CONFIGURING THE VELOCITYONE FLIGHT | MSFS | Part 1

CONFIGURING THE VELOCITYONE FLIGHT | MSFS | Part 1 | For Both PC and Xbox Users

Рет қаралды 112,548

Күн бұрын

The default aircraft profiles are often difficult to understand and manage. This guide will help you create your own profiles for your aircraft. In Part 1 of this configuration guide series we set up all the common functions to the axis and buttons on the VelocityOne Flight Yoke and Throttle Quadrant. In part 2, (which will be coming shortly) we will configure the VelocityOne Flight with different profiles to suit different aircraft types.
REFERENCED LINKS
XBOX users can find Part 2 here: • VELOCITYONE FLIGHT AIR...
PC users can find Part 2 here: • VELOCITYONE FLIGHT AIR...
VelocityOne Flight Review: • VELOCITYONE FLIGHT | T...
Turtle Beach V1F details: uk.turtlebeach.com/pages/velo...
Turtle Beach Simulation Discord Link: / discord
TIME STAMPS
00:00 Introduction & Series Format
02:36 Creating A New Profile
03:37 Configuring the Yoke
19:45 Flight Test
22:51 Coming Up
SIMHANGER KZfaq Channel Link: / simhangerflightsimulation
Join Simhanger on Discord: YOUR DISCORD INVITE: / discord
For more details visit Simhanger Website: www.simhanger.com
Connect with me on Facebook, Instagram and Twitter: @Simhanger1
✈ Would you like to support the Simhanger Channel? Well you could buy me a coffee here :) www.buymeacoffee.com/SIMHANGER
Looking for help with MSFS, then check out my HOW TO GUIDES, link to playlist here: • MSFS HOW TO GUIDE
MSFS on Xbox playlist can be found here: • MSFS on XBOX
Thanks for watching

Пікірлер: 235

@SimHangerFS 2 жыл бұрын

Xbox users can find part 2 here kzfaq.info/get/bejne/gbKbh8tqrM6Xp40.html

@jamespepper1937 9 ай бұрын

Mark, I was so frustrated, having no clue how to do what you have demonstrated. Now I am so happy! You are very generous to take the time and trouble to help all of we newbies get the most out of the powerful VelocityOne device. Bravo!!

@DBR00 5 ай бұрын

I cannot thank you enough for putting together this easy to follow video. First time user of the Velocity One and I had no clue as to how to get it working. Please enjoy a little token of gratitude from me. Watching from Las Vegas, NV.

@SimHangerFS 5 ай бұрын

Thank you for supporting the channel. 👍

@get_outdoors 2 жыл бұрын

Just received mine today, I’ve got a headache after 8 hours of trial and error setting profiles for the Cessna 152 and TBM 930. I didn’t build from scratch but instead stripped out the single prop profile. I actually set my Hat-1 to Pilot views(up and down) and once in instrument view I can toggle left and right between instrument views. Trial and error setting the levers for TBM but now I’ve got throttle, landing gear and flaps configured. The only other change I made was smart look combining LB and B2 as this was more representative of when I used the Xbox controller. I think I’ll follow your video tomorrow to build a base profile. I’ve blamed you to the Wife for the expense, your community fly-ins are very good 👍, cheers for effort you make for the community, great video. Tonydarkzero.

@NOELTM Жыл бұрын

As a newbie to MSFS and the Velocity One I have found your videos immensely valuable and informative in getting started and understanding how things work. Thank you very much for taking the time to share your knowledge and experience.

@10CrazyGlue Жыл бұрын

Thank you for this & all of your other msfs content! This yoke was a little overwhelming at first, but you ability to break it down Barney style was a massive help.

@MrBloxboy 2 жыл бұрын

Thanks Mark for your easy to follow tutorials. Looking forward to part two.

@TheShredderofsnow Жыл бұрын

Thank you for the very detailed video! I just ordered this yoke along with the rudder pedals for my Series X and anxiously awaiting delivery. Your review video really helped me when deciding to buy this set up. This video is going to help me alot when settling up my yoke when it arrives! Some of your suggestions I didn't even think of when planning it out in my head and I love how you brake it down step by step making it easy to follow along with! If you don't already have a video out I would also love to see how you would set up a multi engine plane for the velocity one. I've been wanting to get into those planes but have been pretty hard to fly with the Thrustmaster Hotas One that I've been using. Can't wait to get my Velocity One in a couple days!

