COMPLETE Switch Panel Breakdown and Customization {Jon Boat to Bass Boat Conversion} Lowe 1448

Рет қаралды 169,429

4 жыл бұрын

In this video I'll be going over the features and wiring of the BlueFire 6 Gang Rocker Switch Panel. This is a deep dive to help anyone curious about how to setup your switch panel. When you buy this switch panel it comes wired in a way that will drain your battery prematurely. I'll go over in detail step by step how to require you switch panel and spend more time on the water . You don't want to miss this. there are some important customization you could definitely benefit from.
As always thanks for supporting our channel. Enjoy this video.
If you missed any of the previous videos on this conversion, please click this link to get caught up.
*******FULL Jon Boat Conversion Playlist: • Jon Boat Conversion
Thanks to everyone whose been keeping up with this journey. I truly appreciate the support and comments from all of you. Tight lines and be safe out there.
Tap that like button and subscribe to our channel to stay up to date for future videos
Check us out on Instagram: / bass_brothers_fishing
Jon Boat Build Materials:
BlueFire 6 Gang Rocker Switch Panel: amzn.to/3tegF5I
Solder Seal 14 AWG Wire Connectors: amzn.to/2Ayl0KM
Shrink Tubing: amzn.to/37Hx6gz
Blue Sea Systems WeatherDeck SPST/On-Off Toggle Switch: amzn.to/3e441ON
Ancor Marine Grade 14 AWG Wire: amzn.to/2USyXtJ
Heat Gun: amzn.to/3fwUa4e
3M Marine Adhesive: amzn.to/2zEqkMc
Rod Grommets: www.boatoutfitters.com/rod-gr...
Rod Tubes (Front) 1 - 1/2 inch www.homedepot.com/p/JM-eagle-...
Rod Tubes (Rear) 1 - 1/4 inch www.homedepot.com/p/JM-eagle-...
Hole Saw (Front): amzn.to/2LyRkPv
Hole Saw (Rear): amzn.to/2zJMpsc
Hose Clamp: 1-3/4 in. - 2-3/4 in. Stainless-Steel Hose Clamp www.homedepot.com/p/Everbilt-...
Carpet Glue: www.lowes.com/pd/TEC-Skill-Se...
Foam used in My Boat: www.homedepot.com/p/Owens-Cor...
Arrow One Hand Rivet Gun: amzn.to/2xuOPtE
Harbor Freight Rivet Gun: www.harborfreight.com/swivel-...
Rivets Aluminum 1/8-Inch 100-Pack: amzn.to/2L7lg8Q
4-1/2 in. 4.3 Amp Angle Grinder: amzn.to/2UJDhup
DEWALT Cutting Wheel, General Purpose Metal Cutting, 4-1/2-Inch, 5-Pack: amzn.to/2JqJvdn
Swanson Tool T0701 12-Inch Speedlite Square Layout Tool (Structural Foam Plastic Orange): amzn.to/3h32NoV
Empire Level E2994 7-Inch High Definition Rafter Square: amzn.to/2JlcBLr
Empire Level e1190 16-Inch by 24-Inch Professional Framing Square, Blue or Black Anodized Aluminum: amzn.to/2vXsZhY
Ratcheting Bar Clamp 6 inch: www.harborfreight.com/6-in-ra...
Amazon affiliate links help to support the channel. You won't see a difference and it's the same products. Thanks for supporting our channel.
#jonboat #jonboatconversion #bassbrothersfishingdmv

Пікірлер: 284

@gregkallberg2025 3 жыл бұрын

Watched countless videos, then finally yours, you answered my questions, and showed just what I wanted to know. Best video out there for showing how to individualize switch panel!! Thanks

@BassBrothersFishingDMV 3 жыл бұрын

Awesome man 🤙🏾👍🏾

@kahunastev 9 ай бұрын

Thanks for walking us through on this. Looking at that jumble of wires doesn't look so intimidating now!

