Clear, concise and informative video. Thank you

This makes a lot of sense to me, thanks !!

great vidieo learned alot thanks..

Thank you for your information

Powerful information

Nice1 !!! Thanks

Very good information! Thank you

That was nicely a nicely packaged lesson everyone with home air should see.

This is very important for me because l want less leaks leaks on the equipment I use.

It's it okey to use compressor for long distance pipe around 1000km.What is the difference if long pipe and short for Air pressure?

what I got from this video was he was selling the automatic drain.

Can you provide a diagram of the loop system he highly recommends? It is hard to understand what needs to be looped and how it would look like??

Definately agree with adding a regulator coming out of the tank but I would put a filter (water separator) before it to keep water and contaminates out of the regulator. Thanks for the video.

Connected as a loop systems, as suggested, negates the ability to put the loop down stream. There is no down stream since air is flowing into the loop from both directions as stated. What did I miss?

will I have seen small workshops using pvc pipes in an air system of 10bar pressure

I did this and I feel I lost pressure. Ok,coming out of the tank I had to use a reducer from 1/2" to 3/8" cause I could not find a 1/2" flexible hose to go from the tank to this loop. So I end up going to Harbor freight and buying a 3/8" x 6' long hose to connect to the loop from the tank. Then connected the air filter from Northen tools 3/8 inlet and 3/8 outlet to the loop,I have no leaks and feels like I have lost pressure. My question is ; Coming from the tank with a reducer of 3/8 into 1/2" pipes would it make loose pressure?? Thanks. ;0)

انا احب العمل فى انظمه الهواء فى مصر

Why the water formed in the compressed air pipes?

Had pvc shop air supply for over a decade now 150 psi no issues at all I’ve see videos of tests where they drop a 50 lb steel ball from 12 feet onto a schedule 40 pipe pressurized at 140 psi and nothing happened..... sounds like ppl have had bad experiences but not me....

Why did you say never use PVC pipe I am about to get a 60 gallon Air compressor so I have been to a lot of shops looking at how there air lines are ran and about 80% of them are using schedule 40 PVC

What is "black"?

this is WAY out of my league, a homeowner garage compressor doesn't need all of this lol

this guy has shares in a pipe production facility.

talks like Cleveland

that Tsunami air compressors looks mean