Complete Overview of My Restored Bass Tracker!
Рет қаралды 49,676
4 жыл бұрынFollow the facebook and instagram pages to stay up to date!
Links to the products I used:
Vinyl Flooring:
www.defender.com/product.jsp?...
Engine Hour Meter: www.amazon.com/gp/product/B01...
Lower Unit Plug:
www.amazon.com/gp/product/B00...
Carburetor Rebuild Kits:
www.amazon.com/gp/product/B07...
Water Pump:
www.amazon.com/gp/product/B00...
Inline Fuel Filter:
www.amazon.com/gp/product/B00...
Stainless Transducer Mounts:
www.amazon.com/gp/product/B01...
New Prop:
www.amazon.com/gp/product/B00...
Spark Plugs:
www.amazon.com/gp/product/B07...
Radio Antenna:
www.amazon.com/gp/product/B00...
20AMP Inline Breaker:
www.amazon.com/gp/product/B07...
60AMP Inline Breaker:
www.amazon.com/gp/product/B07...
Heat Shrink Tubing:
www.amazon.com/gp/product/B07...
Double Switch Connectors:
www.amazon.com/gp/product/B00...
Stainless Magnet:
www.amazon.com/gp/product/B01...
Clipboard Clips:
www.amazon.com/gp/product/B07...
3-Position Blue LED Switches:
www.amazon.com/gp/product/B00...
LED Deck Lights:
www.amazon.com/gp/product/B07...
Helix 7 Sun Covers:
www.amazon.com/gp/product/B07...
Stainless Angle Brackets:
www.amazon.com/gp/product/B07...
Switch Panel:
www.amazon.com/gp/product/B08...
Radio:
www.amazon.com/gp/product/B06...
Cup Holders:
www.amazon.com/gp/product/B00...
Electrical Connectors:
www.amazon.com/gp/product/B01...
Stainless Screws:
www.amazon.com/gp/product/B07...
Tilt / Trim Switch:
www.amazon.com/gp/product/B01...
Aluminum Piano Hinges:
www.amazon.com/gp/product/B00...
Small Flooring Roller:
www.amazon.com/gp/product/B07...
Large Flooring Roller:
www.amazon.com/gp/product/B07...
Flooring Glue (Did Not Work Great)
www.amazon.com/gp/product/B07...
Helix 7 RAM Mount:
www.amazon.com/gp/product/B01...
Stainless P-Clamps:
www.amazon.com/gp/product/B07...
50AMP Trolling Motor Plug:
www.amazon.com/gp/product/B07...
Remote Flush Mount Plug In:
www.amazon.com/gp/product/B00...
2 Pin Sockets (Docking Lights)
www.amazon.com/gp/product/B07...
Latches (Non-Locking):
www.amazon.com/gp/product/B00...
Latches (Locking):
www.amazon.com/gp/product/B00...
Navigation Light & Socket:
www.amazon.com/gp/product/B07...
Anchor Light & Socket:
www.amazon.com/gp/product/B01...
Floor Drain:
www.amazon.com/gp/product/B00...
Stainless Staples:
www.amazon.com/gp/product/B00...
Docking Lights:
www.amazon.com/gp/product/B00...
@steven33068 2 жыл бұрын
I've spent the past three days watching every one of your tracker restoration videos. Man I was so utterly impressed with your work. I was so impressed that I went out and found the EXACT same boat, a bit newer but the same and ill be doing the same thing to it. I would have never attempted something like this without your trailblazing here.
@stonekoldyn4904 4 жыл бұрын
Thank you! Best no nonsense, straight to the point video I've ever seen!
@TheJessStockton 4 жыл бұрын
The Bass Tracker looks amazing Man! I’ve finally got mine running and I’m looking forward to winter to dig into it. You have given me so many ideas to both improve and preserve this baby. Seriously it looks very nice, great job.
@chrisdavis6789 3 жыл бұрын
You have done a great job on this restoration. Fantastic work on the design changes and additions. Looking forward to more!
