Configuring Basic MPLS/L3VPN
Рет қаралды 73,531
7 жыл бұрынXtremeIE's J.P. Cedeno explains how to configure the basics of MPLS/L3VPN using MPLS LDP, VRF, EIGRP, and MP-BGP.
Get more videos @ www.xtremeie.com
Facebook: / xietraining
Study Group: / xtremeie
@pablotoscaniniwrc 6 жыл бұрын
Awesome! I really enjoyed it and gave me some light on concepts could't get before. Thanks for the great video.
@Wajiiiiiiiiiiiiiiiii 6 жыл бұрын
This is brilliant! This is the best video on MPLS I have watched. I understand it so much better now. Thanks!
@XtremeIETraining 6 жыл бұрын
Wait until I finish with the entire series ;-)
@Wajiiiiiiiiiiiiiiiii 6 жыл бұрын
XtremeIE Awesome!!!
@totoybato6280 6 жыл бұрын
i like how you model your tutorial to the actual R&S lab exam. To all candidates, listen and learn...:)
@kavehseivani 5 жыл бұрын
Such a great content. Thank you very much.
@pankajknitcs1 4 жыл бұрын
Great job.
@davehouser1 5 жыл бұрын
Editing my original post. This video is great. I never knew how much encapsulation was needed to configure igr to egr to vpnv4. Took me a couple days to configure this environment in my gns3 but it works! Thanks again J.P. For those looking for the configurations, below are links to the configuration steps I used (following J.P.'s instructions) as well as my gns3 lab. Sorry for spelling errors. Instructions: drive.google.com/file/d/1tbpn6uUn0IbeI8XWqF_6Lan7S-NkPqky/view Gns3 files (Note: I configured loopback 1-3 as /24 instead of /32): drive.google.com/file/d/1l1Fzo00o_9GGLvneR9H_qSsi8MIqmYW1/view
@ferozsyed2014 4 жыл бұрын
i have some doubts in this lab, could you please help me ? i am trying to redistribute OSPF E2 routes on R4 to VRF but it doesn't work. my goal is to ping from R6 to R1.
@vijaychebium3216 6 жыл бұрын
Do we have to configure iBGP on all PE & P routers or its just need to configure on R5 & R4?
@rendog311rendog2 7 жыл бұрын
really good video sir! keep going'
@gertibobo9047 6 жыл бұрын
Perfect
@tusharnaik4710 6 жыл бұрын
really nice video......but where is mpls series video
@virtualofficesjm 6 жыл бұрын
What version IOS can i use with the full capabilities as seen in your video, i have a couple of 2821 i will be trying to use.
@XtremeIETraining 6 жыл бұрын
I am using the latest VIRL images.
@SkillSet2 6 жыл бұрын
You need SP Services, Enterprise Services, Advanced IP Services or Advanced Enterprise Services IOS for MPLS capabilities.
@davehouser1 5 жыл бұрын
I used c7200's with PA-GE cards in slot 1 - 3.
@ferozsyed2014 4 жыл бұрын
please anyone help me, how can i send OSPF routes from R5 to R7.
@XtremeIETraining 4 жыл бұрын
Hi Feroz. We have the full course on Udemy, which will show you how to configure this topology using OSPF. www.udemy.com/course/xtremeie-mpls/
@ferozsyed2014 4 жыл бұрын
@@XtremeIETraining once i buy..you will clear my doubts ?
@XtremeIETraining 4 жыл бұрын
@@ferozsyed2014 We do not offer 1-on-1 training. However the course does walk you through configuring OSPF between the CE PE routers.
@0562196921 5 жыл бұрын
what pc do you have ,that can handle all these routers 😮
@davehouser1 5 жыл бұрын
I had the same problem. The version of GNS I am running (2.1.16) allows you to auto configure idle PC for each router. Do so by right clicking each router and selecting "auto idle-PC" while powered on. This will put the router in an idle mode when not being used to save on CPU of your local host. The lab will slow your PC to a halt if you dont.
@XtremeIETraining 4 жыл бұрын
I use EVE-NG with IOU images most of the time.
@srh_btk 4 жыл бұрын
It's first time when I've slowed down the video to understand what's happening.... Please, not so fast next time.
@ferozsyed2014 4 жыл бұрын
24:47 wrong network statement
@gerolejolegion8725 6 жыл бұрын
29:27 is where all the magic happens...
PM Networking
Рет қаралды 17 М.
Roger Perkin
Рет қаралды 67 М.
notebook-31
Рет қаралды 89 М.