Control Bot Domination, or Destruction? NHRL August 2023 Recap (SSP)

  Рет қаралды 4,960

Team Just 'Cuz Robotics

Team Just 'Cuz Robotics

Күн бұрын

Пікірлер: 32
@spinnirack3645
@spinnirack3645 10 ай бұрын
3 SSP kits making it to the top 16 sounds like good advertising to me
@T3hJimmer
@T3hJimmer 10 ай бұрын
The fight with Nitro Hornet was great. He looked strong, then you almost finished him off, then he blew off your top plate, then he lost a wheel. I was on the edge of my seat the whole time. 10/10
@Eric_Wolfe-Schulte
@Eric_Wolfe-Schulte 10 ай бұрын
I like the voiceovers
@JustCuzRobotics
@JustCuzRobotics 10 ай бұрын
Glad to hear it, this is the first time in a long time I have tried adding VO during fights. With so many fights the video would be too long with commentary only after the fight I think.
@Eric_Wolfe-Schulte
@Eric_Wolfe-Schulte 10 ай бұрын
⁠being able to see what you're talking about when you talk about it is great! ... Professional driving.
@nightrider5420
@nightrider5420 10 ай бұрын
I agree on the voice overs 100%. Big shout out from the Framingham Makerspace!
@GrumpleBots
@GrumpleBots 10 ай бұрын
When I watched it live I thought Crashfest won, but watching it back it could have gone either way. It was one of the best fights of the event and both bots looked great.
@astarrobotics
@astarrobotics 10 ай бұрын
My fight with SSP was awesome! I will pull off an SSP wedge someday. I still am not 100% sure what happened with my drive. The motors were intermittent for several of my fights. When I got home from the event I drove the bot into a wall for about 10 seconds (stalling the motors) which killed one of them for good. I'll be switching to Gecko drive motors and hoping that fixes the issue. -Aidan with Radix
@JustCuzRobotics
@JustCuzRobotics 10 ай бұрын
Always happy for a rematch!
@user-qo3sw3kh2q
@user-qo3sw3kh2q 10 ай бұрын
These are the kinds of videos that I wanna wake up to every day?😊
@thefa11en12
@thefa11en12 10 ай бұрын
Great video! Your videos have helped me quite a bit and im excited to see subtraction compete . Really enjoyed the voice over during fights instead of after ! Its also crazy how many control bots you went up against this tourney. Aggressive tapping 😂
@mattlantry8060
@mattlantry8060 10 ай бұрын
Pleasure as always to fight you Seth, I'll get you next time 😜. Can you have Ben say "hello everybody this is Ben from team just cuz robotics"
@miserablemosquito462
@miserablemosquito462 10 ай бұрын
Great video as always. Awesome to see SSP making it that deep into NHRL!
@matthewmcnaught9883
@matthewmcnaught9883 10 ай бұрын
Great video! Love to see these recaps
@JustCuzRobotics
@JustCuzRobotics 10 ай бұрын
Thank you!
@CREEMkitty7
@CREEMkitty7 7 ай бұрын
@@JustCuzRoboticsI was thinking about a joke robot about division called NOT DIVISION A badly taped down horizontal spinner lol
@LukeisKooL
@LukeisKooL 10 ай бұрын
Commenting now for the yt algorithm👍
@alexsalchemy
@alexsalchemy 10 ай бұрын
What an adventure! Great job!
@JustCuzRobotics
@JustCuzRobotics 10 ай бұрын
Thank you! Voiceover during fights seems to work well. It really cuts down on the video runtime to not have commentary separate from the fights and I like that it's more in the moment.
@alexsalchemy
@alexsalchemy 10 ай бұрын
@@JustCuzRobotics - Yeah, I think Carter Hurd pretty much nailed it in his Krave Monster videos. That's the style I'm trying to emulate.
@Drawliphant
@Drawliphant 10 ай бұрын
The damage you received from Nitro Hornet was way more minimal than I thought. I would dread fighting something like that but my bot isnt nearly as easy to repair.
@JustCuzRobotics
@JustCuzRobotics 10 ай бұрын
