Common ESP Rainmaker errors and their solutions | ESP32 Projects

Common ESP Rainmaker errors and their solutions | ESP32 Projects | IOT Projects

Рет қаралды 12,843

Күн бұрын

This video is all about common errors that you might have faced while using ESP Rainmaker with Arduino IDE along with their solutions.
Get a free trial of the world's most trusted PCB design software, Altium Designer with 365 and 25% off your purchase: www.altium.com/yt/techiesms
Free search engine for the best quality components from Octopart: www.octopart.com
Official Notice from Rainmaker team regarding Budgeting
ESP RainMaker has found significant traction amongst the community and many people are using it for hobby, evaluation or educational purposes. RainMaker has been free and will always be free for such users. However, we have seen that some nodes are causing heavy traffic on our servers. To reduce such instances, we introduced a concept of budgeting which can cause messages to get dropped if they exceed a certain rate. Even then, some nodes are still sending heavy traffic. To prevent overburdening the servers, we will be de-activating nodes that are sending more than 25,000 messages in a day. If you see that your node is no more able to connect to the server, your node could be amongst the deactivated nodes.
Currently, we are not deactivating user accounts, but if we find that certain accounts are repeatedly violating these limits through multiple nodes, we may have to deactivate these accounts under our fair usage policy.
If anybody has any concerns regarding this, do let us know here or on the email address esp-rainmaker-admin@espressif.com
__________________________________________________________
👨🏻‍💻 Important Links 👨🏻‍💻
Erasing Flash Memory of ESP8266/ESP32 - • Erase flash memory lik...
Get ESP32 Board from our store - www.techiesms.com/product/esp...
Get XIAO ESP32 C3 board from our store - www.techiesms.com/product/see...
official GitHub Repo for ESPRainmaker Arduino - github.com/espressif/arduino-...
ESP32 Boards Package Link - raw.githubusercontent.com/esp...
__________________________________________________________
⏱ Time Stamps ⏱
00:00 Introduction
00:13 Do ESP8266 supports ESP Rainmaker?
00:34 Complete Step By Step Process of uploading Rainmaker sketch using Arduino IDE
06:03 Solution of the error "device not found"
06:57 Error at 2nd step of provisioning
08:30 Erasing Flash memory of ESP32 board
10:25 Explaining MQTT budget in ESP Rainmaker
12:00 Suggestions to never go out of MQTT budget
12:24 You ESP32 may be in blocked condition
13:00 Solution for getting the Error at 4th step of provisioning
13:42 Solution of the error "user doesn't have available quota"
14:53 Using ESP Rainmaker commercially for Home Automation startup
15:33 Do this if you didn't find the solution in this video
__________________________________________________________
🎥 🎙 My Video Gear 🎙🎥
Camera - Canon 750d
Lens - 50mm f/1.8 STM Lens (amzn.to/32gqnsi), 24mm f/2.6
Key Light - Godox SL60W (amzn.to/3522mHe)
Fill Light/Back Light - Osaka Lightning Setup (amzn.to/2I5cdDi)
Tripod - amzn.to/3uNhC4H
Microphone - Zoom H1N(amzn.to/3Osh12A)
Editing - Final Cut Pro X on MacBook Pro ( amzn.to/3vHcSyJ )
__________________________________________________________
Get connected with techiesms everywhere..
Subscribe Main Channel :- bit.ly/techiesms_youtube
Subscribe Shorts Channel :- bit.ly/techiesms_shorts
Facebook :- / techiesms
Twitter :- / imtechiesms
Instagram :- / techiesms
Website :- www.techiesms.com
Telegram - @techiesms
__________________________________________________________
techiesms
explore | learn | share
#ESP32 #ESPRainmaker #SolveHoJayega

Пікірлер: 78

@drelectronics13 Жыл бұрын

This video was awesome was waiting for so long ,and this is the only video on yt regarding rainmaker issue 🔥🔥

@techiesms Жыл бұрын

Thank You!

@fazle.elahi.tonmoy Жыл бұрын

Thank you so much for the video. It was really useful to solve my problems regarding Rainmaker platform.

