This woman explains everything very clearly!!! she sticks to the meet and potatoes without telling stories or other bla, bla, bla that confuse you!!! She reminds me of military instructors...

Finally , someone who explained it clear enough to understand. Thank you.

*Great **Generater.Systems** so far. We have the same brand just a little less power. This one is so much quieter then our first one. Great buy*

What an ANGEL! She helped me troubleshoot why my connection wasn’t working. Probably spent about an hour with me until all was well. I can’t say enough about this amazing person. Excellent explanation that ANYONE can do.

We just got our van and as I have been studying electrical options I was really confused on how I could just get the Bluetti and run all my DC stuff off of it. A wealth of information on a short concise video. Thanks so much @Jonnie’s Journey. Your other videos about the wall plugs were just as helpful. Now let’s see if I can pull it off!!

You’re heaven sent! Thank you for this valuable information and I just subscribed to your channel. You have a new fan.😀

Awesome video and a massive help thank you!!

Loving all this great info 👌🤙

Just what I needed, much appreciated

Thank you so much for this! ❤

Thanks

Thanks for the info

This is much easier than another Video i saw of how to hard wire the Bluetti.

I swear I have scoured the internet trying to figure out how i would connect a fuse block to my bluetti eb150, so thankful for this video!!

I’ve been looking for a video like this for WEEKS!! THANK YOU!!!!!! 👏

Great video

excellent tutorial and badly needed info Thanks Jonnie for the simple way you explained even for the technically challenged.

This is exactly what I was looking for - thank you!

THANK YOU!!! FINALLY someone to explain it in layman’s terms. You like rock and stuff. 🥰

Thank you for making this video!!!! I was seriously losing my mind trying to figure out how to do this.

Thanks you made it easier for the rest of us.

I have been contemplating doing this very thing so I can switch up my power sources - yours is the first video I've come across that addresses the subject. Thank you!

Thank You SO MUCH for this. I'm planning for a similar setup but was struggling to find clear info connecting to a 12V fuse panel. This was so clear! XT-90's on order!

Very helpful. I am going to install this on my RV using my Bluetti AC200P. Thank you!

THANK YOU SO MUCH you are great. Everyone else talks like electricians to electricians. This results in every listener saying, this is not for me, I don't understand, I might make a mess.

This is a wonderful video. I’ve been watching videos that were pretty useless. Thank you!

Thank you Jonnie, very useful information, with these detail I have now ordered the components to build the "Output" cable (2 pin SA20) and also make the quick connect to a distribution box for 6 wires. And ya your correct there are very few videos bridging this gap of details,,,, everyone is too busy doing "unboxing" and "reviews" rather than real world usage. Thanks again,,, you're a star! Edit: I love my AC200P & EB240

love it that was fantastic I've watched probably hundreds of solar videos this one made the most sense I could understand

You explain this so good. People wouldn't have any trouble following along with you👍👍💓

Thanks for this video! Just got an OvrLnd camper and am building the interior. I bought 2 Bluettis to take of my power needs and found your video easy to understand!.

As unbelievable as it might seem even I understand this. As you know that is quite a feat🤣 Great job explaining this process!!

bestie I have been searching youtube for a video on how to do this for HOURS. I am sooo grateful this is so helpful thank you

Extremely helpful! And exactly what I've been looking for!

Finally.. Thanks!!!!

I've been searching for someone to tell me how to how my Bluetti up to my backyard studio (using the solar panels) with no luck! Including the company, they never responded to any emails or voice messages. Thank you so much for this!

Good stuff 👍

I've been researching the process and expense for a DIY campervan. Admittedly, the electrical part makes my head spin so much that I'm getting quotes to outsource this step. Your video made it easier for a newbie like me to understand. Thank you!

Thank god! So glad I found you on here. Thanks for sharing

You are the ONLY one that has made this clear enough to get the correct parts to connect a Maxxair fan etc to my AC200P. thank you soooo much.

Thank you. That is simpler then what I ended up doing. I may rewire to clean things up.

Great job!!! If I ever install one I'll just bring it to you!! Thanks for sharing!!!

This was extremely helpful! I was hoping there was a way to do this and this was a fantastic tutorial. Can’t wait to give it a try!

😊 lived ot I miss fishing 🏕 soon n very soon the smell of a nice fire when cooking ty for sharing your journey

I absolutely love your organization and set up so much. I’m just like you with needing that, everything crisp and clean and tidy. 💯💯💯👍👍👍👍😃😃

One of the best Bluetti videos with useful, practical info. Thanks!!

Great video, it's still all over my head if I have to figure it out, but glad there is a community if I have to ask! Nate

Wow, this video was VERY helpful, Jonnie! You're a natural teacher! Thank you for all the clear and concise info and special thanks for all the links to purchase the materials.

thank you so much for this!!! by far the most helpful video I've come across!!! Believe me, days, perhaps months of searching! Cheers!

You know your stuff when it comes to this. Merry Christmas.

Yay 😁, it finally came!!! Great how to video. This should be a huge game changer for you! You can be even more stealthy now.