@willemfs6733 2 жыл бұрын

Soothing as always. Thanks for your energy Mark!

@billstruth1128 Жыл бұрын

Mark Thank you very much for this excellent guide! I have been a legacy X-Plane player on a Mac. Between that and being much older was finding switching to Flight Sim 2020 very frustrating despite its glorious eye candy. This video was a wonderful discovery with your experienced insights on setting up operations in addition to your suggestions on use of 2020 features.

@shhteeeve Жыл бұрын

I'm a total noob to flight sim and got a velocity one and these videos are invaluable to me. Great work!

@Simon-us1fu 2 жыл бұрын

What a gem of a video, thank you for your time and input into this, so valuable. I have used this set up on the caravan and seems to be working well.

@matthewtaylor2965 2 жыл бұрын

Brilliant video for those who want to try and understand how to assign controls from xbox controller and transfer to velocity after purchasing. Makes very good tutorial on how to and helping understand the terminology of the aircraft controls and applying them to your new velocity. Fantastic video

@BOOTSYSMOVIES 2 жыл бұрын

Thanx Mark I figured it out myself how to arrange the V1F with re edit the existing default profile and save this as a new file. Compliments for your clear and easy to understand method of explaining your way 👌👏

@mcculleys3780 4 ай бұрын

Wonderful overview! Turtle Beach should be paying you for this! Thank you.

@KnottyFlyer 2 жыл бұрын

Great video. Very helpful. Well organized and clearly presented. Excellent instructional video for a newbie like myself. Thank you.

@phillong4762 2 жыл бұрын

Thanks for help mark. The trouble i had though because we set up a new profile we didn't have the throttle to be able to test the plane like you did. Found part two 👏

@MBL2210 8 ай бұрын

Couldn’t be ANY better. Thank you!

@galaxypursuer 2 жыл бұрын

Brilliant Video. As I'm learning to fly a 152, this video really helped. Thank you.

@berger1005 2 жыл бұрын

Thanks Mark. I appreciate your good work.

@markheatherington8367 Жыл бұрын

Wonderfully explained - thanks so much!

@Kevin-ib4gv 2 жыл бұрын

Nice videos Mark. Just a tip about real world flying. Rudder and aileron trims aren't used to counter crosswinds aloft. Set a crab angle and leave your trims alone. 100 knot airspeed, 20 knot 90 degree crosswind, and nose 12 degrees into the wind is a basic setup to stay on course for 172's. Using a E6B will give results for other wind speeds and angles. I would keep the rudder/aileron hats free for other purposes and assign a keyboard command for the few times you may them. Set your autopilot for GPS and VS mode and you'll never touch a trim anywhere.

@CanadianTexaninLiguria 2 жыл бұрын

I'm so glad I have the Stream Deck now - no messing around with my wheel and throttle anymore

@SCAerialsSteveCarpenter 2 жыл бұрын

Hello Mark, Thank you for this detailed configuration video. I just purchased the Velocity one controller, and this video will be an excellent asset for configuring my controller. I found your channel videos by searching VO on KZfaq. New subscriber, Thank You.

@arianukas Жыл бұрын

thank u! i got that Yoke for christmas today, and we have ordered msfs so this will help a lot cuz i’ve never played msfs :)

@Daniel-rv9hf 2 жыл бұрын

Brilliant video. It was a big help to resolve my mapping issues. Thanks a lot.

@morganbisley886 Жыл бұрын

Just what I needed thank you so much for this video. Love your content

@parkerstucki9833 2 жыл бұрын

Absolutley amazing videos. Just subbed.

@stormtracker1 Жыл бұрын

Hands down the best how to video there is!

@suryarahardian3141 Жыл бұрын

Loud and clear Sir...thanks for your guidance...

@QuidProqu0 Жыл бұрын

Thank you so much. Bought this a while ago and was having nightmares of how to use it!

