FINALLY someone who I understood step by step. Thank you

I learned more from these tips than I've learned from multiple videos I've watched. Thank you!

Please do more Lightburn video's....this one was great. You are awesome at explaining things. Thank you for going slow, some other people just go so fast and click so fast before I can see what's going on and follow.

Like many others I've watched lots of tutorial videos to try and get to grips with my Atomstack laser. I have to say this was by far the most informative of them all, well done and thank you.

This has been the BEST video I have watched on Lightburn so far. Your simple explanations make it easy to understand and comprehend exactly what you are explaining. I can't wait to watch your other videos and see what you have planned for the future! Thank you so much.

Great video for beginners!! Really appreciate it! Moving from Inkscape/Glowforge to a much bigger machine with lightburn and this bridged a huge learning gap for me!!

Oh thanks a million, you solved a big problem I’ve had!👌🏼👏🏼it was so difficult to solve as I didn’t know what to do a search for. Tip number 8, where instead of outlining the object, I can outline my design. So appreciate this & each video you make. You are so down to earth & talk in basic language making everything so understandable. Kind regards, Denise in Australia 🇦🇺 😊

Love your videos. Each one has clear, uncomplicated instructions for each step. One of the best Laser/Lightburn channels I’ve watched (and I’ve watched plenty!) Look forward to more.

EXACTLY what I needed. Thank you. I like when the presentation is made by an old guy. Because that tells me that you had to feel the same pain like I feel. Don't be offended, I am ~10 years older than you 😉. Again, thank you....Bernd

Thanks so much I'm 50 and I just bought my first laser nova 63. Your videos are super helpful geared for the everyday guy. I thank you

I just found your channel today! I received a xTool D1 for Christmas and have been having a lot of fun with it. I am also new to Lightburn and your videos have really been helping me out! Thank you, thank you, thank you!!!

You're awesome! Seriously! Thank you so very much for doing all of these videos! I still have months until my laser arrives...but I'm trying to use this time and take all of this stuff in so I can get rollin' right away! Again...THANK YOU!!!!

This is just what I've been looking for. New to Lightburn.....So Thank You very much! Jim

As a new laser user, I find more information on your channel than all of the other post put together. Thank you!

I'm new to laser cutting and Lightburn. My Mira9 is on order and won't be here for awhile, but I'm trying to learn and familiarize myself with the software. I think this was a great video! Even though I haven't had an opportunity to use it, this video has made it not so intimidating already! Can't wait to watch the others. Thank you so much for your time!

Young man . I want to thank you . Ive been oulling my hair out trying to learn this stuff . Watching lits of videos and even the instructions baffles me . Ive always had a bad learning curve and have had a great time in life gettingvit all half right . . I got nowhere with sll 8f them . You just clearly taught me this stuff to get me started . Half way though i already had text and photos in the work area and editing thank you so much . Now if I could just get the program to talk to my laser I need a newer computer.

AS a new beginner, I'm enjoying the simple way you explain things. You are awesome Thanks

Thank you so much. Brand new to lasers. Love all your videos! Would love to see more!

Thank you from the bottom of my heart ❤️ when I opened up light burn it was I bit intimidating now just watching this video I feel more confident

What a great help that was!! I will be watching it several more times. This really helped to fill in a lot of blanks. THANK YOU!

I literally just got lightburn and ordered my ts3 laser, only used the wainlux k6 but that was super basic with only 3 settings. Thanks for teaching!

You are a great teacher! I first downloaded Lightburn and thought I'd never be able to figure it out, but with your simple explanations you just might be able to teach an old lady some new tricks...keep the videos coming!

Excellent instructional presentation. I learned more in this presentation than I have from many others. Thanks, I will seek out your other tutorials.

THANK YOU! I know it has been awhile since you posted this, but I just got my XTool D1 and I have been struggling with positioning my material. Your video cleared all the fog! Keep up the great work!