SSP was designed to be maintained by someone with no robot building experience so it's gotta be easy to fix! It took about 6 minutes in real time to repair the damage, that footage was sped up about 10X. As long as you have the parts needed it's super easy to work on.
@forceofwillgaming8475
@forceofwillgaming8475 10 ай бұрын
Funny story for you. I was actually on the panel for the SSP vs nitro hornet and the division vs dragonfruit fights. We had some confusion with the latter of the two but nothing like some of the other issues that happened that day. Which I’m curious to hear your opinion of those issues. Primarily the lynx event and chainsaw kitty vs hurt caboose. Can’t wait to see the new bot next weekend.
@JustCuzRobotics
@JustCuzRobotics 10 ай бұрын
I haven't seen the Chainsaw Kitty fight you referenced. The Lynx fight has been beat to death on Discord already tho. Ultimately I think the ref did their job the best they could, getting stuck on a light that has fallen is no different than getting stuck against the arena wall IMHO and shouldn't require special treatment. It sucks that Lynx got KOed that way even though Josh didn't want the win, but Josh's choice not to tap out before the countout ended sealed Lynx's fate.
@sleepyanimegirlclub
@sleepyanimegirlclub 10 ай бұрын
The one thing I think people missed from the Chainsaw Kitty v Hurt Caboose fight, as it wasn't shown on the stream, is that Kitty was still able to move using her weapon while Hurt Caboose was completely dead due to it's power switch being removed. I'm not convinced I 100% won that fight, but I think knowing that difference in damage makes it a closer fight than it appeared on stream.
@nightrider5420
@nightrider5420 10 ай бұрын
SSP is looking great Seth and it sounds like you have quite a few friends cheering you on also. Hope to catch you in RI next time. By the way are the screws on your wedge counter sunk? I couldn't tell on my phone.
@JustCuzRobotics
@JustCuzRobotics 10 ай бұрын
They aren't because counter sinking AR500 is sortof a nightmare. It's possible but requires specialty tools
@nightrider5420
@nightrider5420 10 ай бұрын
Ahh I see. I use 1/4" AR500 for plinking plates at the rifle range and it takes hit from a 226 round without hardly even distorting. Good luck and keep the hits coming Seth.
@BenStrano
@BenStrano 10 ай бұрын
@@JustCuzRobotics Razi countersunk our with those harbor freight glass bits. I showed him one, told him to be patient and walked away thinking it would take forever. He was done in less than 5 minutes.
@notdanroth
@notdanroth 10 ай бұрын
I don't think the judges could have been wrong about ssp v crashfest. Very equal matchup
@FireMageTheSorcerer
@FireMageTheSorcerer 10 ай бұрын
Longer forks for SSP, you think?
@JustCuzRobotics
@JustCuzRobotics 10 ай бұрын
Maybe. It's a super simple change to make
Will My Robot Survive the Ultimate Test? SSP at NHRL January 2023
47:10
Team Just 'Cuz Robotics
Рет қаралды 12 М.
Pringle Can Rockets! - My best worst idea yet
19:41
Turnah81
Рет қаралды 310 М.
WORLD'S SHORTEST WOMAN
00:58
Stokes Twins
Рет қаралды 50 МЛН
A teacher captured the cutest moment at the nursery #shorts
00:33
Fabiosa Stories
Рет қаралды 45 МЛН
НЫСАНА КОНЦЕРТ 2024
2:26:34
Нысана театры
Рет қаралды 1,1 МЛН
Can My Custom Weapon Motor Survive? [Mass Destruction 2023 Recap]
20:49
Team Just 'Cuz Robotics
Рет қаралды 12 М.
February 2021 Norwalk Havoc Event Recap: Division (3lb Beetleweight Combat Robot)
37:22
We built a BattleBot. It's terrifying.
19:24
Strange Parts
Рет қаралды 1,4 МЛН
Adam Savage Reacts to Hacksmith's Newest Lightsaber!
14:35
Adam Savage’s Tested
Рет қаралды 1 МЛН
The best moments from our 2022 March event
9:05
NHRL
Рет қаралды 26 М.
My DIY Submarine Explores A Sunken Uranium Mine
19:23
CPSdrone
Рет қаралды 607 М.
Is SSP Still Good Enough in 2024? AniMAYHEM 3lb Robot Combat Event Recap
38:15
Team Just 'Cuz Robotics
Рет қаралды 2,9 М.