Concrete on steel deck. Workshop UNDER garage

Рет қаралды 37,275

Күн бұрын

Oceanfront build forges ahead and Nick shares the progress.
SITE VISIT
• Site Visit with NS Bui...
Let Nick consult your next or current project
Talk about your business,1 on 1 with Nick now. limited spots available.
www.nickschiffer.com/booking
INSTAGRAM
/ nsbuilders
/ nickschiffer
SOFTWARE
get.buildertrend.com/nsbuilders
NS BUILDERS
www.nsbuilders.com/
VIDEO NOTES
Site Visit walkthrough high-end new construction, renovation, and remodeling projects. Looking at architectural details, building products, framing, electrical, plumbing, staircase, tremco, modern design, door hardware, repair, fox, replace, subtle details, modern staircase, mechanicals, and finish details. NS Builders shares building and project management insight while showing step-by-step progress of ongoing jobs. Site Visit is hosted by Nick Schiffer owner of NS Builders. Waterproofing your basement?
Building products, cabinet tips, new building secrets, and framing become architectural details. New construction and renovation ideas start and finish with building and running successful builds.
NS Builders operates in Boston, Newton, Cambridge, and in the greater Boston area. Currently, 5 projects are under construction with a few new projects coming soon.

Пікірлер: 28

@latitude48design 2 жыл бұрын

Nice detail with the flush door sill!

@JoeGerossie 2 жыл бұрын

I could hear that cold in your voice! I just started working outside for a bit today and I feel ya, gotta get acclimated

@NSBuilders 2 жыл бұрын

Yeah man. Under estimated the cold this morning 😂

@asztapaszta9 2 жыл бұрын

Thank you for these videos! I love the information and detail you pack into them!

@cmm170526 2 жыл бұрын

Great video and information. Thank you for sharing this video! Love watching this series!!

@kevingrierson2331 2 жыл бұрын

You're my dream builders!

@kimhuyoung5482 2 жыл бұрын

What type of sealer do you have in mind for the composite metal deck surface? Vehicles bring in various corrosive deicing chemicals from the roads and water will easily penetrate through porous concrete topping to eventually rust out the metal deck below. Drainage and waterproofing is very important on garages.

@giovannifiorentino8947 2 жыл бұрын

Nick, nice touch showing the threshold detail drawing. Did you already talk about the seal around PVC piping against the concrete slab?

@julianugentarchitect 2 жыл бұрын

The team added a neoprene sleeve around the pipes where they go through the concrete - see black at mid point of vertical pipes. There’s one horizontal pipe that needed to go through the concrete haunch at a bearing wall - in this case, the 2” diameter pipe goes through a 4” diameter pipe sleeve.

@jonathanmilton9753 3 ай бұрын

I would love to see how you water proof that.

@thefirm13 2 жыл бұрын

What was the size of that suspended deck? Home is looking great and excellent detail on the assemblies.

@keithblake2633 2 жыл бұрын

Maybe there is more info in the detail but aren’t the anchor bolts located differently in the drawing you put up?

@julianugentarchitect 2 жыл бұрын

Good eye! The j-bolts were installed during the pour and centered on the wall, which is typical. The team realized that they needed to be offset in locations with the glass door so sawed them off and used epoxy anchors.

@ekurdesov 2 жыл бұрын

Hi, where can I buy that metal sheeting panels you have? I laterally looked everywhere and I can’t see where to buy them here in Midwest

@urchin11 2 жыл бұрын

No drain for the garage? I would have thought there was one to protect the shop below from snow/rain dripping from cars.

@ykciR 2 жыл бұрын

How much water do you think is going to drip from the cars? Lol

@dewholdingsllc1050 10 ай бұрын

If you have an exposed deck on the underside of it where would you place insulating foam in relation to that corrugated metal?

@ClintL63 Жыл бұрын

what the support wall look like underneath?

@tomaszlow1186 2 жыл бұрын

Are your J bolts not in the way of the door/window sill? The drawings show them on the interior/top portion of your sill plates, but they seem to be on the outside/bottom portion of the sill in the field. Nice detail

@julianugentarchitect 2 жыл бұрын

The j-bolts were cast into the wrong location. The team discover it when laying out the sill so they cut off the ones at the door and used epoxy anchors. The ones you can still see are at the regular wall.

@dominicwood3750 5 ай бұрын

What’s the ballpark cost of the sheet sheeting either per square yard or sheet?

@Monuments_to_Good_Intentions 2 жыл бұрын

I hope to get my house sold, and buy a bigger place to build a nice shop or two! Then I can get my video better and more consistent.

@CanadianParamedic 2 жыл бұрын

I'm not a smart man 😂, but was ICF construction a conversation when designing this house?

@Ms2Chill 2 жыл бұрын

Icf definitely would have made this build simpler and likely more cost effective especially given metal beams are not cheap

@konfidante 2 жыл бұрын

I would not want to drive a car on to the concrete slab. Missing a tomen of rebar in the middle. I presume it even is a double car garage. Am I missing something?