So cool glad we both have Bluetti. AC200s. You made it very understandable thank you thank you. I have a little KZfaq Channel on different things I’m using just to get ready to go on the road in the future. Now if I can figure out what I can use in my Subaru out back to generate the electricity from solar. That doesnt cost me an arm and a leg. 💕💕💕

I have been searching for information on wiring my 12 volt appliances. Thank you for the great info!

Thanks for this!! I've seen tons of videos that have left me more perplexed than anything. This was explained very well, short, sweet and to the point! This is exactly what my brain needed to 'click' for an upcoming upgrade.. Thanks again, well wishes!

Bob just got a Bluetti too for those times when we don't have electrical hookups or when we might lose power. You really explain your application for it very well. Thanks for sharing. Debbie - BluWave Odyssey

Thanks for sharing and explaining it the simplest way a DIYer woman like me , now I have a clear idea how to do my electrical build . Some vloggers explain this vaguely. Unless you’re an electrician one word says it all. But us women have no clear idea on electrical hookups

You break things down so simply. It’s a breath of fresh air. Helped me with the swivel seat in the Chevy and now this for when I get my Bluetti. You’re a gifted teacher! Thank you!

Great video! Very helpful information.

Yes so awesome! I have the kodiak but waiting to get the flex!

Great job...showing those of us technology challenged in case we need to do one later.

Thanks for sharing this was exactly the video I’ve been looking for. You’ve helped a bunch on how to operate your wired van from a solar generator. Very useful/informative video. 👍👍👍

Thank you so much for this! This is exactly what I'm trying to do but I don't know anything about electrical systems. You are a life saver!

This this is wonderful! Thank you. I have a Goal Zero Yeti and can barely find videos. Although it’s not necessarily the same ends but it helps me understand. There are not that many videos out there of it.

Thank you Jonnie! I'm definitely going to use this setup. Nice and simple.

About time someone made this video. Thanks. I ordered a similar Block the other day.

Excellent video! I've converted my camper from the old house battery to LiFePO4. I also happen to have a battery generator, and I wondered if eventually I'd rather do something like this. If I was building from scratch, your design is exactly what I'd do. I think too many RVers and van lifers are focused on using devices that require an inverter. My plan is to stick to 12v exclusively. Laptops can even be powered by 12v with the right adapter.

Thanks for the easy to understand video. Definitely still relevant.

OMG, I was wondering how I could wire all my DC needs using the Bluetti and now I know. Thanks so much for this video.

Thank you so much for creating this video!

Great video; thinking of getting a cargo trailer and I’ve been searching for info on this exact subject; thank you and great job.

Thank you soooo much for this! I’m just about to the part of my build where I need to figure out my electrical system. I bought my rig (skoolie) semi-built out and it came with solar panels and this same exact BLUETTI. Considering it’s price tag I really wanted to be sure I could wire some 12v/fuse block into it! This single-handedly alleviated a major stressor in my build. THANK YOU!!!

Thanks for the info!

I'm so glad I found this video. this is the set up I need. Thank you Thank you Thank you!

I justed wanted to say thank you for your video. After looking all over the internet, apparently I talk to Google just right ! & your video popped up! & I'm already subscribed to you! Thanx for the putting out the video with the answers I needed. Safe travels 🙂✌

You make it easy to understand! Thank you!

Thank you 😊....I can't tell how much I needed this . God bless you 😇

Exactly what I've been looking for, great vid thanks for that.

Great info Jonnie💚🐈😎👍💛

Nice! This is exactly what I was looking for.

This is exactly what I needed. Thank you so much.

Thank you so much!! You are an awesome teacher, and I will be watching all your videos throughout my electrical build!!

Excellent job and Merry Christmas to you and Kelly and families...

There are great reasons for wiring up a fuse panel to a portable power station. Love that you covered this in your video. In our van, we enclosed our fuse panel in a larger plastic enclosure and then added an Anderson Powerpole connector to the front. Our Bluetti or Jackery then connects up simply to the enclosure. We also added a SAE exterior port to the van for our portable solar. It is then wired to the same location as the enclosure, making it easy to connect to the input of our power station. Clean and Simple!

Thanks, Jonnie. That was straight forward and well presented. I always use ring terminals too. I use the bare ones and always solder the connections then use heat-shrink tubing. I don't trust crimps especially when there's vibration involved. I'm trying to catch up on your older videos now. Just sane... :^) Saint

Good insruction! Merry Christmas!!

Thank you! This video was very helpful.

Great simple video, thanks.

Very well done. Merry Christmas!

Great tutorial. Surely everyone would be able to follow this.

Great Job, This was very helpful. Thank you!!!!

that looks very snappy.

Great information, thanks.

I just started watching your videos yesterday. I love all the information you are providing. I have a van and all this stuff purchased but no experience. I already purchased a 2000 w inverter, charge controller, 30 am power plug, solar, and converter. Thinking of selling all that and getting the bluetti because it seems easier. Thank you for the videos!!

Thank you so much!! I have been looking for hours for this explanation :)

Excellent! Thank you so much?❤

Great explanation 👍🏻

I think this will definitely help somebody! Great tutorial! 😊

Awesome idea, thanks! 🖖😜

I love your tutorials Jonnie, good to the point and easy to follow! Thank you!!

You do such a good job of explaining and teaching. Thank you. 🥳 Happy new year. May it be better for everyone.

Clear and precise information. Good job!