@DanGriffin10 2 жыл бұрын
Can't tell you how much I enjoyed watching this whole series. I bought an '89 Bass Tracker Pro Guide 16 recently and you've inspired me to make some upgrades and updates. Nice work brother!
@thomashardwick673 4 жыл бұрын
Looks great have watched all the video on the build. Did a great job.
@bearthehunter Жыл бұрын
WOW!! This boat turned out amazing! Thanks for the ideas. I'm looking at a V-hull Bass Tracker 17 from 1992 and I think a lot of these mods will work great on it.
@brandonnapier2117 3 жыл бұрын
Thanks for all the bass tracker videos. I just bought one and they're going to be a big help to me. Looks amazing!
@thecctwinsoutdoorandgaming9847 3 жыл бұрын
Same
@scottrheome6217 3 жыл бұрын
Amazing job!! That is absolutely beautiful and you are insanely talented. I would take that boat over most newer boats. Great job!!
@90_day_outdoors73 2 жыл бұрын
Thank you so much for these videos. I am about to do exactly what you did to your boat on my 1991 Alumaweld 17ft bass boat. Everything you did I am doing so its nice to be able to have a game plan and items purchased prior. I work overseas and only have 3 weeks at a time at home which makes it hard to do anything lol. Hopefully I can knock it out in a week or two so I can fish a week before I'm back in the desert lol.
@clayl9202 2 жыл бұрын
I am really impressed with the work you've done on this boat! I have an '89 Pro 17, pretty much the same hull and configuration as yours, and I've gotten a lot of ideas from what you've done here. You already answered several questions I had, and given me new ideas for them. Excellent video!
@ericsloan7089 3 жыл бұрын
We have a tracker tournament Pro 18 and this has been an eye popping transformation. Looking forward to some of the same customization on ours.
@tnriverbanks 3 жыл бұрын
Great job. I just purchased a 94 Alumacraft classic deluxe. Very cool boat and plan to do mine. You have me some great ideas. Thank you. I subscribed. Have a safe hunting season.
@blazemccroskey9901 2 жыл бұрын
Thanks for making this video and taking time to make links. You did a fantastic job!
@SanSabath 3 жыл бұрын
Damn man, awesome rebuild! Very creative
@mrroo2311 2 жыл бұрын
Well what a 4hrs of watching these videos tonight. I must say you did awesome but I’m sure you knew that. I like how you second guess yourself as well. Can’t wait to start redoing mine. Find your videos by seeing how to remove the seats. Well little over 4hrs I’ve watched them all. Thanks for the series.
@rogerchandler9737 4 жыл бұрын
Wow......one nice job! I have the same boat but as yours, but this is off the chart.
@andrewmccuen5897 4 жыл бұрын
Great series man! Deserves way more views. I have a 1990 Bass Tracker that I’m restoring!
@Bene_Factum Жыл бұрын
Awesome video! I am getting ready to overhaul my 80's bass tracker and found your video. You have a new subscriber, cheers!
@thebustedwedge1141 3 жыл бұрын
Nice job on the restore! It looks awesome! 👍
@derek2114 4 ай бұрын
Been following for years. More boat update videos! Currently trying to finish my 1990 Bass Tracker. These videos have helped me so much. Keep killing it.
@PUTEMDOWNProductions 3 ай бұрын
More coming this summer! Had to take a break to build a house
@jakemodrell3821 4 жыл бұрын
Very nice build. Some really good ideas
@marcusolah6245 4 жыл бұрын
i just got my 1993 bass tracker tx 17 and cant wait to starting making it my own. yours is amazing! starting to watch all your videos for ideas
@biscuitmufflers2351 3 жыл бұрын
How long is it with the trailer?
@PUTEMDOWNProductions 3 жыл бұрын
24’ ish
@biscuitmufflers2351 3 жыл бұрын
@@PUTEMDOWNProductions is that including the motor?