Hey, I've been watching your videos and this one is really helpful , thank you so very much. Being very new to and actually my very first time using any graphic designer tool, I am very appreciative of all you do for us newbies.

Thank you!!! 🙏🙏 By far one of the most useful videos I've ever found here or anywhere. You've saved me a lot of frustration.

Great, great video and tips. New to this laser stuff and waiting for my machine to come. Will download light burn and have it ready to go!

Excellent video. Helped me get up to speed much more quickly with right level of tell us and then show us. Video pacing was just right and I really enjoyed working along in lightburn. Thanks. John Z

Incredible information! We thought we had Lightburn down, but this brings us up to another level!

Just got my laser and this video was amazing. All the tips were exactly what I needed.

Liked and shared. These tips are priceless for those of us that are just beginning.

An excellent tutorial on LightBurn! Thank you for putting this together. It is appreciated very much. I am glad I found your channel!

Hi i am new to this, and at the age of 62, I give it a go I have a ortur laser master 2 , it’s only a small laser, and lightburn software, I am dyslexia, and I have looked on lots of videos of lightburn, ,which is hard to follow, but know I have found your videos on lightburn , it’s starting to make sense, a big thankyou to you for your time and skill ,Neil

Great in-depth tutorial sir!!!! My questions have been answered.

Best Training for sure! I'm so impressed Robert! Thx for your time and expertise - and the easy teaching style!

Thank you for all this information. You do not know how you have been a life savior to us newbies in the world of laser

Fantastic tutorial!!! One of the best! I want going to try lightburn, but now I will. You are a wonderful teacher

This video was very helpful and starting to learn Lighburn on my new laser. Enjoy your new sub; looking forward to watching more of your very informative videos. Continued successes to you!

That was a great video. Thanks for those tips. They will make my early weeks of laser engraving much easier.

Just got LightBurn ... and was semi clueless ............ you have really helped me out !!! Thanks .. I'll be watching all of yours.

Thank you so much Sir. I got my laser today and you ve given me a life long lesson

Just bought a used Atomstack P7 and this was really useful in getting to know some settings. Will be watching through other videos. 👍

Glad I found this video. Answered a few questions I had about basic LightBurn functions. 👍

Really found some good info on this video. I am now a subscriber, going to check out all your other videos, they're just what I need. Many thanks for your efforts.

Thank you so much for your super user friendly video. Brand new to laser (just got mine set up tonight). Looking forward to more. I use a silhouette cameo and the software for that is very similar to this so thank goodness it wasn’t all gibberish ☺️. Very easy to learn from ya, thank you!

Awesome , never knew how to change power on the fly using the controller , I would always change it in Lightburn and resend the file , great tips , thank you for all your hard work making these videos to benefits others 👍

What a Guy Pure natural teacher Will be back on a regular basis Thanks very much

Fantastic video, took me a while to find a video with these type of instructions, how to use my laser to send a design for the very first time!

Love the way you presented this. Liked and subscribed.

Learnt a lot on your channel. wish I would have used this as the very first Lightburn tutorial . thank you very much. new subscriber for sure

You are a wonderful teacher!! Thank you for taking time out to record these videos. MUCH appreciated!! ~Pam

Thank you so much for spending the time on this video I have basic computer skills and this is so informative. I sincerely appreciate it!

This was super helpful. Looking forward to my Longer Ray5 arriving tomorrow

Great tips for Lightburn, Thank you!

Thanks for teaching so that I understand. I have learned more watching this one video then I did watching 10 of someone else’s. Please continue to teach I’m a subscriber

Excellent tutorial 😊

Thanks for the tip about the notes, that one I didn't know. A counter opinion about making adjustments at the controller. I try not to make any adjustments at the controller unless I have to because the membrane switches on the controller have a very finite lifespan. Once one of the membranes breaks, that button will stop working and they cannot be repaired only replaced. Since these membrane switches mount directly to the main PC board in the controller, if any moisture gets through a cracked membrane your controller is not long for the world. Your computer mouse is much easier and cheaper to replace.

