Learn how to configure Inter-VLAN Routing on SG350 and SG550 Switches
Пікірлер: 39
@greghaa3 жыл бұрын
For SG350 under VLAN Management -> Interface Settings, you must set the ports to Layer 3. Layer 2 will not route between VLAN's. The video did not cover this.
@Panda330093 жыл бұрын
Lmao thx
@jh25613 жыл бұрын
I got the routing to work after leaving the interfaces at layer 2 and enabling IPv4 routing. Perhaps I am missing something, but I found enabling Layer 3 and IPv4 together did not work. I think the switch performs Layer 2 switching with IPv4 routing, but when the interfaces used are at layer 2. The Administrative Manual is severely lacking in detail. I can ping between IP 10.1.1.1/24 & IP 10.1.2.1/24 and network shares on PCs on different VLANs can be accessed. That is why I bought the switch, but the information on setting up is brief and for the experienced user.
@saurabhraghuvanshi71262 жыл бұрын
@@jh2561 Hi sir. I am also stuck with the same situation. Can you pls guide me through.
@mrcgeraldes2 жыл бұрын
This has to be incomplete..... This just shows hot to create 2 vlans. Not hhow to forward traffic between the 2
@77seconds3 жыл бұрын
I don t know about the specific settings in a SG350 switch, but in my SG250 i first needed to activate the "IPv4-Routing" checkbox under IP-Configuration > IPv4 Interface...
@JustaRandomtre3 жыл бұрын
I am planning to buy sg250, can we configure multiple vlans on single port..
@CiscoSystems3 жыл бұрын
Hi Prateek, It is possible. You can have three vlans on one port if the switch configuration allows it. You can learn how to do this at community.cisco.com/t5/networking-documents/how-to-define-the-vlans-allowed-on-a-trunk-link/ta-p/3131083. We hope this information helps!
@christophersaunders46643 жыл бұрын
Hi and thank you for this video. Following the steps detailed here on my SG350-10P switch, I'm not able to ping the other vlan when connected to a configured port.
@user-ci4ib2pp5s2 жыл бұрын
It doesn't work at all. I don't understand, why CISCO is publishing a video with the incorrect instructions. Or this is the advertisement for a spokeswoman from CISCO?
@igorsimonovic29362 ай бұрын
I bought cisco sg350X-48 because of inter vlan routing. When i do the same setup as in video in cisco packet tracer it works. But when i repeat in real device it simply doesn't work. It should be easy but it doesn't. I do not know if I am missing something.
@CiscoSystems2 ай бұрын
Hi there, we're sorry to hear that you're having trouble. Please open a case with our Support team at: cs.co/60555YCZ5. They will be able to look into this further for you. Thank you.
@akhmedsaymaev2327 Жыл бұрын
I have some ports disabled after power off on the cisco switch how to enable them through the web interface
@obadvw3 жыл бұрын
this doesn't work , devices can't reach each other on different Vlan
@haybolrambol500111 ай бұрын
how can I configure VTP domain name in this kind of cisco switch? thanks
@jh25613 жыл бұрын
I connected the SG350 to a TP-Link TL-ER7206 router and an ASUS RT-AC3200 router. I followed the Inter VLAN instructions in this Cisco video and it would not work. I created VLANs 2 and 3 and enabled IPv4 routing in the SG350. I left DHCP enabled in the routers and they gave the SG350 VLAN IP addresses. After experimentation and further reading, I used static routes in the routers to direct traffic to the VLAN(s) and everything works. I do not know if Layer 3 should be used, but I left the interfaces at Layer 2. The Cisco videos are uninformative and make if difficult for anyone new to networking. Why not include some useful basic information in the video?
@IvanRosaT Жыл бұрын
This is great ! I can ping from each subnet their default gateway, although I dont have internet access among them, how to fix that?
@CiscoSystems Жыл бұрын
For questions about some of the technical content you’ve seen this, check out our CiscoInsider User Group to engage with product experts and share best practices around Cisco tech in private community forums. Learn more community.cisco.com/t5/cisco-insider-user-group/ct-p/ccp-home
@akhmedsaymaev23272 жыл бұрын
Configured only through the terminal CLI
@sureshbandi1112 жыл бұрын
Your smile is very njce
@shanebagel8 ай бұрын
Bro u trying to pickup women in cisco tutorials lmfao
@kundanbisht20013 жыл бұрын
Nice video...👍
@andresavoie92483 жыл бұрын
This definitely does not work on a SG350-10MP I have one and I set it up exactly the same, well I sent another route to 0.0.0.0 0.0.0.0 also via default gateway 192.168.0.1
@manojpote36303 жыл бұрын
thanku so mach to help me
@shaikhnadeem8255 Жыл бұрын
Thanks
@nooraalam32696 ай бұрын
Kindly, Make A Video On Trunking Between 2 Cisco SG350 Series Switch
@lokeshsingh13143 жыл бұрын
Bought sg350..I have 2 vlans and 1 vlan default have internet ..but the other vlan is not able to reach to the internet..what should I do now?
@CiscoSystems3 жыл бұрын
Hi there. We recommend that you visit our Cisco Small Business Community where you can post your technical questions for experts and peers to review. Thanks for reaching out to us! community.cisco.com/t5/small-business-switches/bd-p/5976-discussions-small-business-switches
@rosssnow83313 жыл бұрын
This absolutely does not work on my SG350-G. Started with brand new switch and factory default settings. I can ping across VLANs to each VLAN interface IP, but not across hosts on each VLAN.
@rosssnow83313 жыл бұрын
Also to note - I can move the hosts to the same VLAN (I assigned two ports per VLAN), once the host gets the new IP on the new VLAN, then I can ping between hosts.
@Avael2 жыл бұрын
Am I the onlyone noticing that she is using Windows on a MAC?....
@petsworld37743 жыл бұрын
How to find each device of ip address in sg350 switch and how to know ip address of each switch
@CiscoSystems3 жыл бұрын
Hi there, the following discussion from the Cisco Small Business Switches may be helpful to you: community.cisco.com/t5/small-business-switches/sg350-show-ip-interface-brief/td-p/3824639
@anthonystewarti.maugaotega2 жыл бұрын
can this switch support eigrp ?
@CiscoSystems2 жыл бұрын
Unfortunately, these switches do not support EIGRP.
@itbaljit54443 жыл бұрын
not working in sg350 switch i have 5 switch. don't waste your time i do same setting but pc not ping other vlan
@CiscoSystems3 жыл бұрын
Please reach out to a Cisco expert via email at tac@cisco.com or call us directly at 1-800-553-2447 to get assistance immediately. Feel free to message us with any other questions you may have. Thank you!
@itbaljit54443 жыл бұрын
@@diogooliveira7631 yes bro its done, i add static root in my firewall of vlan, then vlan ping working