@bidkid2020 3 жыл бұрын
That is a vantastic job most definitely if you did it all yourself you should be very proud you set the boat up very nicely
@PUTEMDOWNProductions 3 жыл бұрын
Thank you
@preppy.person8241 4 жыл бұрын
been watching your videos and it inspired me to rebuild me 88 pro 17 thanks for the awesome videos keep up the great work.
@kingporret 4 жыл бұрын
This is amazing! I’ve been following your videos and watched all your videos on the build. You make it all look so easy lol. I’ve got a 1991 tracker tournament-v with a 2003 60HP Merc on the back. I’ve basically been trying to do some of the mods you’ve made on your boat to mine but I can’t keep up lol. Amazing work, especially the work on the motor and the added decking, floor updates and rod lockers!! Keep up the great content. Would like to see some videos of it in the water or catching some pigs !
@markvroman2426 4 жыл бұрын
Very nice job. Planning on using your videos as guide on doing my tracker.
@cobrajet8866 2 жыл бұрын
outstanding. most value on the water!
@c.shoefish 3 жыл бұрын
Awesome build man...for your rod bungees, flip em around so the clip is towards the outside...that's what I did and it works well
@dexterjackson8273 4 жыл бұрын
Love it!!!! I'm slowly working on mine.... Awesome Finish ...
@fordman19892000 3 жыл бұрын
Great looking boat.
@cowboygonzalez7824 3 жыл бұрын
Came out legit man! I gotta go back to your first video ha good job though!
@robertjohnson8742 2 жыл бұрын
Thanks for the video, you have done one find job. I have a 2009 Bass Tracker Pro Crappie 175 , & I have been looking to do a upgrade on my boat. I really like the way you did yours. I going to my something like the way you done your.
@dennisharrison4744 3 жыл бұрын
Good looking boat done right i been working on my 1994 alumaweld exspress bass boat all aluminum 0 wood in it carpet in mine purdy good had rewire lights and get new nav lights put all new dark blue gray seats in it got a fully loaded helix 5 on the dash and got a plain helix 5 on front and a trac 25 anchor winch in back
@jasonradcliff2035 3 жыл бұрын
Outstanding man!
@803daltonb 4 жыл бұрын
Nice man! 👍
@spencer6764 2 жыл бұрын
Fantastic Job Sir. I have a boat just like yours but with a different floor plan. But you gave me some great ideas unless you would like to do another one. LOL 👍
@diggindrums3260 3 жыл бұрын
Good job man, wow!
@dennisharrison4744 2 жыл бұрын
One of the best looking trackers iv seen when i was looking for a boat every one i looked at was over priced need a total redue i got lucky found a 94 xpress 17ft with a good 85hp yamaha for 3k with new min kota edge 45 lbs thrust and helix 5
@rick4649 4 жыл бұрын
Very nice. Great job.
@stephenearly9550 3 жыл бұрын
Dude! Your boat is solid! 👍🏻👍🏻👍🏻 go fishing!!!!!
@aqualung1466 4 жыл бұрын
You are very talented, I wish I had your skills.
@jonpatterson5668 3 жыл бұрын
Dude ,you might and might not know it, start small and do it
@casey2562 11 ай бұрын
Beatiful job!!!!
@samuelgrissom4499 3 ай бұрын
I just recently bought the same boat and I thought mine was clean! Might take some of these ideas!
@jacksonbeverly3250 4 жыл бұрын
Great job
@greenninja74 3 жыл бұрын
Nice job on the boat
@nelsonporter8387 Жыл бұрын
Great job!
@that01gt20 4 жыл бұрын
looks great!!!
@brendonmanship8854 3 жыл бұрын
Cool video brother! I just bought an 04 g3 175 silver eagle that I'm going to restore. Tips appreciated!
@williamjohnson1609 4 жыл бұрын
Awesome thanks looks great!