Although I have a diode laser, without an onboard controller, your tour through LightBurn was very helpful. Thanks!

GREAT JOB, VERY INFORMATIVE, GREAT FOR ANYONE NEW TO LASERS

Great video, well explained, very useful. Well done.

This is really helpful. Thank you!

excellent video and very helpful. thanks so much for taking the time to share your knowledge.

Thanks for the good direction yur video is easy to follow and for a new laser and lightburn user I appreciate your instruction.

This is an awesome training for newbies. Thank you so very much for doing this video. I give you 💯 and subscribed to your channel

Frame speed is so good to know, it was too fast that I used to frame it to many times until I thought I was right. Thank you

Totally satisfied, you are a great teacher, explained so briefly , superb BOSS

BEST VIDEO. I learned so much.. thank you so much!!

Sometimes I feel so stupid. You're still the best. Thanks ..... Nat

I’m just starting out - this is soooo helpful - thank you.

Outstanding videos - I am brand new and have learned more from your videos than any other....Thank you !

thank you for this video, I am just looking into which laser i am going to buy and this video will be so helpful and looking forward to more.

Very nicely done, learned a couple things. Didn't know what the T colors represented when they were added, and the big one for me was being able to drag the screen around. Been using the scroll wheel to zoom in and out, especially using the editing tool, but the lack of pan bars drove me nuts. One thing about changing the settings of the colors, something I found that can be done if you wish to keep default on start up, but want to change a few for a specific job. Open TWO lightburn sessions, work in one where you make all your changes, and when done, close it first. When you close the second LB window, all the default settings will be saved. This way if you have them all laid out for average jobs, and you need to modify one for just one particular job, you can without disrupting the normal levels and names. What I like about Lightburn is that you can run multiple windows at once, though only the first controls the laser, it allows you to import an SVG or DFX with multiple parts, and you can cut out individual parts, work on them in another window, and save them as single parts. I do a lot of RC airplane parts and this is very helpful for me. If I want to test cut the parts, I import into the second LB window and cut them from there so I can cut from the primary window. I just with is had a dimensioning tool for those angled slots, so the proper degree can be made.

Loving that framing speed tip!!!!

Awesome great video! Thank you

amazing tips. thank you.

I've wondered about all the icons on the bottom. I'm glad I'll be able to rename and input the Spd/Pwr. That alone was worth watching the entire video. 😁

Thank you finally someone that knows how to TEACH . I don't have to go get the book laser for dummies. Thank you I need to figure out how to send you a gift much appreciated. I am very new to this game of of Lasering.

Excellent tutorial . It was just what I needed.

Best tutorial I’ve ever seen for the lightburn sofar👍🏻👍🏻👍🏻👍🏻👍🏻

Congratulations on your 1000 subs! 🙌🏼🙌🏼🙌🏼

Love your tutorials

Very helpful...Thanks !

Thank you very much for detail video

Awesome video thank you

Mate what a great video, i know it’s a couple of years old but thank you for the way you explain things. As a new user this is so valuable as it is easy to understand. Many thanks. Nb have you done any updates on this with most recent versions of lightburn

Thanks for the vid!

Super helpful - thx!

Thank you for the this great video!

great video. Thanks

Thank you , You are helping me lot with this video.

Great video sir.

I love that you start with ‘thank for stopping by’. That’s spectacular. You’re a righteous dude!

Well done. Thank you.

Thank you for this video... It was a great help

Great video, thanks!

What a great video!!

I needed this video..before totally being a noob last night .my lettering was even mirrored somehow

amazing video thank you a lot

Thank you very much SIR , your tutorials are Amazing .

Great info. I learned a few things. Do you have any easy way to square a piece up perfectly? So far I used a straight edge, then used the beam and taped down some painters tape.