@Rob555ism 3 жыл бұрын

Finally finally I located this video which gives an excellent explanation of how to set this thing up. I tried repeatedly with nylite to download some kind of installation video. I could not even find a paper download. So I can't thank you enough. I can't thank you enough for this video

@65MK 4 жыл бұрын

Thanks for bringing us along. I like the detail you provide with what you're doing.

@BassBrothersFishingDMV 4 жыл бұрын

Thanks 65MK. Hopefully it helps others out there. I spent tons of hours researching everything so hopefully I can save others time on their builds.

@jaygalloway2798 3 жыл бұрын

Great video. Concise and well thought out. You told us what you were going to do and then showed us. Most wiring videos on KZfaq require wading thru minutes of useless information and then never show anything. You demo was very nicely presented and filmed. Thanks so much!

@BassBrothersFishingDMV 3 жыл бұрын

Thanks Suzanne. Appreciate the feedback. 👍🏾🤙🏾

@jackmoorhead2147 3 жыл бұрын

You did an excellent job of describing the switch panel and possible modifications needed. I think you have excellent ideas of use! Very helpful!

@BassBrothersFishingDMV 3 жыл бұрын

Thabks. Appreciate the feedback 🤙🏾👍🏾

@robertcao5694 10 ай бұрын

Awesome video, thanks for the simple and calm tone of voice in your video explanation. As a novice in electrical matters it is greatly appreciated when someone explains things in this manner. New Subscriber!

@ianyokoro8925 4 жыл бұрын

Man it's really becomig a trick jonboat! Thanks for always showing the details. Looking forward to seeing the full wiring video!👍💪

@BassBrothersFishingDMV 4 жыл бұрын

Thanks Ian. Appreciate the feedback. Next vid cuming soon.

@hootpelican1172 3 жыл бұрын

Wow! I just bought the exact same setup before I watched your video. Thank you so much for that. I just now rigged mine exactly how you did. My Pelican 10E is gonna work fantastic now. God bless you my friend.

@BassBrothersFishingDMV 3 жыл бұрын

That's awesome Hugh. I'm excited for you. Your Pelican is going to be sweet!!!🤙🏾👍🏾

@omega0835 Жыл бұрын

Excellent video for someone like me who is NOT an electrician. I have this exact switch box but with 5 gang. Your video helped me a lot! Thank you!

@BassBrothersFishingDMV Жыл бұрын

Awesome. 👍🏾👍🏾👍🏾

@ethkaz 4 жыл бұрын

You’re the man for actually showing us what you’re doing when wiring. Gonna copy your setup

@BassBrothersFishingDMV 4 жыл бұрын

Have at it bud. It's a nice setup and performing as expected. Good luck and enjoy.

@kenmccarthyfishing 3 жыл бұрын

You’ve made it super clear and easy,I had the whole switch panel with one main feed to the breaker which wouldn’t allow me to use each switch separately,thank you so much 👊👊

@BassBrothersFishingDMV 3 жыл бұрын

No problem. 👊🏾👍🏾🤙🏾

@TheEbikefisherman 2 жыл бұрын

Love your Vids! You do a great job with breaking things down for us commoners.

@BassBrothersFishingDMV 2 жыл бұрын

Thanks from one commoner to another👍🏾👍🏾👍🏾 😎

@macsmith2092 3 жыл бұрын

I don't know how I haven't come across your channel before. Awesome info. Thanks for sharing.

@BassBrothersFishingDMV 3 жыл бұрын

No prob. Thanks for watching.

@choimdachoim9491 2 жыл бұрын

...a little after 13:00...series, not parallel. I watched this a couple months ago and have been thinking about it. Tonight I'm watching it and it all finally is sinking into my brain, I sincerely thank you.

@BassBrothersFishingDMV 2 жыл бұрын

Awesome 👍🏾

@Hawaiibohntr Жыл бұрын

Good Info, I'm a Carpenter, I didn't know anything about this , but I have a bunch of knowledge now. And yes saved to bookmarks if I need a refresher.