@Dronerangerspro 8 ай бұрын

Excellent tutorial. Thank you!

@zonnetjeschijnt Жыл бұрын

Here’s a suggestion for the case of taildraggers, when you need soft/subtle braking… you can assign two of the throttle levers to the left and right brake axis 💡

@johnporter5828 2 жыл бұрын

Just plain excellent ! Thanks !

@MrWildbil7 7 ай бұрын

excellent tutorial, the best to date on youtube

@MikeTaylor-tw5wb Жыл бұрын

Thanks for this mate. Very helpful

@DcRizza75 Жыл бұрын

Thank you!!!! Absolutely fantastic instructional!

@bubblehead78 Жыл бұрын

Superb presentation, Mark. You are an excellent instructor! BTW, while flying yesterday, that 'don't sink' heard in the video around 22:30 drove me crazy. Have to figure out how to silence it.

@ratz7150 2 жыл бұрын

Just wan to say that a new firmeware update is available for Velocity one. With this the reverse thrust toogle option now works. You pull your levers completly back and than forward and you can controll your reverse thrust.

@kamilarunkowska4832 Жыл бұрын

For me it sets it to reverse thrust at 50% I don’t know how to fix

@billconway1753 2 жыл бұрын

Hi. Thanks so much for producing this video. Learned a few tricks from you that are really useful. Found this video to be very helpful. Can't wait to watch part 2. Does part 2 cover sensitivities for this thing? I know the A 320's are very finicky in this area. My Saitek pro had really large dead zones to compensate for it. I'm setup on PC so a couple things were different but I followed along. Note to users: I found that if I disconnect and reconnect TBV1, it goes back to XBOX mode by default, which is a problem for PC users. Has to be rest or MSFS won't recognize your controller. Love the B1/B2 buttons settings. Nice trick. Love it. Thanks again for a great video.

@rashidfarookee7521 7 ай бұрын

I am not a senior simmer having joined the community in Feb’23.Your tutorials and videos on various subjects have been of immense help in learning the ropes of this marvellous game or better still Flight Simulator.I started with Thrustmaster Hotas One configuring which was a breeze. Having gained reasonable experience I thought it would be a good idea to upgrade which I did in the shape of Turtle Beach Velocity One.I am on Xbox and Velocity has been acquired just a week ago.It also appears updated with firmware of 1.0.0.I straight away got down configuring it following your videos but got frustrated due not getting the configuration right despite following every step as per your videos.The bindings though correct are not confirmed by the movement of axis in the white horizontal bar.I just don’t seem to understand where I am going wrong or is it some kind of a bug which is not letting it to work.I did read on FS forums that people faced similar issues and it was flagged as a bug in earlier stages.I would appreciate if you can give me some pointers to troubleshoot this bug.

@ethanyake3730 Жыл бұрын

Thank you so much this helped a lot

@Gideonsmythe 2 жыл бұрын

You are a legend Mark, I've struggled to configure mine and have had some bad flights. It really doesn't work with jets using mode 2 (the twin engine). Thanks again, I've got some exciting simming ahead of me this weekend.

@hamsack981 Жыл бұрын

Thank you so much. 😊

@ZenonZolek 2 жыл бұрын

Thank you so much, great assistance

@frankw204 2 жыл бұрын

Excellent video. Just received the VelocityOne yesterday. Struggled with the buttons with the exception of the obvious controls. So happy to watch your video. Why Turtle Beach couldn't have offered more literature is beyond comprehension. Found how to successfully update the controller firmware (crucial) in conjunction with the Xbox on the internet. That also would have been helpful with some information in the packaging. The quality of the device and the careful packaging were great. It should be noted that the alert panel (SIP) behind the yoke are awaiting firmware update before they are totally functional (at least on Xbox). Thanks again, much appreciated.

@jdogos 2 жыл бұрын

1000 Thank you, the only difference i made is with the hat up/down. I used them to increase/decrease cocpit height view. Greetings from Greece!!!

