Рет қаралды 4,011
Easy and fast concrete moisture testing for the installer to perform at the time of the flooring installation. (Chapters at the end of the description).
Even if pre-installation moisture testing has been performed, conditions can change that will affect your installation of flooring or coatings. By implementing this easy Installation Quick Check - IQC, you can prevent failures before they happen.
Make sure the site is in in-service condition.
Step 1) Ambient Conditions - Dew Point
Step 2) Surface Temperature of the slab
Note: make sure that the temperature of the slab is at least 10°F (5°C) above the dew point.
Step 3) % Moisture Content (MC) of the surface of the slab - use the Tramex Concrete Moisture Encounter 5 - CME5, or the Tramex Moisture Encounter X5 - CMEX5, to get quantitative percentage moisture content readings.
How to test:
- Make sure you have a clean area, abraid the surface as needed to get any residue off the surface of the slab, and avoid any painting or drywall mud.
- Press the meter on the surface and get a reading. And each place you take a reading, you want to "go around the horn": take a reading at 12, 3, 6, and 9 o'clock (rotating the meter 90°) and take note of the higher number.
Industry professionals generally recommend the number of 4% MC for floor coverings and 3.5% MC for concrete coatings.
When taking surface readings perform at least 8 tests for the first 1,000 ft² (100 m²) and at least 5 for each additional 1,000 ft² (100 m²) - per ASTM F2659 section 10.6.
Industry standards say if no pre-installation moisture testing was performed and a flooring or coating encounters a failure due to moisture after the install, the responsibility falls on the installer. Tramex recommends the Installation Quick Check - IQC, as a way to protect yourself against any moisture-related claims after the installation.
There are two kits to perform the Installation Quick Check:
- IQC Plus Kit: Digital CMEX5 and Infrared Thermometer - tramexmeters.c...
- IQC Kit: Analog CME5 and Infrared Dew Point Scan Thermometer - tramexmeters.c...
Both come in a convenient carry case and are equipped with Bluetooth to connect to the Tramex Meters App.
tramexmeters.c...
Learn how to correct a dew point issue in the part 2 video: • Installation Quick Che...
Chapters:
0:00 - Introduction
0:15 - Ambient Conditions can change
0:31 - Step 1: Ambient Conditions - Dew Point
1:02 - Step 2: Surface Temperature of the Slab
1:37 - Step 3: %MC of the surface of the Slab
1:58 - How to take surface moisture readings
2:43 - Recommended %MC numbers
2.52 - How many readings per area
3:04 - Responsibility for a flooring failure
#flooring #flooringinstallation #moisturemeter #moisturetesting #concrete #concretemoisture #concretemoisturetest #moisturecontent #coatings #dewpoint
For more information please visit us at:
www.tramexmete...