@techiesms Жыл бұрын

Glad it helped 😇

@gustavoprada1835 5 ай бұрын

You are the best friend. I learn so much with your videos. Greetings from Argentina

@rupeshkoulge1616 19 күн бұрын

Thank you so much, it really helped

@knightautomation2020 Жыл бұрын

Thanks alot for this!

@amisharathod5813 Жыл бұрын

Bhai Solid Solutions Lavya Cho !!! 🔥🔥

@techiesms Жыл бұрын

Thank you 👍🏻

@firdoshdiakus4841 Жыл бұрын

yes thanks, pity it did not come earlier as in your home automation project the temperature data was sending updates every 2 seconds and this is why I could not understand why My ESP showed off line after a day of using it. I have since increased this time and it seems to be working fine now 😊

@techiesms Жыл бұрын

Great

@adxelectronics1361 Жыл бұрын

Thanks man 😍😍

@thelazycreator6322 Жыл бұрын

U saved my proj sir

@kirankumar-mi4pc 2 күн бұрын

After uploaded the code QR code was not showing in serial monitor how can i rectify this issue

@rubialugattimoreira1978 Жыл бұрын

Tks! 😊

@yttoonz6307 10 ай бұрын

Hi Sachin, Does it need a cooling fan for heat dissipation of microcontroller to insert into board?

@mr.electrofire Жыл бұрын

Thanks sir

@scientistBENIELSLAB Жыл бұрын

6:09 thanks a lot man

@techiesms Жыл бұрын

Glad to hear that it helped

@masoudjafarzadeh Жыл бұрын

Hello I also sent my information in the program every 3 seconds, and because of this, Rain Maker blocked me I modified the program and flashed the micro Everything was fixed according to your explanation Thank you for your guidance

@MageshMahiTech 7 ай бұрын

Still your code working bro ???

@NhatNguyen-sl8hk Жыл бұрын

thanks for your video. i am having an issue that the data from the sensor is not automatically updating on the app. every time I update I have to refresh the app. can you help me to solve this problem?

@sreekar.2002 Жыл бұрын

i have uploaded the code and there are no compilation errors. But I am not getting QR code in serial monitor

@kiranendude4523 Күн бұрын

Same problem arises🥲🥲have you solved it ? Please guide me.

@sreekar.2002 Күн бұрын

@@kiranendude4523 use wifi rather than mobile hotspot Check your code where you are writing the code for qr code Try to upload example code

@rakib6393 Жыл бұрын

If my budget is 1024, will it be permanently blocked at 1024? For example, if 1024 decreases from there to 1023, then after 5 seconds will it be 1024 again or will it remain 1023?

@satyamshukla3865 Жыл бұрын

Hi, how to enable local control in rainmaker using Arduino

@sharmaji-li6mi Жыл бұрын

Esp rainmaker project is getting crashed when i do switch on / off fast -fast. I used 4 channel relay module with esp32 and taking 4 input with internal pullup resistor of esp32 to control devices manually. but its getting crashed when i do switching fast. It starts giving norrmal data to garbage data on serial monitor. now i have restart the board to work properly but again on switch it get crashed.

@obadiahkupshak7140 5 ай бұрын

Can esp32 be interface with acs712 using esprainmaker to measure current?

@mirwajidali6862 Жыл бұрын

Hi Sachin! I am experiencing an issue with my Rainmaker project. I have tried using your same sample code (got from your Github) but instead of showing anything in serial monitor, it gives me two errors mentioned below o E (4797) wifi_prov_mgr: Failed to create additional endpoint o E (4797) esp_claim: Failed to create claim end point. I tried searching alot but didn't find anything on the internet. Can you please help me out with this? I have already tried multiple MCUs both Rev1 and Rev3. Also tried flashing them and reburn the code but still no luck

@sparsh_editx Жыл бұрын

Google home not connecting?

@siddhakumarlimje1607 Жыл бұрын

Sir, please help me with the working of 5V 30 amps relay module. I am facing problems with it. The relay is not triggering when connected to 5 V module . I also tried with another new 30 amps relay but it also does not trigger. Whereas 5v 10 amps relays are working perfectly with the 5v power supply. Sir , please help me to fix this......

