Thank you very much. I have this same Hilti and it needs an overhaul. I have used Hiltis over 50 yrs and have always wondered why it is so effective and now I know it. The piston system is real mechanical marvel. But why didn't you use oil at all when putting it back. You should always use tiny amount of oil to prevent wearing.

Did anyone else need the loo a few minutes in due to the rain lol 😂 great result mate really enjoyed it great restoration

The first drill Hilti restoration i see on KZfaq. It's great!

I really appreciate that you don't paint the tools a tacky color with spray paint and that you keep the original color. Good restoration.

It's pretty amazing that you remembered where every part fits,you sir have my admiration

that little piston is so cute, looks like a mechanic's keychain

I have this drill from 1977. It's a great machine and works perfectly

Beautiful restoration, beautiful work.

Now that's super, another drill restored .

Thank you for sharing your experience. Like.

Nice job, also flashbacks to my apprenticeship seeing one of these old TE's.

Now that was pleasing to watch great job man👌

Don't reveal the finished product at the beginning of the video.

Great work my friend! Hilti makes some great tools, and you brought this one back to life!! I just restored an old electric hammer from the 1930's, but also showed and demonstrated newer ones... Do you mind if I include a link to your video in my restoration video description? Hopefully it'll bring more views to your video, and people can see a newer concrete hammer being restored!

Truly amazing work of restoration 👏🏻👏🏻

I love Hiliti. The best tool!

Why would you put the finished product at the beginning of the video? Leave us wondering, man!

Fantastic, thank you 👌👍👏👏👏👏😍

Nice videos man ,you are great !

Hi Gear Show 👋👋👋very good restoration hammer drill 👍👍👍it is instructive to watch your videos 🤝🤝🤝

I'm impressed with the restoration, but more so that you remembered how to put it all back together! Great video.

Some times with "plastic" cased tools like this, you can use a heat gun to heat up the plastic to bring back the color and remove any brushed/scoffed areas. Don't know if that type case would work with that option, but could try and see. Thumbs Up!

Я понял зачем он снимает видео - чтобы не забыть как собирать это всё обратно :))))

凄く器用ですね。

Great resto ! Just never forget these tools need lots of oil and grease ! 35cc of oil in the gear box and lots of high temp gear grease on the other moving parts. The right type of oil and grease is crucial since these types of drills are under a great deal of stress and can get very hot. I have used Hiltis for years. I know them well.

What kind of finish did you „spray“ on the red housing, after sanding it?

Good restoration 👍 I like it

Болшой спасибо

Hilti gear is the best, use it all day long 😎

SUPER.SUPER.. VERY VERY..THANKS...

Nicely restored my friend 👍

Many thanks, I have The same one and I didn't know It need oil. I will watch this video some times more to see if I can restore mine, well I'll try at least oil it.

Tu es le meilleur !!!

nice cleaning

I always waiting your new video

Exelente.

those used bearings looks like new :)

Funtastic,,👍👍👍

Great job! Thank you for not having ear bleeding background music.

대단하다 와우~👍🇰🇷👄

What type of liquid and sand paper you have used for sanding plastic red color cover? and what you sprayed on it for shining?

懐かし物を、見させてもらいました。

Nice job sir

Always a pleasure to see your video, I get to learn something and I like your neatness in your work, please keep posting more.

What do you use to remove the old grease from the tools? What cleaning solution you use?

Nice work

Great job! I saw oil being poured-well done, but where is the grease on parts that are subject to friction?

Cool

GREASE!!!!!!

Nice hammer drill old Hilti 1990?

Hilti is the king...

What oil did you use? Love your videos but I wish you would provide more details like that.

Hey this was an easy disassably, washinga und assembling the tool. You used no new sparaparts. Minimum, all the o-rings and the brake (3pcs) have to be replaced. The clutch has to be messured and replaced otherwise you will get a capital defect in the gear afterwards ( in the next 14 days at the construction site) You won't be able to drill tiles in the bathroom because you will always have the beat from the percussion piston. I repaired this tool in germany about 7 years at the HILTI repaircenter in Bebra. We would be fired if we would repair this tool in this way you did. :-)

How do you know how to disassemble these machines? Do you go by some plans or something?