@ralphfreeman255 3 жыл бұрын

Great job on the explanation and walking us through. Wiring always freaks me out and you taught well!

@BassBrothersFishingDMV 3 жыл бұрын

Thanks 🤙🏾👍🏾

@russmcelreath5623 3 жыл бұрын

Great explanation of I’m sure a very common rewire issue...Your techniques and use of fasteners was excellent.. Thanks and good fishing...👍

@BassBrothersFishingDMV 3 жыл бұрын

Thanks Russ!!!

@texstar77 3 жыл бұрын

I got the same 3 switch set up for my kayak and since my cordless battery died while putting holes in my boat, I turned on YT...... Sooo glad I found your channel. Well done information sir! Answered many questions I had! Subscribed and bell ringing!!

@BassBrothersFishingDMV 3 жыл бұрын

Thanks for subbing. Glad you like the video.

@CmdrRedGoose 3 жыл бұрын

Greatly detailed video, thank you. I purchased the same type of rocker switch panel for my sailboat and I was also wondering about the constant battery drain because of the lighting on the panel. Just about to fix that now, thank you again.

@BassBrothersFishingDMV 3 жыл бұрын

🤙🏾👍🏾

@omega0835 10 ай бұрын

Awesome video that helps me out a lot! You explaining everything in detail and keeping it simple made this build easy to follow. Much appreciated.

@BassBrothersFishingDMV 10 ай бұрын

Awesome. Glad it helped.

@atlcubsfan Жыл бұрын

Great info. Thanks for your detailed explanations. Makes perfect sense

@ilyassaloom1326 3 жыл бұрын

Thanks for such a thoughtful and thorough post. An appreciated public service

@BassBrothersFishingDMV 3 жыл бұрын

Thanks Llyas. Appreciate you 👊🏾🤙🏾

@blacklung06 2 жыл бұрын

Finally, found what I needed to finish my build. Thank you!!!

@BassBrothersFishingDMV 2 жыл бұрын

Awesome 👍🏾🤙🏾

@JustinK-vg8ob 2 жыл бұрын

Thanks for making this. I've been looking at getting this panel for my 1650 jet boat.

@BassBrothersFishingDMV 2 жыл бұрын

Awesome

@kejung1 4 жыл бұрын

Excellent explanation of the switch. Many thanks

@BassBrothersFishingDMV 4 жыл бұрын

Thanks Karl. Trying to bring as much detail and insight as possible.

@peterhoskin1803 Жыл бұрын

Thanks, that was a great help. Now I am confident to customise the wiring on my 8 gang rocker panel and 12 block fuse box.

@BassBrothersFishingDMV Жыл бұрын

Awesome 👍🏾

@botoepfer8588 3 жыл бұрын

Agree with others very good video.. I am building a skiff for myself and I am going to add lighting for my hatches and the switch will activate when the hatch is opened !

@miked8227 Жыл бұрын

Dude you just layed out my project tomorrow, I have the same switch panel

@downwitakrowdy Жыл бұрын

This is top level boat wiring at it's finest. The products used are marine grade (not cheap junk) and will provide years of reliable and safe service. He is meticulous and methodical each step of the way, and everyone should take note of how this is done, because safety is imperative on water. I've witnessed first hand very unsafe and unreliable boat wiring techniques and corrected many hack jobs. I salute you sir for doing it the right way and taking the time to show others how it should be done. Thank you.

@BassBrothersFishingDMV Жыл бұрын

Thanks for your feedback. Appreciate it 👍🏾👍🏾👍🏾

@jacksonwhite4825 4 жыл бұрын

Great video brother! Very informative, look forward to the next ! Keep up the good work.

@BassBrothersFishingDMV 3 жыл бұрын

Sorry man. Just seeing this comment. Thanks for the feedback.

@pfmobius1970 Жыл бұрын

What a brilliant video! Thank you so much for being so very informative!!

@discoveringlockenest8420 2 жыл бұрын

Lots of good information! Thanks for sharing! 🤙

@BassBrothersFishingDMV 2 жыл бұрын

🤙🏾👍🏾

@BooksxRonin 3 жыл бұрын

I’ve been utilizing your videos for my salmon/steelhead boat. Thanks for the good info.