@kiflelk Жыл бұрын

Thank you for your brilliant video. One question I have is after you configure a number of buttons you can directly jump into the cockpit to check on your settings and I couldn't figure out how you transition to that view. Please help

@caspers5431 2 жыл бұрын

Great video thank you. Question about the rudders. When I press the left or right rudder trigger the rudder operates correctly but while I'm still holding one trigger button the rudder automatically returns to the default position. Watching the rudder pedals they work and then come back up while still holding the trigger. Am I missing something? Any advice will be greatly appreciated 👍🏼

@tyroneturner4128 2 жыл бұрын

fantastic tutorial. easy for us noobs to follow.

@eldadisrael4455 2 жыл бұрын

Thanks! Really helpful. Is there any way to talk to the ATC without using the Xbox controller/ mouse?

@sariearar5614 3 ай бұрын

Hi, Thanks for the video, it helped me as a first timer to set the said yoke on my PC, however, I can't seem to be able to assign the trim wheel on my PC for MSFS 2020. Any ideas what I need to do?

@adrianjohnston6764 2 жыл бұрын

Great videos, just a problem I can solve yet. B1 external view, but my pov 2 isn’t giving free look🤔 in cockpit view, no problem, what am I missing?

@stevencastelletti577 2 жыл бұрын

Love your assistance. Im using the Cessna 152 and during night flights, I can't get the instruments to light up. Can't figure out which ones they are. Can you please advise me? Im a beginner.

@gmasterking1 2 жыл бұрын

Great video!! Both part 1 and 2 were a great help! What button do you use to toggle the engine on and off?

@SimHangerFS 2 жыл бұрын

I use one of the buttons on the throttle quad

@gmasterking1 2 жыл бұрын

@@SimHangerFS last question haha what is the engine start function called?

@mikael3529 6 ай бұрын

Hello and thanks for very nice video. I usually fly Pmdg 737, do you know the best sensitive for the yoke?

@XhaleR 2 жыл бұрын

Great video and help setting up the VO! I have copied your profile setup as in the videos on both the yoke and quad as this suited me perfectly and have a question regarding the Aileron trim (ref.15:47). Is there any "reset aileron trim" function as with the rudder trim? I found a control called "Reset Aileron", but this didn't have any effect on the trim. Any tips or workarounds would be appreciated.

@SimHangerFS 2 жыл бұрын

No reset that I am aware of unfortunately

@billcom1200 2 жыл бұрын

Mark, question about using rudder controls ( I don't have the unit yet). On takeoff, my right hand, would be on the throttle. I fly GA planes, and most have a pronounced left yaw tendency. How would I apply right rudder when my right hand is on the throttle? Switch the rudder inputs? Thanks, Bill

@stephanebnt1682 Жыл бұрын

Hello Sir , to start, I would like to thank you warmly for your videos and, following your advice, I bought a yok turtle beach. I am your new French subscriber. then I take the liberty of asking you for a little video advice on the sensitivity settings of your yok. thank you

@SimHangerFS Жыл бұрын

For pitch turn down (minus) sensitivity by just a little….5% and roll I leave at default.

@certifiedgoose Жыл бұрын

When I pull back the throttle for the elevator axis, mine says L-Axis Y and the test does not work

@SpatialGuy77 2 жыл бұрын

Hi. Thanks for the nice clear video. With your brake selection, haven’t you chosen an on or off option rather than graduation using brake axis so you brakes can be on a little or a lot or anywhere in between, rather than 100% on or OFF?

@SimHangerFS 2 жыл бұрын

On and off only for parking brake.

@pietve905 Жыл бұрын

Is it possible that button assignments have changed since the latest version? Trying to follow your set up but get different assignment assignments?.

@chrisbeccarel7240 2 жыл бұрын

Hi Mark, I did add some internal friction to the upper and lower levers works quite well but does requires taking the unit apart. Can send you some pictures if you are interested. I do have a couple question for you: 1.how did you set-up the smart cam.? 2.how are you sensitivity settings? I'm on XBOX... Best regards,

@SimHangerFS 2 жыл бұрын

I have some general guides that may assist. Check out this playlist. kzfaq.info/sun/PLSyT1Loyov5iZU38-D8xEwhTyKqES4_e9

@chrispurkiss1491 Жыл бұрын

Hi, new viewer. I purchased a refurbished model but it didn't come with the wallchart. Any idea of how I can either obtain one or at least print one off so I can compare the PC/Xbox differences. Thanks

@Markinpuff 2 жыл бұрын

Is this ok for a total beginner? I’m just finishing my PC build and getting ready to fly around in my room.

