine now! 👍👍

Before all you scroll on the comments. Everyone says Commercialis better ✅ over Residential

like the way you take the time to explain everything, thank you

I like your videos. I follow a few hvac guys. Your production is really good. Im just a homeowner, but viewing you guys was the readon i could replace my entire homes system from mid 90s carrier gas pack 10 seer to a 2020 14 seer "homeowner" goodman, yes, goodman gas pack but im a trucker and never home. Went from old old 1950s crawlspace ducts to attic runs. I used a closet i never use for the supply and made 3 bew returns for airflow. House is like a meat locker now Please keep the videos

Drone shots are great. The video editing in these videos is crazy good

Very nice video. It's good to hear your opinion on the type of work you prefer as it certainly aids in my decision of residential or commercial. I'd rather start out in residential and light commercial

Good looking installs and professional work will continue to watch your content! Keep it up bud.

Great videos and very detailed. Im looking forward to starting Hvac school next month.

A treat to have roof hatches that big. And stairs too. Keep up the good work.

Great video I love the way you pay attention to detail and you always take the extra steps to go beyond and above keep keep making it happen Bro

I did residential for a year just to get noticed by commercial. Finally, I begin my quest in commercials starting April 3rd! Started from the bottom and now I'm here! I hate residential too much commission/sales based

I love the video! Great detailed explanations and love the work ethic and making things right. Quality video to match the quality. I also have the same question as in a previous comment...What was the deciding factor to go on your own and how long in the field before you did go on your own?

Great content, great quality work and I can’t forget to say that I see you got some dancing moves too lol. Keep it coming.

Just got my certifications Residencial hvac but I see you're experience makes me learn more on real Duty thanks for posting videos

Don’t know if I enjoyed the video editing or the AC work more!? All around great stuff brother thanks for sharing with us.

Hey brotha ,love the way u mix up the work videos. Appreciate the knowledge Mr Clean 💪

Love the videos I am gaining knowledge on my phone 🙏🏽🙏🏽 always learning

Really like your videos man, very informative. Personally whenever I change blower motors I like to put on a new pulley as well

Missed replacing the worn motor sheave... $$$. Excellent video, thank you for the content.

Just started watching your videos. I am a one man dog and pony show myself. I have a couple guys that help me from time to time but I find it can be more of a pain in the ass waiting on people to show up. You know how it can go people get fast cash and they spend it on things they probably shouldn’t. I can tell your still motivated to work and I like that you take extra steps to do the job right. I replaced a water heater today and had to rerun the gas line. They connected from the line a 36 inch gas flex the water lines were leaking so I replaced those and redid the 3 inch vent connector because the old one was 30 gauge. What I’m getting at is I could have been done in two hours out the door. Reused all the old stuff but why? I want them to not have to worry about anything for a long time.

Great video. Always look forward to your videos.

This guys is a beast really knows his stuff

Just found your video's Your doing a great job on everything you do HVAC\R contractor for 45 yrs Get 5 work shirt's with your name and your companies name on them Your a professional, your about ready to start a company Good luck

Your work speaks for itself ! Clean.going that extra step, Being in this trade 27 plus years. Its the fine / extra things that make or break you.. You got that extra in you In regards to residental or commercial..im partial to commercial refrigeration. But do a mixture of res.and comm. As I'm lately doing more residental. I miss the commercial.,one big reason..homeowners think your a robot on call just for them 24/7. God forbid you do not take care of them NOW.... Hey..you got me as a subscriber. Great work ethics !!! No doubt!! Bryan Tyler Refrigeration Helotes,Texas

YES 👍 LIKE YOUR VIDEOS CLEARLY EXPLAINED. YOU'RE A GREAT INSTRUCTOR AS WELL FOR THIS TRADE 😊

my guy takes pride in his service , clean stuff man

Thank you for this video, I liked it. Excelent tools, 100% professional

Kroil, the oil that creeps. Good stuff! Great video man, you are killing it! 👍

I am a Industrial Electrician...I love your videos with great experience keep it up ..God bless you..

Best HVAC channel on KZfaq. I’m a fan

Nice videos! Very educational & cinematic views 😃

Stand up job bud. I just watched your videos for the first time last night. The company I used to work for was a Trane/AS dealer, you're right about those hail guard instructions may as well just leave them in the box haha

Thanks for these videos I’m an apprentice and these vids help me out a lot

I enjoy the content you putting out keep it coming

I just got accepted into my pre apprenticeship today. Pretty excited!

Everything perfect, tools, equipment, construction, everything is wonderful!😁

I'm always curious about the replacement decisions, because I'm typically inclined to replace the motor pulley as well

Great to see others finding out about Aero Kroil. Made for the aircraft industry. Has been around since 1939.