@BassBrothersFishingDMV 3 жыл бұрын

No problem. 🤙🏾👍🏾

@seanryan1016 2 жыл бұрын

Nice Job very well explained. Thank you!!!

@TN-Vols-Fan 3 жыл бұрын

I know that this is late, but thanks for another great video! Like I mentioned to you in another video, I'm in the planning process for my 16'X50" jon right now. I'm going to fish it as is this year and get an idea of how I want things. This was very helpful.

@BassBrothersFishingDMV 3 жыл бұрын

Thanks Steve. Never too late for positive feedback 😃🤙🏾👍🏾👊🏾

@tjchisholm8294 Жыл бұрын

Excellent Video!

@jeffford665 3 жыл бұрын

Best breakdown I've seen! Much thanks brother

@BassBrothersFishingDMV 3 жыл бұрын

Thanks. 👍🏾🤙🏾💯

@Rob555ism 3 жыл бұрын

I have one suggestion for future movies. In this movie I wish that you had used extra wire that was, say red and black, to connect to the back of the box so we could physically see what you were connecting. I think I have enough electrical knowledge to know what you did but you actually held the box with the switches directly in front of the camera and then somehow manipulated with your fingers to touch the leads or poles on the battery. It would be nice if we could actually see that being done. I don't know if you can do it or not but it would be cool to simply insert into your current video exactly what that would look like. That would probably help out a lot of us a great deal. Other than that it's just a great great video great video

@BassBrothersFishingDMV 2 жыл бұрын

Thanks for the suggestion. I'll use that going forward

@dansokyrka8803 3 жыл бұрын

Nice straight forward video without all the unnecessary explaining of stupid details we don't need. Thanks Good job!

@BassBrothersFishingDMV 3 жыл бұрын

Thanks for the feedback Dan. 🤙🏾👍🏾💯

@jamesC. 2 жыл бұрын

Great video and very thorough....excited to see more video's from you. Thanks

@BassBrothersFishingDMV 2 жыл бұрын

Thanks James. Enjoy the series

@andrewokerlund5689 3 жыл бұрын

I had a Chinese panel just like this and I was wondering how to make these changes! Your video is so well done thank you!

@BassBrothersFishingDMV 3 жыл бұрын

Thanks 👍🏾🤙🏾

@__Craig__ 3 жыл бұрын

Great ideas here. I did "stock wiring". Now I'm going to redo it

@BassBrothersFishingDMV 3 жыл бұрын

👍🏾🤙🏾

@thebowtiefisherman5718 2 жыл бұрын

Thank you for another great video. Stay Safe

@antoniopadilla8610 Жыл бұрын

by the way great video and explanation. I'm rewiring my boat and this is great info

@newsupnewsdown2467 2 жыл бұрын

Excellent video. Good quality workmanship. Thank you.

@BassBrothersFishingDMV 2 жыл бұрын

Thanks 🤙🏾👍🏾

@erlinmyer4185 2 жыл бұрын

Great video, step by step and easy.

@EdKunkelJr Жыл бұрын

Thank you for sharing this, very helpful!

@BassBrothersFishingDMV Жыл бұрын

👍🏾

@philjones4995 3 жыл бұрын

Awesome, just what I needed!

@BassBrothersFishingDMV 3 жыл бұрын

Awesome 🤙🏾👍🏾

@woodatwork6927 3 жыл бұрын

Was looking at and testing my identical rocker panel yesterday and wondering how I can separate them to not have the whole thing on one power source. Your video is perfect!! Since I won’t need all 6 switches, I’ll actually use the switch one as my on switch instead of an extra toggle. Thanks for a great video!

@BassBrothersFishingDMV 3 жыл бұрын

No problem. That's a great way to go if you don't need all the switches. Thanks for watching!!!

