Have some nice wireless headphones that you'd like to use with your PlayStation? Well you can! Here's how...
---------------------------
Link to adapter: taplink.cc/techoverflow/p/wir...
Troubleshooting video:
• Adapter No Sound (Play...
Music by @aykid5798
---------------------------
here's how you can connect almost any
00:00:01.719
Wireless pair of headphones to your
00:00:03.919
Playstation this works for both PS4s and
00:00:06.799
ps5s you may have started off by trying
00:00:09.320
to connect it through the Bluetooth
00:00:10.840
built into your PlayStation however if
00:00:13.040
you did this you were met with a message
00:00:14.799
letting you know that it's not
00:00:16.079
compatible it wouldn't even let me
00:00:17.760
connect Sony brand headphones to my PS4
00:00:20.960
so then how do we get around this for
00:00:23.080
this you are going to need this $7
00:00:25.039
adapter right here I'll leave a link to
00:00:27.000
this pinned in the comments Inside the
00:00:29.039
Box you get two things the first one is
00:00:31.160
a little microphone you need to plug
00:00:32.719
into your controller because
00:00:34.280
unfortunately you can't use the built-in
00:00:36.480
mic to your earbuds or headphones the
00:00:38.960
other thing is a little USB device that
00:00:41.079
you need to plug into your PlayStation
00:00:43.360
once you have this plugged in it will
00:00:45.039
immediately start to flash you want to
00:00:47.120
wait for it to flash about five
00:00:48.760
different times before actually moving
00:00:50.600
on just to give it some time to boot up
00:00:52.960
after it's flashed five times you can
00:00:55.160
then hold down the button on this
00:00:56.760
adapter for 3 seconds this will change
00:00:59.359
the light from flashing slowly to
00:01:01.120
flashing rapidly this means it has now
00:01:03.199
entered pairing mode now you want to go
00:01:05.159
over to your headphones and enter them
00:01:07.000
into pairing mode you can do this on
00:01:09.040
most headphones by pressing down and
00:01:10.960
holding the power button once it's
00:01:13.159
turned on you then want to keep holding
00:01:15.040
it until it enters pairing mode you can
00:01:17.640
tell it's entered this when the light
00:01:19.240
starts flashing like this once it is
00:01:21.520
entered pairing mode you can then go
00:01:23.200
ahead and release the power button and
00:01:25.280
just make sure you keep it in range of
00:01:26.960
the adapter now just give it a few
00:01:28.799
seconds and it should automatically
00:01:30.680
connect you know it will have
00:01:32.320
successfully connected when the adapter
00:01:34.280
turns solid blue and the headphone LED
00:01:36.799
stops flashing rapidly