Great stuff sir. Very professional, Very knowledgeable. Kool video

I really appreciate these videos 🙏🏻

This video is awesome info, I'm just getting into commercial hvac. This made it seem alot simpler to digest. Any tips are welcome

I've done both and commercial is definitely the way to go!!

Nice Video. As a building manager I need to understand repairs to communicate with owners. We tend to use equipment past useful life. Not always best decision.

I went commercial finally after 8 years of residential. I sure AF dont miss tight attics or hot attics. Money was great off the bat. I'm just had to get used to climbing tall ladders but it's all gravy now

Those ninja sounds are too funny!! enjoy your knowledgeable videos man.

Super interesting stuff never would have thought I’d being watch hvac videos

Commercial! I got into chiller work 10 years ago and haven’t looked back.

Love the content! Can you do a video of how you got started and tips for people wanting to get started like myself? Keep grinding👊🏻

Good work, and thanks for the video. The only thing I would have done differently (you asked.. :-) ) I would have aligned the pulleys and properly tensioned the belt. You don't need an expensive laser, just a good straight edge to span across both pulley faces. When ever you make adjustments to a motor carriage (on some units just tensioning the belt) proper alignment can be lost. I also like to coat the shaft where the pulley rests with some anti-seize compound.

Great video an awesome explanation and attention to detail thank you

Your video are the best and most informed

No i stand corrected, your work is amazing , sorry for getting drunk an sayin bs outa hand, but thanks for your channel!!!

He actually tested the motor current and it was close enough he didn't have to adjust the pulley sheaves. Good job ! He also replaced loosey-goosey spade connectors. An ounce of prevention goes a long way. He probably took a large rattle out of the machine by repairing the belt tensioner.

The Old Motor was a good Old GE. It was the noise of the Bearings. Bearings by nature are subject to wear and tear, and if only a tiny contaiminent enters or the Grease drys up or if you splat some Wd-40 on the Bearings, than they start squealing very bad and need replacement.

I'm a hvac technician from Greece. I prefer commercial a/c😁😁. Keep the good work buddy.... 😉

This video got me to subscribe and consider the commercial route.

Hey man, you left your camera on the roof! lol good video.

Haven’t even watched the whole video yet. Subbed. Good shit

Great video keep it up got some moves. You should do a video of how you got in the trade

Great detail you were taught well!

Residential all day long for me I didn’t like being under the sun all day long on a roof and being an extrovert i love talking with home owners and explain what i do and get some cool in my van between calls in Texas heat

I always loved low temp large square footage freezers but spent most of my time on Chillers up to 75 tons.Mostly Johnson Controls Pneumatic and electrical....I still get calls and I''ve been retired since 2010..Not many new Tech's have old school knowledge of un-loaders etc.I still guide them at times..Specialize and you'll always have work...lol more than you want often....

Nice and thorough repairs. Good catch on the motor mount/tension adjuster. Guessing someone before you just "moved the motor" by hand to adjust the tension and then put the self-tapping screw in to hold it from moving. Foolish and or rookie mistake.

Cool vid Bro. Thanks. I just picked up some maintenance contracts // and service repair for some churches in my area they are 3 phase I believe some are York’s and the other is carriers. If you get a chance on doing some more vids on maintainence or repairs. Will keep checking out. Thanks First class hvac

Great video! I can give you all of the rtu units you desire when you want to come to Indiana!

Love this guy!

Nice work brother.

I just got out of the commercial hvac field after about 2 years. After about a year, I realized that the trade isn’t for me, but I gave it another year just to be sure. It definitely has its pros, but I figured I’d try my luck elsewhere, but I left on great terms so I could always go back if I wanted

Quality hvac your videos are 👌 awesome..

Nice job and video like always

i love your nice clean designer jeans bro!

Im making the transition into commercial Work. I look forward to using some of your videos to help me along the way.

Good content. Only one suggestion, further diagnostic. What caused the temp limit to open (trip) in the 1st place. Safety switches shouldn't trip during normal operation, so you have to ask, why did it trip in the 1st place. I suspect that the blower motor was the root cause, which was replaced. But from my point of view of the video it was replaced as preventive failure not as the root cause of temp limit issue. And I'm only speculating based on what I saw. You may have thought through all of that and just didn't explain it in the video. Overall, keep up the good work.

great video, very helpful

Thanks for sharing ur knowledge

good jobe bro. i so love to see your video's. its help me to know how this sistemes works. i am also learned hvac technician and work in israel. i have learned " practical engineering hvac technician " wants to flay to canada to work in this Profession.

Nice video keep them coming.

I used to work with Trane Summit, nice software as long It programmed properly

Thank you for information great job

Very good video! Cool 😎