@richardallain6277 4 жыл бұрын

Great video my friend. I’ve enjoyed all of them but this was very well explained and demonstrated. Also, you could wire up one of the switches on the gang panel to turn on the switch lights and voltmeter if you have one open. Looking forward to the next one!

@BassBrothersFishingDMV 4 жыл бұрын

Thabks Richard. Good point. I'm saving my last open switch for courtesy lights which prob wouldn't be 2021 addition. I guess I could have used the open slot in the meantime.

@247sikvideo 3 ай бұрын

Nice video. I have a similar panel and this video gave me some great ideas. I like the separate switch for the voltmeter and bottom led. Nice. Thank you

@wesmccormick2249 3 жыл бұрын

Great explanation! Thank you for making this vid

@BassBrothersFishingDMV 3 жыл бұрын

No problem. 🤙🏾👍🏾

@chrisatloafercreek4364 Жыл бұрын

GREAT VID

@jjohnston6645 2 жыл бұрын

I have that same panel and making adjustments myself, pretty easy to modify

@kingfish3066 3 жыл бұрын

Alright man I learned something, thanks for your help , well explained process.

@BassBrothersFishingDMV 3 жыл бұрын

All good. Glad you like the video.

@robwooly 2 жыл бұрын

mate I saw your video just in time which is save me so much trouble thank you very much for sharing I needed to see this video cos I was buggered before I saw this video

@fishingwithjett5373 4 жыл бұрын

Great stuff!

@BassBrothersFishingDMV 3 жыл бұрын

Thanks my friend. 🤙🏾👍🏾

@mattmarkley3364 Жыл бұрын

Thank You!!! Thank You!!! Thank You!!! You just saved me an entire day of pulling my hair out troubleshooting this issue!

@rb664 2 жыл бұрын

Thank you for the clear instructions.

@BassBrothersFishingDMV 2 жыл бұрын

🤙🏾👍🏾

@mr.mikesullivan3685 2 жыл бұрын

Great videos! I got some good tips from you! I’ll be re wiring a 1993 Skeeter I just bought in a few weeks!

@BassBrothersFishingDMV 2 жыл бұрын

Awesome man. Good luck.

@irishmike519 3 жыл бұрын

Nicely done! Well explained!

@BassBrothersFishingDMV 3 жыл бұрын

Thanks 🤙🏾👍🏾

@bosshogg55 3 жыл бұрын

Thanks buddy from the UK.

@BassBrothersFishingDMV 3 жыл бұрын

Thanks for watching. 👍🏾

@danemmerich6775 3 жыл бұрын

Very nice job explaining!

@BassBrothersFishingDMV 3 жыл бұрын

Thanks 🤙🏾👍🏾

@MrSlimbullfrog 3 жыл бұрын

Great video! Thank you!!!

@BassBrothersFishingDMV 3 жыл бұрын

Thanks for watching!!!

@stevefine1704 3 жыл бұрын

I have the same set up on my boat and I hooked up my Nav lights to the same toggle switch and all the little blue LEDs and Nav lights up together at night. My problem is too many fuses to deal with. Great video.

@BassBrothersFishingDMV 3 жыл бұрын

Thanks

@jesus3901 2 жыл бұрын

Great explanation.Thanks

@BassBrothersFishingDMV 2 жыл бұрын

👍🏾

@bobstaples7147 7 ай бұрын

Thank you so much.

@strikemaster1 11 ай бұрын

Awesome demo and love the whey you took some time to explain your intentions.... this makes it so much easier to follow. Well done. Could you simply leave the blue and yellow wires disconnected which would leave the lights permanently off?

@MarkFugel 2 жыл бұрын

nice job...thanks for sharing

@stevebuck4966 2 жыл бұрын

Thanks man, I got a Thunder jet and have not really been happy with the way the toggle board was set up. But every time I crawl under the dash it's just a mess and makes me think it's too much. Your methodology and the connectors will be helpful.

@BassBrothersFishingDMV 2 жыл бұрын

Awesome 👍🏾 🤙🏾

@johneasler9967 2 жыл бұрын

Excellent, Thank you

@BassBrothersFishingDMV 2 жыл бұрын

No prob!!!