@Therapy-n-Session Жыл бұрын
I’m Enjoying your videos man…. I’m looking to build a rod locker on my 2022 Bass Tracker Classic XL
@timothygilles494 3 жыл бұрын
Outstanding
@justonemmett8604 Жыл бұрын
We’ll done, thanks for sharing!
@terencegillespie6675 3 жыл бұрын
Nice work.
@Ginger924 2 жыл бұрын
Nice build dude would love to see a year later review on it and see what you would change or do differently. I have a 91 bass tracker that I’m working on and your videos have been a great help.
@PUTEMDOWNProductions 2 жыл бұрын
I have the review video complete just need to post it! But so far i havent found anything i would change
@Ginger924 2 жыл бұрын
@@PUTEMDOWNProductions great to hear! Hope to see that video soon.
@RacksnBass 3 жыл бұрын
Well done
@ms0099rg 4 жыл бұрын
Did you do video on the transducer mount and wiring.? Great build!
@PUTEMDOWNProductions 4 жыл бұрын
Yes both the front and rear
@leeadams5941 2 жыл бұрын
great project, hope you put some sort of plastic between where you put stainless on the aluminum so you dont get dissimilar metal corrosion
@a.scottdagata9274 3 жыл бұрын
Look in trailer supplies you can get a recessed loop for your rod holders on deck
@dennisharrison4744 2 жыл бұрын
You put effort into it for shure thats what i done to mine even new set of trailer steps and put fully loaded helix 7 at the helm
@cipribolos7048 Жыл бұрын
You have to start your own business from this!👌👌👌
@eagleeye9549 2 жыл бұрын
Nice!
@02jeepwj Жыл бұрын
For rod straps I honestly prefer the Velcro style or the ones like what come on the Vexus boats
@robertcapozzi2934 2 жыл бұрын
Real nice don't have a bass tracker but I have a sea nymph bass attacker
@dennisharrison4744 3 жыл бұрын
I realy like my alumawed 17ft i got about 3 weeks ago has a yamaha 85hp on it this winter going to put new fuse box in like yours
@sabertoothdog20 3 жыл бұрын
Love the rebuild look great where did you by the Bilige pump and live well system at
@PUTEMDOWNProductions 3 жыл бұрын
Amazon
@alwayshustle5591 3 жыл бұрын
Phenomenal job! Looks great front to back. Quick question for your dock/drive lights... where did you get the quick release mounts for the lights... I’ve been wanting to do same mod since before I saw yours, but need a quick release solution.
@PUTEMDOWNProductions 3 жыл бұрын
They are tripod quick release plates used for cameras
@TheUASAIT 4 жыл бұрын
Great job. I have a 93 and am working on it now. Couple of quick questions. Where did you get the new cable for the starter? The 20 amp breaker-was it going to your fuse panel? I believe the 60 was going to the trolling motor. Love the tweaks and will post some videos as we get it a little closer to being ready. Need to do a VRO delete next, but not a huge priority since most lakes around here are trolling motor only...
@PUTEMDOWNProductions 4 жыл бұрын
I got the cables off Ebay, and yes the 20amp breaker goes to fuse panel. I use it as protection as well as a battery disconnect. www.ebay.com/i/301870734220?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=301870734220&targetid=915852593453&device=m&mktype=pla&googleloc=9017979&poi=&campaignid=10459841985&mkgroupid=104612010420&rlsatarget=aud-622524042958:pla-915852593453&abcId=2146002&merchantid=101685145&gclid=CjwKCAjwmMX4BRAAEiwA-zM4JneXamuELBalEReqOgvbM5YJ0WrgDkLjVT4_ipTRY-mzaZkhyuUtTxoCWBEQAvD_BwE
@derek2114 3 жыл бұрын
Will you do a year update on all of the things that you have done to your boat and tell us what you are still happy with and what may have failed if anything in the past year?!
@PUTEMDOWNProductions 3 жыл бұрын
Yep plan to in the next couple weeks!