@markgriffin2285 2 жыл бұрын

Is one able to load an existing profile with MSFS 2020? I just wonder if people have created good profiles that a person could load into MSFS 2020 and utilize that particular profile.

@casscamden740 2 жыл бұрын

i am really struggling with this so i hope youre video helps me. im new to flight sim & therefore new to the velocity one as well. its plugged in...i briefly played fsx where you started in fligght school in a microlight but here in this fs2020 i dont know where im supposed to start well im guessing its in the bit where it says basic controls & to look around but my problem is when it then says to go in cursor mode press buttons 19 & 20 ...i pressed all the buttons & there is no button 19 & or 20 so why on earth wouldnt they do a better job at explaining & the ui is terrible . you kind of have to have already built an actual real plane to navigate this thing

@markgriffin2285 2 жыл бұрын

You need to show what button you are hitting for settings! For the Camera External View, I have no idea what to push or which direction to go. Please Help!

2 жыл бұрын

Thanks a lot for a great video! May I ask a noob question, even before I have get going with my Velocity One. How does the status panel behind the yoke? I have only static light.

@SimHangerFS 2 жыл бұрын

The config options are still in beta testing, still to be implemented.

2 жыл бұрын

@@SimHangerFS Thanks!

@NormanHolden 6 ай бұрын

Thanks!

@SimHangerFS 6 ай бұрын

Thank you for your continued support of the channel Norman, greatly appreciated. 👌

@phillong4762 2 жыл бұрын

Fantastic help thank you mark. Please can you tag me in part two please 🙏

@ArieWasserman 9 күн бұрын

Hello Mark. Your video is great, I've been following you since I had an Xbox. I purchased a desktop computer and a new flight simulator "Prime De Luxe". I followed your first video very carefully. I followed all the steps. And for some reason the simulator does not recognize only the trim weel. I would be very grateful if you could write me which button to press in the shortcut key? Or how to make the wheel recognize a key. Thanks in advance Aryeh

@christinanarz6852 11 ай бұрын

I can't get the trim wheel to work... can anyone help

@thejoshuatree6924 Жыл бұрын

Every time I start flight simulator my xbox controller is selected in the control options menu. But I want my Velocity Flight to be selected automatically. how do i set that up?

@Inpreesme 2 жыл бұрын

Thank you

@berger1005 2 жыл бұрын

Hey all, I am unable to map the AP Heading bug hold on the controller. Does anyone know if this is a MSFS issue? Cheers

2 жыл бұрын

Hi! Amazing help here ... is there a configuration guide video for the Throttle (PC) from yours? Regards.

@SimHangerFS 2 жыл бұрын

Sorry no, only Honeycomb Bravo TQ

@billpowers8213 2 жыл бұрын

MIKE HOW DO YOU FLY THE KING AIR. TWO ENGINES BUT SOFTWARE ONE HAS ONE ENGINE. ANY IDEAS?

@muhammadusman3476 2 жыл бұрын

Hi, very good demonstration. Can you please help me with one thing. It’s the quadrant setting. The trim wheel is not shown on my control panel as it is in your demo. Thanks

@SimHangerFS 2 жыл бұрын

The trim wheel is shown with the quadrant not the yoke.

@denodan 2 жыл бұрын

How come, if I make a profile for my Volecityone yoke and go to use it, it won't work? All I done was change sensitivity of my twin jet profile. If I go back to the default profile it works. Also if I use a new profile abd use auto pilot, aircraft just circles

@FAtoCPA 2 жыл бұрын

Do you need to add a profile to the VF1 itself to match the selected profile in MSFS? Example, if I selected single engine in MSFS, I also have to select single engine on the yoke. And if so, how? Thanks for such great videos!

@SimHangerFS 2 жыл бұрын

The profiles on the yoke are for training purposes only. Active profiles are those selected in MSFS.