@Healer98 Жыл бұрын

I'm also getting stuck at the 2nd provisioning problem so did the flash memory thing and it's still the same...is it my board problem or the code.... I'm using Arduino IDE 1.8.16 software and using the esp32 version 2.0.4 to program...any solutions...

@SaiKumar-jr4ib Жыл бұрын

lol same here also dude if u found any solutions pls let me know ,,.....

@shukur533 Жыл бұрын

when my wifi disconnect to esp32 esp rainmaker app goes offline it's ok. but when wifi turn on, esp32 never connect to wifi automatically and rainmaker app always show offline. but when i press esp32 EN button it connect wifi prefectly and esp32 come to online. How to fix it?

@masoudjafarzadeh 10 ай бұрын

Hi dear friend While admiring you I have a question I wrote a program in which I want to use the following command to send an important message to the phone esp_err_t esp_rmaker_raise_alert(const char *alart_str) Can you show me its format with an example? Thank you again

@TechknowledgeHome 6 ай бұрын

Pllease make a video on adding Time Services in ESP RAINMAKER.

@hamzo318 Жыл бұрын

@techiesms am having issue while connecting with ble, i select my device name PROV_ and then upon clicking it says "error! Failed to connect to device" I uploaded same code on different board, that one worked fine I thinks its error with board but blynk code for bluetooth runs fine with it!

@hamzo318 Жыл бұрын

Bluetooth was also on and not paired to any device!

@rakib6393 Жыл бұрын

Sometime my esp automatically go offline even the wifi connection is available....how to solve this?

@scravengerx Жыл бұрын

Can you make video comparing rainmaker vs home assistant ?

@jonathwyllams 4 ай бұрын

Unfortunately, even with the tips, my esp32 still has the device not found error.

@mohammedelgizawy6730 Жыл бұрын

Hi , Could you please tell us how to get URL Api key for rain maker as the api key of Blynk ?? also I need to know how to using OTA job of rainmaker ?? last question how to make pushbutton device in rain maker??

@henock9307 Жыл бұрын

Thank you very much for all these details, but I have a problem Rainmaker is not displayed on the list of the partition Scheme how to solve this problem?

@techiesms Жыл бұрын

What’s the actual error please tell me ?

@henock9307 Жыл бұрын

@@techiesms Sorry for the late reply, I saw the late message. The problem with my arduino IDE is that in the repatition Scheme RainMaker does not appear, is a library needed for that?I send you the picture on instagram

@sanmeetsingh8219 Жыл бұрын

Hi Sachin, I have a question. Can you make a detailed video on Home Assistant that shows how to control switches from an ESP8266 with 4 relays and 4 manual switches? I have been searching online but have not found a good tutorial. Could you help me with this, please? bhai pura internet dhoond lea iss k bare me nai mila kuch bhee...

@thinkerrobotics Жыл бұрын

i have a jlc pcb coupon so in can order in 2 dolors pls help me

@rajendrarv Ай бұрын

thanks for wonderful video, for me rain maker got automatically disconnect and than it could not connect automatically

@rajendrarv Ай бұрын

please help me

@ravirajkala Жыл бұрын

Pl address the wifi reconnect issue also. The ESP32 rainmaker does not reconnect to wifi after wifi outage.

@mohammedelgizawy6730 Жыл бұрын

How can get Api kays as blynk api keys

@satyamshukla3865 11 ай бұрын

How to do ble provisoning without "pop" Do not want to scan qr code

@sreekar.2002 Жыл бұрын

can we use our mobile hotspot to connect to esp32

@Rohan-ol5uk Жыл бұрын

Try making home automation with Xiao esp c3 board with rainmaker

@Mr_Devil_2512 Жыл бұрын

Fail to confirm node association.... Please solve.

@nickautomationtech6687 9 ай бұрын

how to upload code in esp32 through esp rainmaker OTA..?

@cran1992 Жыл бұрын

Hi techiesms, I need your help to solve this problem. I trying to connect my rainmaker app with my mobile, but not successed. After scanning QR code Bluetooth connection established. During Wifi credentials step, wifi names not showing trying to rescan but not succeed. Do need full. Note : Another mobile wifi hotspot i am using as router. That mobile wifi name not showing in rainmaker app even tried by another mobiles hotspot too.