@reese4441 3 жыл бұрын

Thanks!

@that_crankytf9571 3 жыл бұрын

All to save draining your battery when not using it install a isolator to turn off all battery power when not in use which is what i will be doing, Great video btw.

@BassBrothersFishingDMV 3 жыл бұрын

Thanks. I'll check it out.

@amals51 4 жыл бұрын

Nice work! I’m hoping to get an invite to go fishing once you’ve got her all wrapped up and ready! Lol... but seriously, she’s going to be nice when she’s done!

@BassBrothersFishingDMV 4 жыл бұрын

Thanks Andrew. Ca'nt wait. I can see the light at the end of the tunnel. 🙂🎣🎣🐟🐟

@GeorgeEspinosa 3 жыл бұрын

Awesome!!

@BassBrothersFishingDMV 3 жыл бұрын

Thanks

@Teddy_Vilardi 6 ай бұрын

Thanks

@davidcobb4527 Жыл бұрын

Hey BBF, great video. Can you do a video on the use of relays, breakers, shut off switches and fuse panel. Basically the whole enchilada and how they work and where you’ld place them on your boat. Appreciate it and looking forward to rewiring my boat!!

@arcticcatkickass 3 жыл бұрын

That was mint

@joerule7179 2 жыл бұрын

You do a fantastic job explaining how to do things. How do you hook up a switch?

@donfoley9732 3 жыл бұрын

great vidio

@BassBrothersFishingDMV 3 жыл бұрын

Thanks

@ryancheshire9603 3 жыл бұрын

Thanks! Great video. What about wiring the lower LEDs to the navigation light switch? That way if you’re using your lights at night you illuminate the switch panel lights as well

@BassBrothersFishingDMV 3 жыл бұрын

That's a good option. I think I'll try that out on my next build.

@JohnDEEREgreeN1445 2 жыл бұрын

You could just run the voltage meter and the switch lights to ignition on. Then when you have your key “on” the lights and meter will turn on

@rancidrandall 3 жыл бұрын

Great video. Could two of the switches be replaced with on/off/on switches for use with power anchors?

@NanoLpZ8599 2 жыл бұрын

Is there a video where you hook up the negative and positive connection to the switch panel to the fuse box?

@corkyvanderhaven3391 2 жыл бұрын

Good idea Thx for the video My boat I got is 900 don’t want my buttons to cost more than the boat But, ya know who you gotta have switches for…..⚡️😜

@BassBrothersFishingDMV 2 жыл бұрын

Lol right. 👍🏾👍🏾👍🏾

@user-qo7qc5em5t 3 жыл бұрын

Having the ability to turn them off is nice, but those little leds barely draw any power. No real power drain would occur for those who are worried about that.

@choimdachoim9491 Жыл бұрын

Around 10:05...don't heat-shrink both ends before you melt the solder...that will lock an air-bubble in the middle which prevents the heat-shrink from shrinking down against the soldered connections. Also, the first connectors you used can be heat-shrink instead of just clamping. I still add another heat-shrink in exterior applications but it's not necessary. I get mine from Amazon. Over the past year (14 months since I bought my first boat...a 30 year old wellkraft cuddy) I've watched dozens of KZfaq videos on boat wiring but you video is the only one I haven't removed from my "Watch Later" list. I'm adding, so far, 20 switches as I completely replace every wire and electrical thingie on the boat.

@BassBrothersFishingDMV Жыл бұрын

Awesome man. Sounds like a cool project. Thanks for the tip

@OldExodus 9 ай бұрын

Great tutorial on how to wire the panel How do they label the rocker switch labels?

@BassBrothersFishingDMV 9 ай бұрын

Label maker. Also, some switch panels come with pre-made labels but they're typically not that good.