@donatasjakimavicius9968 Жыл бұрын

Hi, my pc shows the picture of velosity one in controls options but its named controller xbox 360 fow windows. Whats the problem?

@kobecamarillo3547 2 жыл бұрын

Hey! I seem to be having a problem with my L Axis 3 for my elevators. Whatever i do they dont work, so frustrating… thank you

@SimHangerFS 2 жыл бұрын

Check in windows that the axis is calibrated and working. Check nothing else is assigned to that function and ensure pilot assist functions in the assistance menu are all off.

@geotheguy Жыл бұрын

This was a very helpful video, but I have some thoughts. As a new MFS player I am wondering, What about all of the other assignments/keybinds? And what Im getting too is, do I need every single assignment for me to have a good experience in the game.

@RonHamill818 2 жыл бұрын

Do you have a guide to all of your presets listed somewhere. I followed your video for Xbox/ turtle beach button assignments but when I returned the settings were mostly gone. Great job in your explanation but it would be great if there was a list of the settings. Thank you.

@SimHangerFS 2 жыл бұрын

Sorry not listed. Just haven’t had the time to do something like this.

@RonHamill818 2 жыл бұрын

@@SimHangerFS Thank you.

@stephenmason5682 2 жыл бұрын

As usual Mark great video, very relaxed and informative! Two weeks ago, possibly after an update, something critical has happened? On my velocity One yoke and PC version NONE of my single prop planes engines will now work? All levers and mappings work great including sensitivities, BUT the engine revs don't increase? It's like the assistances are switched on and stop the revs increasing? What's equally confusing is that the Yoke is perfect using the Xbox version? Have you heard anything about this please? Keep up your great work!!

@SimHangerFS 2 жыл бұрын

There are some bugs which should be sorted in SU9. Try changing config to throttle axis as opposed to throttle one axis etc.

@stephenmason5682 2 жыл бұрын

@@SimHangerFS thanks for that mark, I've tried so many things, I've moved over to my xbox version for now. The PC version is unplayable. Thinks for the update. S

@HolladayAviation 5 ай бұрын

Do you know if it's necessary to use the Xbox wireless controller while using the Turtle Beach Velocity One? The A/B/Y/X buttons on the yoke don't work all the time, so I've had to use the Xbox controller to get some things done.

@SimHangerFS 5 ай бұрын

No you don’t need to use it. Check your yoke firmware is fully up to date.

@HolladayAviation 5 ай бұрын

@@SimHangerFS honestly, I’m not too impressed with this Velocity hardware

@jeffreycnn 2 жыл бұрын

Is anybody having an issue with the Velocity Ones LT and RT rudder buttons? I have these set to control the rudder but it just gives me full rudder unlike my Xbox controller that adjusts the amount of rudder based on the amount of pressure depressed on the buttons. I have gone into sensitivity and can see it does not threat the buttons as a regular graduated axis. I have reached out to TurtleBeach but they are not very helpful. I feel I am missing something very simple and I am running the sim on an Xbox any ideas?

@thejoshuatree6924 2 жыл бұрын

Verry nice video! I use the velocity one with the Xbox series X. How can i update the Firmware? By unboxing the velocity one it has firmware 1.0.4.

@SimHangerFS 2 жыл бұрын

That firmware is the latest. No need to update at the moment.

@blakstar64 2 ай бұрын

Every time I create a new profile in this manner, things become flaky. Example: When doing the brake check at 13:40, when I try to push the throttle in it keeps pushing out all by itself. Works find if I just use the default profile, but goes to heck when I create the new profile as you demonstrate here. Any Ideas why? I am on PC.

@fairsyj9816 2 ай бұрын

I might be two years too late but i recently got a velocity one flight and for some reason its coming up as “3 axis 20button gamepad with hat” and I have no idea why could you help?

@jamiepastman5594 5 ай бұрын

please, can someone help me. once i setup and create a new profile, the new profile does not show up for selection on the yoke’s profile selection screen?

@SimHangerFS 5 ай бұрын

The profile can only be set and recalled from the in-sim control panel. The V1 profiles on the yoke are for show/familiarity only.