@atomicslam1589 2 жыл бұрын
This is spectacular....well done! I love the vinyl flooring. I've never been a fan of the carpet (especially here in FL) it always wears out and looks awful, and it always get's mildew and stinks. I think I could hang with all of it other than the engine rebuild. That would intimidate me. Were you able to do the engine rebuild while it was on the transom, or did you have to pull the powerhead to have it machined??? Great job brother, that's incredibly inspiring.
@PUTEMDOWNProductions 2 жыл бұрын
Had to pull the powerhead off and lower unit off to rebuild
@HerbertJordan-jr2lz Жыл бұрын
One of the best boat restore I have seen. How many hours did this restore take and what was the total build price, I am going to restore my John boat and my 79 cajun bass boat, this info will give me a ideal of what my build will cost and a time fram. Awesome job.
@PUTEMDOWNProductions Жыл бұрын
Not sure total cost maybe $1000 or so it took me about a month a few hours here and there
@dennisharrison4744 2 жыл бұрын
I just re did my 94 xpress built a all alumin front deck extension and all new carpet i found 2 hatchs similer to ones in my boat there all water proof dry stprage got 4 hatchs in front now
@mikeboley8488 3 ай бұрын
Im in the middle of doing a restoration of my own on an aluminum deck boat. 3 years later, how are rhings holding up and do you have anything you night change as far as materials or process? I really enjoyed the videos!
@russellkamp8923 3 жыл бұрын
Fantastic! Great job. How slick is the vinyl to walk on when its wet?
@PUTEMDOWNProductions 3 жыл бұрын
Not slick when wet, but would be with freezing spray
@danbeach123 3 жыл бұрын
Nice job thinking of doing the same on my boat about how many yards of vinyl did you have to buy and what glue would you recommend been searching thru you post for as much info as possible trying to do a cost sheet thanks for your time
@PUTEMDOWNProductions 3 жыл бұрын
I used roughly 12 yards, not sure on glue but i wouldnt use what i did... it has held up ok but took forever to dry!
@user-qb8cn7gf1u 9 ай бұрын
Anything you would change today? I have the same exact boat that I am finishing the motor work on now and then going into cosmetics and upgrades. You happy with the docking lights? Worth it or not? Any recommendations?
@mikegriffith6287 2 жыл бұрын
GREAT video series. Have you noticed any issues with the vinyl being too hot in the summer sun (vs. carpet)?
@PUTEMDOWNProductions 2 жыл бұрын
No issues
@michaeladams7562 2 жыл бұрын
This is awesome, where did you get the diamond plating for your dash?
@PUTEMDOWNProductions 2 жыл бұрын
Was just a piece they sell at menards or lowes
@kennethdixon1336 3 жыл бұрын
Good morning I have watched your channel and I like it a lot. I just bought a 2002 bass tracker xt 17 40 hp tracker engine. I would like to know if it was hard to install the lights up front and the lights along the sides of the boat?
@PUTEMDOWNProductions 2 жыл бұрын
It wasnt terrible, id remove the front switch panel and front deck to make it easier for ya
@marklopez8378 3 жыл бұрын
Hi there, I'm nearly finished with my bass tracker face lift.. thanks for all your help, I want to put some lights as you did in on your boat,so many choices and prices most lights are plug in type for a house outlet, How did you setup yours. This will be underneath the inside gunwale and about total 35" Thanks Happy hunting and fishing
@PUTEMDOWNProductions 3 жыл бұрын
I purchased 12v led strip lights and then modified them to work on the boat. Why i didnt make a video is because it took quite a bit of modification to make everything work with a remote control all on the same circuit.
@chrisellis2887 3 жыл бұрын
Exceptional videos! Thank you for these. I am re vamping an 85 model TX 17. My question is about the weight of the plywood. I saw you used 3/4 treated . How much overall weight do you think it added and did you see any issues with it dragging down the front of the boat? I really like this deck mod and plan to do myself. Thanks for any response and answers.
