The most specific video ever, but precisely the one I needed as I was having vlan issues. Amazing video as always!
@dreagnore4 жыл бұрын
Glad to hear you are warming up to Mikrotik, it is a great brand to get into with a steep learning curve but probably as good as pfsense just a lot cheaper.
@AlexanderHansen14 жыл бұрын
Would really love if you had some reviews of Palo Alto, Fortinet or Cisco gear on your show. That’s what our customers use.
@maxali65914 жыл бұрын
Il love so much opensource technos 😉. It works so well. It worses it a lot
@DaveLucre4 жыл бұрын
Not sure if it's the same with XCP-NG, but with ESXI there's a limitation to the number of NICs you can assign to a VM, I hit that limit and needed to trunk all VLANs in via a virtual NIC. In ESXi you need to set VLAN ID 4095 for the Port Group in order to trunk ALL VLANs through to your pfSense VM's network adapter, from there you can then define all the VLANs you need inside pfSense against that NIC.
@throttlebottle59064 жыл бұрын
the limit is like 7 on single vm on citrix, so it's probably limited also.
@MrFunchess16394 жыл бұрын
Mr. Lawrence thank you for another excellent video. One question, is there any way to connect an monitor an UPS to the XCP-NG server so that the server could gracefully shutdown the VM's?
@HijmenSchilperoort4 жыл бұрын
where/how do you handle the routing between vlans if you do not define them in pfsense? or do you not have the traffic leave those vlans?
@CoreI510014 жыл бұрын
Hey Tom, I have a question regarding DNS names and HTTPS certs. I see a subdomain instead of the IP addres in the address bar on both the UniFi controller and Xen Orchestra. Did you do that by entering a subdomain in the control panel of your domain registrar for both and pointing them to your external IP. To then port forward the subdomains from Xen and UniFI to their internal IP addresses. Than with the HTTPS certs, do you have a wildcard on your lawrencesystem.com domain which will apply the HTTPS cert on all domains inside lawrencesystem.com? Thanks in advance for your time.
@jmccoy5554 жыл бұрын
Can you get 10g throughput on pfSense / FreeBSD on XCY-ng? Mine tops out around 2.5g out, in is full 10g, with iperf..... no issues with Linux, so have had to passthrough a nic to get around the issue which is a bit limiting. Any tips??
@Phil-D834 жыл бұрын
Can u do a video on setting up squid and squid guard in pfsense? Is there a free non self signed certificate we can use?
@LAWRENCESYSTEMS4 жыл бұрын
kzfaq.info/get/bejne/erR3lK2BspfdmoU.html
@tomRX48784 жыл бұрын
Ok I get it with xcp-ng and virtual pfsense. But on the physical pfsense you have VLANs defined, right? Or better question: When I have a physical pfsense with only one WAN and one LAN then I must define VLANS in pfsense, correct?
@KuroganeX33 жыл бұрын
Hello, I watched video 2 times whole and he mentioned there that he doesnt propagate any VLANS on his main pfsense. he has set DHCP and he runs it "allVLANS" on port. as he does not want Pfsense to handle VLANS 3:40 min.
@LinuxRacr3 жыл бұрын
My question is can your physical pfSense router give dhcp leases to virtual machines on your XCP-NG hypervisor that are not on the native VLAN? I've been having trouble with that.
@LAWRENCESYSTEMS3 жыл бұрын
Yes, it does work
@LinuxRacr3 жыл бұрын
@@LAWRENCESYSTEMS Not sure why not for me. I have the port going into my XCP-NG server having all VLANS. The native VLAN (1) DHCP from my physical pfSense gives IP's to machines that are on the XCP-NG no problem. I even have a virtual instance of pfSense that sucessfully sees the unmanged VLANS I've configured as virtual interfaces, and that works just fine. When I create a network in my pools configuration with a VLAN managed my my physical pfSense machine, and then create an interface on my virtual machine from that network/vlan, the DHCP IP is not given to the virtual machine, even after reboot. Yes, DHCP does work from said VLAN to other infrastructure. Not sure why this is the case.
@LinuxRacr3 жыл бұрын
So I found my issue. I had two ports in my switch that were mislabled. I traced them down to find that I had given my trunk to the wrong port. It works like a charm now.
@jcmichel57684 жыл бұрын
I have Pfsense running on its own machine. Is there a way for Pfsense to reboot after a power outage?
@Dylan-xc8yz4 жыл бұрын
Try the system BIOS for a power off event
@ronald01224 жыл бұрын
i have a intel nuc with esxi installed. can i create a new vm with pfsense and use it? i only have 1 networkport though
@tcc57504 жыл бұрын
Is it pronounced "Micro-TIK" or "Me crow tik"? I always thought it was the former not the latter.
@Dylan-xc8yz4 жыл бұрын
Sometimes I read it as "my-crotik"
@JeDeXxRioProKing4 жыл бұрын
OH New Posted vid from tom ? Wait a minute LIKE it , make a comment