Our hammer drill at work looks like that after the first 3 uses lol

Давай, железной щеткой ещё по обмоткам задень, вообще хорошо будет.

you do not go up the device with grease at the gear and piston?

you didnt use any lubricant when putting it together? which gear oil did you use?

Question 1: Is That The Makita Impact Driver That You’ve Restored? Question 2: Does Cambodia (The Country You Live In) Supply 100 Volts Or 230/240 Volts AC?

Nice Job You are tool Master amiguito.

How you did restor the Hilti shell ??? What spary you did use ??

you have any videos of a te17 front seal being changed ?

Where do you buy this beautiful object

Good restoration.　thank you for sharing！

You have done a great overhaul👍👩‍🔧

Good job. Doesn't work anymore matter. Your restoration any kind machine. You always make it work. This Comments For You !!! 🥂🍻🍺🍸🥃👍👌😊. l Hope you get hit 300k subscribe

2:45 - I like how that impact driver sneezes those screws out.

In Hungary HILTI stands for concrete drill.

What dis you use after sanding the shell of the hammer drill please answer me 😭

Does that oil grease the gears. Such a compicated drill. Seams a drill like this could be simplified with less parts. Like what engineer thought of this. This needs a spring here and shaft here a sleeve here a pin here an O ring here. Another pin a ball bearing. So many parts for drill.

Supper

Che vernice hai usato che non ha rovinato il martello?

good

Xin chào! Bạn ở VN phải không?

Nice restoration, great work.

Not replaced the o'rings, bearings? Greetings from Brazil.

Yo tengo que restaurar un T17

can anyone tell me how to remove the drill bit in the keyless chuck i got the same model came from ny grandfather thanks

You have that tool on sell ?

Amigo eres una deidad.

I have the same drill and it's missing one part that he is putting in last at 19:22. Is it just a dust cap or does it have bigger purpose? Is the drill still usable without the part?

You should send some of these refurbished tools to BOLTR AVE for testing and review, he’s a fellow KZfaqr

How long did this take? Just curious, and don't say 20:16.

Hello, I am restoring a Bosch drill, but I can't find this part that you also have on your HILTI, (the filter) 44 - SUPPRESSION FILTER BSD-1617328002.A71 1617328002, I don't know what this part is for...

Can anyone tell me when the TE24 was made ?

Don't want lubricating grease or lubricant?

Wish you wouldn't show the "After" till the end of the vid.

Hi sir. I'm from India after all hard work behind the great restorations done which brand of power tools do you suggest the best.

Прекрасно. Но надо иметь очень Большие нерви.

👍😎🍜🔧🔨

great stufff but only pakistans completly take care of stators starters id like to see thoze rebuilt

No have spare parts for these models , be careful with some tiny details 👍

I didn't like so much the intro music and after-restoration images. I prefer only pre-restoration photos of the tools and no music as the previous videos. In any case your restorations are more than excellent and professional in your channel which I undoughtly wait with impatience to watch!

A bit strange, waxed and polished plastic cover, but uses the same old connection cable. On such a machine it is the one who has the greatest risk of being injured. And that can be dangerous too.

Подшипники менять надо, он их обратно устанавливает.

It kind of hurts to see you reassembling this nice machine without any grease on the metal parts, without new bearings and o-rings and without heating the housing of the bearings to get them in without force or with the corroded cable shoes of the old brushes…. the look of the machine after restoration is very good but it's probybly unusable like this or would work only a short time... it could be a perfect restoration but in this way it only Looks good :(

Nice to see you finally restore a high quality electric tool rather than the usual crap

Amazing how the field pack mysteriously turned 180° all by itself so the wires were facing towards the rear... But apart from that... OK...🇬🇧👍

Hilti TE 24 restoration

Can anyone tell it's manufacturing date.