Control the Akai S950 or S900 Filter with MIDI

Рет қаралды 4,488

Жыл бұрын

Here's a little 'work around' you can use for the Akai S900 / S950 Sampler that enables you to control the lovely sounding filter via MIDI.
'Download ready-made' Kits for SP1200, MPC & ASR now from TONELAB!
tonelab.merchi.co/products
** For best results watch FULL SCREEN in 1080p HD **
Check out the comprehensive S900 tutorial on the parent channel here:
• How to use the Akai S9...
Ever seen a 'Loop Calculator' ?! ♻️🤓
Well, there is now for the S900/S950 and many other Samplers FREE
to use via the TONELAB website: tonelab.tv
Subscribe, drop a line or check out more Tonelab pages 🤙🏻
instagram @tonelab
facebook @tonelab.tv
#akai #s900 #sampler

Пікірлер: 43

@HOLLASOUNDS 11 ай бұрын

Cool looking device a real classic.

@PavelGoncharovJr 6 ай бұрын

Thank you!

@parisgraphics Жыл бұрын

Man thank you! I've been using a 950 for years and never thought of this. And setting the pad velocities on the mpc is brilliant. Much appreciated 🙏

@tonelabqt Жыл бұрын

Yeah cheers! ..it's been right under our noses the whole time.. kinda gives it a new lease on life 👌🏻🙏🏻

@plimx Жыл бұрын

This is gold

@olesolja1407 Жыл бұрын

I just tried this. Very useful. TL U Da Man…🔥💯😎👍🏾

@tonelabqt Жыл бұрын

Thanks 🙏🏻...yeah, it kinda breathes new life into that great sounding filter 👌🏼

@Wizkidmelburn Жыл бұрын

Love these tips for the s900/950…it’s my main workhorse….my only actually…

@lordvespatron Жыл бұрын

Wow! Great!! Cheers

@tonelabqt Жыл бұрын

'Download ready-made' Kits for SP1200, MPC & ASR now from TONELAB! tonelab.merchi.co/products

@monkeyflava1436 Жыл бұрын

Thanks bro, as good as usual

@tonelabqt Жыл бұрын

Appreciate it, thanks! 🙏🏻

@ghal3on Жыл бұрын

dope!!!!

@handehoch2299 Жыл бұрын

Uh... Didn't know that. Very cool!

@tonelabqt Жыл бұрын

🙏🏻

@ginsuthaironchef 9 ай бұрын

This is so dope. I’m going to try this. I’m trying to figure out how to assign midi notes on my Mpc X to control the key groups on my s950.

@tonelabqt 9 ай бұрын

You can do either / vice-versa.. as in.. Change the Keygroups to suit your MPC X's 'Pad-to-Note' allocations.. or, potentially.. you could even use a 'Keygroup' on the MPC X to just give you straight-chromatic notes. If you haven't seen the full Tonelab Tutorial for the S900/S950.. try looking up the Keygroup section in this clip 🙏🏻 kzfaq.info/get/bejne/rayUd6iExNPGqWg.htmlsi=fVoOvtaAJRivBQ1u

@ginsuthaironchef 9 ай бұрын

@@tonelabqt thank you! I’ve created a program before on an MPC 60, where I assign pads to the midi notes as they align with key groups in the s950. In the s950 I have Keygroup 1 assigned to midi note C0 24, Keygroup 2 assigned to C0# 25, Keygroup 3 D0 25, etc. In the MPC X I from the Home Screen I have Midi Program set to Program Chan 1, MPC X Port 1. I’m not sure where to go from here.

@tonelabqt 9 ай бұрын

Ahh.. yeah, it's a little different on these 'new gens'.. rather than use a Program, you can use a MIDI Track (from the Main Screen.. on your 'Track' panel... the MIDI icon). Once that's selected, you can press the 'Pencil' icon on the, lower, MIDI Program tab.. and hit 'Edit Pad Map'... then it's just a matter of setting your 'MIDI PORT', which is also found on the MIDI Program tab (bottom of Main Screen).. and then, configure your MPC X's 'Pad-to-Note' triggers.. as configured, in your 950 👍🏼

@olesolja1407 Жыл бұрын

🔥💯😎👍🏾

@brewhazerker Жыл бұрын

hi , thanks for this cool tricks ! i have a question , with an mpc(60 or 2000) it's possible to use multi level (volume ,or pitch) on the s950's samples ? thanks !

@tonelabqt Жыл бұрын

Yeah! ..that's pretty much how I set it up.. 16-Levels and then select 'Velocity'. You don't necessarily need to have the Filter Sensitivity on Page 10 cranked up to 99.. I just put it there as it provides the maximum 'Filter Range'. You could drop that down to 75 or 50 too, so experiment with that too 👍🏻

@kannon3979 Жыл бұрын

If possible can you make a tutorial about the AKAI S3000XL?

@tonelabqt Жыл бұрын

Yeah of course! ..I've got one here, the only thing is, the screen is getting a little blurry.. so I've got to try source a new screen first 🙏🏻

@swpenguin Жыл бұрын

I really look forward to this!

@grzegorzzielinski6574 Жыл бұрын

OMG, that drum was used by Gus Gus in Believe!

@leedza Ай бұрын

More famously Jade - don't walk away

@Paul58069 Жыл бұрын

The filter in the S900 is aftertouch sensitive. Just assign some midi controller knob or wheel to aftertouch, and you can control the filter in realtime without retriggering. My pleasure ! Now send me money :)

@tonelabqt Жыл бұрын

Sounds intriguing! ..but, the only thing, I can see, where the 900 responds to AfterTouch is the 'LFO Depth'. So, which page are you referring to exactly?! I'd love to see this! 🤔👍🏼

@Paul58069 Жыл бұрын

@@tonelabqt there is a slight possibility that I have mixed up the S1000 and S900 on this. It's been over 20 years you know. Give it a try. I cannot. My studio isn' t up and running anymore ....

@tonelabqt Жыл бұрын

@@Paul58069 Right.. yeah, on the 1000, totally doable.. the 900 though? AT (& MW for that matter) will only apply LFO Depth 👍🏼

@Paul58069 Жыл бұрын

@@tonelabqt My bad, Tonelab :)

@Paul58069 Жыл бұрын

@@tonelabqt Idea: very slow LFO en then turn up the mod with modwheel ? Just thinking out loud ...

@bizon33obroty Жыл бұрын

Do you think it would be possible to control the filter in S900 using qlink in MPC4000? As far as I remember you can assingne something like PAD CONTROL VOLUME to the knob. I'll check that later on. Really nice tip!

@tonelabqt Жыл бұрын

Unfortunately 'no', not specific to the 4000, it's just that there's no 'support', in terms of MIDI implementation in the 900 to harness the filter. But, if you put your MPC into '16-levels-mode' and choose 'velocity'.. you'll have 16 variations of velocity.. which is pretty much what I did in this clip 👍🏼

@bizon33obroty Жыл бұрын

@@tonelabqt I see. Thanks for an explanation and sharing the knowledge.