Рет қаралды 160,397
Finish machining of the special fixture for the Mazak Integrex. I show in this video the real life in the machine shop. Its not just all fancy tools and everything is ready to just push the start and let it run. To make one part you never have the tool in the changer you want. You have to set new tools.
Note !!!!!! In the video I saw and called out some numbers wrong. The distance with the Haimer probe to the centerline on the center, That should have been 1.2475 but actually read 1.2457 with the probe. I reversed the 5 & 7. This caused a error of .0018" to high (fortunately). I have gone back and shaved off the .0018" to the proper depth. I didn't realize this till I reviewed the video clips.