@pfmobius1970 Жыл бұрын

I was thinking since i dont need all six rockers maybe i could use one of them to power the meter and the lower LED sited of buying an extra switch. Or i could just add more stuff to the panel. Lol

@crazy1kid2 2 жыл бұрын

Awesome content!! Couldn't you use that second toggle switch as the overall "Master power switch" that way the LEDS and voltage meter are only running when the "Master power switch" is on which would likely be only when the boat is being used and when the boat is not being used you can turn that switch off and nothing would be getting power and then there would be no power draining the battery I am thinking about doing that for my boat and curious if that would workout? Also could you rig it up so one of those switches in the panel is the "Master power switch"?

@BassBrothersFishingDMV 2 жыл бұрын

The Master Power Switch fullfils the need to be able to control power being drained only when the boat is in use. Now that I've used the control panel and boat for over a year now, I've experienced that the voltage meter and lower LEDs really don't drain the battery to the point where you need the toggle switch. To keep things simple I would just leave it out of the build. It's more of a good to have. Not really a necessity

@true2dallas 3 жыл бұрын

Have a picture of what it should look like once it’s all hooked up?

@Papalegba22 Жыл бұрын

Just get power from acc for back light. That way it's only illuminated when your driving or acc forward.

@ChrisBusinsky 3 жыл бұрын

Thanks for this great set of videos. I can’t seem to find a video on your Battery charger setup. Am I missing something, or the link to which one you chose. Thanks again, just starting our build.

@BassBrothersFishingDMV 3 жыл бұрын

That's awesome here is a link tot eh on-board charger I chose for my boat amzn.to/3hJIKN0 Let me know if you have any installation questions and I'll try to help you out.

@ChrisBusinsky 3 жыл бұрын

@@BassBrothersFishingDMV one more question. If I have 3 batteries. 2 in tandem, should I wire each bank to each battery separately or just wire one to one battery and the second bank to the paralleled batteries NOT using the 3 bank on the charger? Just trying to figure out what set up to get. Sorry. I looked at their site but couldn’t find the answer.

@BassBrothersFishingDMV 3 жыл бұрын

@@ChrisBusinsky Good question. wire each battery separately. So if you have 3 batteries buy a 3 bank charger. It doesn't matter if two of the batteries are wired parallel.

@ChrisBusinsky 3 жыл бұрын

@@BassBrothersFishingDMV Since you've been so helpful, I have another question. I have 2, 1" holes from where I took out the livewell lines. What would be the best way to plug those. I was thinking a new threw plug, but there are so many and I'm afraid one might come out while we were fishing. Just wanted to get your opinion and if you have a favorite thru plug you've use let me know. Really appreciate the help!

@Nizz8daGrizz8 8 ай бұрын

For my rig I don't have an accessories switch. I was thinking those purple communication wire to wake up.. maybensent the ground to ground and send the power for that to a switch. So basically would it make the first switch my master switch

@anglerandy5736 3 жыл бұрын

I have one nilight brand but it doesn't have a yellow wire equivalent and I only have a constant 12v power source other than my trigger wire for my amp. I don't want to use that and if I use the cigarette lighter wire don't I need a relay? Also where would I connect a trigger wire?

@randelmalavida 3 жыл бұрын

Damn you're good!!! I'm like, " Sshhh!!! Everybody shut the hell up!!! The man knows his ship. What~ cut~ pull~ Wait!!! Rewind that.. Switch~ to the what??? Oh damn~ Play it again, he's a genius!!!" Thank You!!!

@cary484 2 жыл бұрын

Should've made solid butt connector to 1st red wire loom thats goin to on switch for permanent power. Less quick connects you have, less issues you have to worry bout with coming apart, corrosion & rubbing. Especially when its goin to be tight area where many other wires goin to be. Just lil share from one thats been there & 40yrs of mechanical commercial exp..👍

@jdiez6830 2 жыл бұрын

Great video, I just got one of those with 8 switches, if I connect the blue wire to one of the positives in one switch (like powering a device, black to the battery and red to the switch), will that switch will control the leds? Thanks.

@crazy1kid2 2 жыл бұрын

Have that same question, did you try it out?