@sanmwaugh2003 Жыл бұрын

Hi do you need to setup the profile in the yoke like twin engine profile and then create a custom profile in msfs to use it . I setup some custom buttons based on twin engine profile on msfs but yoke won’t detect

@SimHangerFS Жыл бұрын

The profiles on the yoke do not transfer to MSFS. Or the other way round. They are purely there to help you understand what buttons do in each profile…ignore these…

@sanmwaugh2003 Жыл бұрын

@@SimHangerFS thank you. So any custom profile I set in msfs should work automatically is in it ?

@SimHangerFS Жыл бұрын

@@sanmwaugh2003 the profiles you set up in MSFS can be selectable in-sim.

@sanmwaugh2003 Жыл бұрын

@@SimHangerFS thank you so much for replying 🙏

@georgea.gordon6874 Жыл бұрын

Thanks

@SimHangerFS Жыл бұрын

Hi George, thank you very much for supporting the channel. 😊 Mark

@martijnkappeynevandecoppel2813 2 жыл бұрын

If you change your aircraft in msfs does it load the right profile itself or should you also manually load the other profile?

@SimHangerFS 2 жыл бұрын

It should load the last used profile for that aircraft, but often fails to do so.

@neilmackey9626 Жыл бұрын

Good day, Mark! Unless I missed it somewhere (watched Parts 1 and 2 several times), when it comes to the trim wheel on the throttle quadrant, did you stick with the default setting or make your own "tweaks"? (This is on an Xbox Series X). Mine just seems VERY sensitive with the default settings. Moving it just one "nub" seems to dial in wayyy too much trim. I tried some various settings but haven't seen any improvements...suggestions for better settings? Along those same lines...it there a "center" to that trim wheel or is it simply a continuous action? I thought about trying to find one and then marking one of the nubs with some white paint but perhaps I'm overthinking things... ;-) Cheers!

@SimHangerFS Жыл бұрын

I stuck with default.

@Trevs-Shed Жыл бұрын

Doesn't appear to work as shown on the new 1.3.3 firmware. I assign the first 3 settings and save, the movement only makes the name of button flash, the bar does not move, exit back to the aircraft and none of the 3 freshly assigned settings work.

@SimHangerFS Жыл бұрын

Check the update is installed correctly. Awaiting v1.4.0 due out soon I hope.

@Trevs-Shed Жыл бұрын

@@SimHangerFS Many thanks for the reply. I found that a reset of the Xbox series X was required before it worked as expected. One last question, the hamburger button is setup as per your guide but it only takes me out of the sim to the menu, pressing it again won't take me back in to the sim. Pressing the hamburger button on the Xbox controller does take me to the menu and another press takes me back in to the sim. Did I do something wrong there?

@melito1955 2 жыл бұрын

Vuelo con Fligth Simulator de Microsoft desde 1995 y Ahora Xplane 11 y Fligth Simulator de Microsoft 2020,

@bownjimi9518 2 жыл бұрын

Very nice tutorial :) (question for Xbox Series X) Any issue resuming the game from a pause??? some users say they lose control of the plane

@SimHangerFS 2 жыл бұрын

Not from my experience. Quick resume works good too.

@dundisdundat7022 2 жыл бұрын

If it's auto trimming and stuff I get this sometimes loading in airborne in the Xbox just give her a few yanks up and down or a barrel roll I know it's a simulation and doing stuff like that is not the most representative of that but it gains your control over the surfaces again

@SimHangerFS 2 жыл бұрын

@@dundisdundat7022 For some reason some of the pilot assist options are enabled ...means your fighting the copilot sometimes. Go to the assistance options and ensure all pilot assists are off.

@10CrazyGlue Жыл бұрын

Any idea why not all of these button mappings work when in a different single engine aircraft? Example being if I'm in the Beaver & I press POV-1 LEFT (inside cockpit) it goes to 45 degree angle left view & if I press it RIGHT it looks behind. All external quick views work fine.

@SimHangerFS Жыл бұрын

This is a modified view created by the developer specifically for that aircraft.

@10CrazyGlue Жыл бұрын

@@SimHangerFS thank you