@cran1992 Жыл бұрын

03:58:13.344 -> E (579) esp_rmaker_device: Failed to allocate memory for Device Switch1 03:58:13.344 -> E (579) esp_rmaker_device: Failed to allocate memory for Device Switch2 03:58:13.344 -> E (581) esp_rmaker_device: Failed to allocate memory for Device Switch3 03:58:13.344 -> E (587) esp_rmaker_device: Failed to allocate memory for Device Switch4 03:58:13.344 -> E (594) esp_rmaker_device: Failed to allocate memory for Device Temperature 03:58:13.380 -> E (600) esp_rmaker_device: Failed to ocate memory for Device Humidity

@cran1992 Жыл бұрын

Above mentioned errors I am received after hit an upload, kindly suggest what to do.

@RameezRazaRiaz99 Жыл бұрын

bro for me it is unable to find any wifi network. please help me out.

@premharshan7883 Жыл бұрын

Can we connect the speaker to A9G module. can you make a video about that..

@techiesms Жыл бұрын

yes, it has a dedicated speaker connector

@AliReza-xl4zw Жыл бұрын

Where Can we download the Code?

@sameersameer5288 5 ай бұрын

If power is cut esp32 doesnot connect to wifi only show red light Does not connect to wifi

@RealtyGuidanceHub Жыл бұрын

bhai IndieNode application ka video bana

@nandabarunasaputra8861 Ай бұрын

Hai, My ESP32 cannot display qrcode on serial monitor arduino ide. I'm already installed every library needed, can you help me? Thanks a lot

@kshitiznavediya2559 8 күн бұрын

esp board download 2.0.3

@kiranendude4523 Күн бұрын

@@kshitiznavediya2559 Thank you, it worked😃

@kshitiznavediya2559 Күн бұрын

@@kiranendude4523 welcome

@thinkerrobotics Жыл бұрын

Pls make a gps tracker sis button and spy mic using a9g using micropython

@mohammedelgizawy6730 Жыл бұрын

How can chat with you??

@nathanieladdo-quaye4542 Жыл бұрын

Hello, Techiesms I was working on an Home automation project with ESP Rainmaker where I want to use their REST APIs to connect to my Mobile App I was building. But I have been having challenges with that. I tried the swagger page for their RESP APis but anytime I enter my Auth TOken it does not work, I receive a failed message trying. I have been trying this for more than 2 months. So I will ask if you can help me by doing a tutorial video on how to use the REST API of ESP Rainmaker like the one you have for the Blynk Cloud REST APIs so that people also facing such a problem will get the solution

@nathanieladdo-quaye4542 Жыл бұрын

please anyone here to help me understand?

@roopsvinay Жыл бұрын

So u were able to use the solution provided by me on your WhatsApp for the problem stated at 7.02 min

@kaspervanlierop Жыл бұрын

i was wondering if anyone could help me. i have used rainmaker on a esp32wroom one time before. now i want to use it on a esp32-C3. i use the example switch sketch and it compiles and uploads fine but after i never get the qr code or link. in the serial monitor i get the following: btdm: bss start 0x3fcdf0a8, len 40 btdm: data start 0x3fcdf09c, data start rom 0x400591fc, len 12 MAGIC fadebead VERSION 00010006 E (16445) simple_ble: simple_ble_start enable controller failed 257 E (16451) protocomm_ble: simple_ble_start failed w/ error code 0x101 E (16457) wifi_prov_scheme_ble: Failed to start protocomm BLE service E (16463) wifi_prov_mgr: Failed to start service upload settings: Board esp32c3 dev module USB CDC On boot ‘disabled’ Cpu freqentcy 80Mhz(wifi) Core debug level ‘none’ Erase all flash before sketch upload “enabled” also tried with disabled Flash frequency 80mhz Flash mode QIO Flash size 4MB(32Mb) JTAG Adapter disabled Partition scheme rainmaker Upload speed 921600 i Hope someone can help me