@PUTEMDOWNProductions 3 жыл бұрын
The deck itself was the same thickness as factory plywood, so it didnt add any weight, i dont notice any difference driving the boat with all my mods
@user-dv6ob5lp8w 11 ай бұрын
I have a 2013 Tracker 165 and like what you have done to your tracker. I pretty much did the same to mine. I would like to build a cabinet in front of the console but my live well would stop me from putting the piano hinge there. I need come up with away to do that. My question to you is was the plywood you used 3/4" thick? How much vinyl did you order? I pretty need the same since my boat is roughly the same size. Neil
@PUTEMDOWNProductions 10 ай бұрын
Vinyl was ordered by the yard and i used 12 yards I believe, plywood was one sheet for front deck, one sheet for floor, and one sheet for compartments i used 5/8 I believe
@jimfitzgerald9761 3 жыл бұрын
Awesome job, boat looks great! Where did you find the tread plate console trim?
@PUTEMDOWNProductions 3 жыл бұрын
I made it from a piece of diamond plate
@jimfitzgerald9761 3 жыл бұрын
Man that's some skilled work. Very impressive! I may attempt that my self.
@souuu1154 Жыл бұрын
Any tips for routing new 8 gauge wire for a trolling motor? Everything seems super tight within the two main holes that feed to the back
@PUTEMDOWNProductions Жыл бұрын
It will fit through there and then take the panel off by the console and the front deck for easy access
@johninnz 3 жыл бұрын
Gidday mate, I watched your other video on the Aluminium Brightener. Just wondered if the tarnish has come back at all? .....if so did the clean finish last long? Thanks in advance for the reply, John.
@PUTEMDOWNProductions 3 жыл бұрын
If you wax or polish after it will stay clean for a really long time
@tobyduff3584 2 жыл бұрын
I've watched most all your videos...they are great. In one of your videos I remember seeing the homemade support for your boat cover. I cannot find this video now. Do you recall which video this would be in?
@PUTEMDOWNProductions 2 жыл бұрын
kzfaq.info/get/bejne/oLuJYMKHuLWvlok.html
@tobyduff3584 2 жыл бұрын
@@PUTEMDOWNProductions awesome...thanks!!
@WhizzBang513 2 жыл бұрын
I’m about to buy a Bass Tracker myself
@w_dub_wilberforcejr 3 жыл бұрын
nice job!!!! how deep is the garage? I'm thinking of doing the same but concerned if it will fit. only have 19'-8" to work with.
@PUTEMDOWNProductions 3 жыл бұрын
That will be tight mine is 25 by 40
@RIC2102 3 жыл бұрын
What's the longest rod you can fit there? Great job, congrats.
@PUTEMDOWNProductions 3 жыл бұрын
I can fit my 8’6” musky rods in there
@jerryely2573 2 жыл бұрын
You have done an excellent job! I have a 96 Tracker! Having trouble with trolling motor power ! Probably something stupid I’m overlooking! Where could I get wiring diagram? Anyway, your boat looks great!
@clayl9202 2 жыл бұрын
Hi Jerry -- I have an '89 Tracker Pro 17, and I have the wiring diagrams and codes for all of the Tracker boats from that era. Send me an email and I'll reply with the diagrams.
@semiauto3148 4 жыл бұрын
Looks awesome. Do you have a vid of you running it in the water ? And how many rows of the deck lights did you use ?
@PUTEMDOWNProductions 4 жыл бұрын
Not yet but i will in the next few weeks, hard because my wife doesnt like being in the videos but she always wants to go fishing with me...
@semiauto3148 4 жыл бұрын
PUT EM DOWN Productions hahaha. Man you replied faster than I thought you would.... how about the deck lights? And I have an 88 model tracker with 60 merc. Thinking about selling it and stepping up to longer boat. What in your opinion would be a decent asking price? It’s in pretty good shape. Just like all boats this age. Could use a little tlc. But over all. It’s not bad. Just ready to move up to at least a 18 footer. Thnx
@PUTEMDOWNProductions 4 жыл бұрын
Ive been seeing them sell for $3500-4000 in my area which is double what it was two years ago... crazy boat prices right now, the deck lights i bought were two 16ft strands i used prolly 10ft of each strand and wired them together under the front panel, they are linked in the description but took some modification wiring wise to make work on separate sides of the boat
@semiauto3148 4 жыл бұрын
PUT EM DOWN Productions thnx a lot for the reply... that’s about what I had in mind. When I get something new. I want to add the lights like that. Looks cool. You did a stand up job bud. Wish I had your skills....congrats on a fine boat
@cinnreds18 4 жыл бұрын
Good looking amount of pelts in that wall.
@chuckbeams Жыл бұрын
Ryan, I need some help! I'm working on the Pro 17 and need some thought on relocating the seat pedestal, trolling motor compartment and new lid. I'm going to add a tackle storage area in front of the helm like you did and a rod storage box. Could you shoot me the measurements?
@PUTEMDOWNProductions Жыл бұрын
I based all my measurements off of tackle box sizes i use and rod length i use
@timmyvision1 2 жыл бұрын
GREAT INFORMATION. FIXING TO RECARPET MY 2009 BASS TRACKER 175 PRO CRAPPIE AND ADD A FEW ACESSORIES.HOW CAN I GET A DIAGRAM FOR WIRING OF THIS BOAT?
@PUTEMDOWNProductions 2 жыл бұрын
Not sure, i would look on forums
@weyoungstrom 3 жыл бұрын
Good morning. I have absorbed most of your content as i have a 1988 pro 17 im rebuilding. Cannot find the specs. What size fuel tank should it have? What tank are you running? And whats the ballpark cost. Great work and thanks!
@PUTEMDOWNProductions 3 жыл бұрын
Mine has the original 12 gallon tank that is not removable. I think most of the older boats had the 6 gallon portable tanks usually 2 of them, one hooked to engine and one for backup
@maddax-4151 10 ай бұрын
Did you get new decals? if so where? Boat look great
@PUTEMDOWNProductions 10 ай бұрын
I did not get new decals
@blaze5000dgr 3 жыл бұрын
Did you install the lip edges around your boat were your lights are or did it come like that.
@PUTEMDOWNProductions 2 жыл бұрын
Came from factory with them
@rustyshackleford6206 Жыл бұрын
Is there any reason you didn't add storage at the front of the boat on either side of storage hatch you added? I have the same boat and I am considering doing that but am curious if there was some obstruction that made you not do it (so I don't run into the same issue). TIA
@PUTEMDOWNProductions Жыл бұрын
Rod locker on LH side you could add some shallow storage on the RH side but i didnt need anymore storage for my needs
@MrUben564 3 жыл бұрын
What are your thoughts on the foam in the bottom? I believe my foam is waterlogged and am going to be ripping it up this spring. Do I need to put in more foam? Are there downfalls to not putting in foam??
@PUTEMDOWNProductions 3 жыл бұрын
For safety i would put more foam in its place. The purpose of the foam is so your boat cant skink to the bottom, even if it gets swamped it will still float.
@garystumberg4232 Жыл бұрын
I also own a Pro-17 Tracker that I’m planning to update. I’m intrigued by your docking lights (headlights) at the front of your boat. I noticed a 2-pin flush mount connector in your list of add-ons that you used with the docking lights. What was the purpose of the connector? This was a great video that I plan to access as I am doing my work. Thanks!
@PUTEMDOWNProductions Жыл бұрын
I use the two pin connectors so i can quickly remove the docking lights
@garystumberg4232 Жыл бұрын
I also noticed you have a quick-connect base as well. Where did you find that component? I questioned Nilight and they indicated they 4:47 didn’t have one.😊
@PUTEMDOWNProductions Жыл бұрын
It is a camera tripod quick connect
Poly Holy Yow Spanish
Рет қаралды 28 МЛН
Lang Bros. 1907
Рет қаралды 10 М.