Controlling a Cylinder with a Solenoid using a Hook-Up Starter Kit from FrightProps

Рет қаралды 70,828

8 жыл бұрын

A solenoid is an air control valve that allows for the electronic control of air entering a pneumatic solenoid. Using a solenoid valve and a controller, such as a PicoBoo, you can program and activate a sequence of movements using a pneumatic cylinder.
The FrightProps Cylinder Hook-Up Starter Kit includes all the required fittings and accessories to control most standard pneumatic cylinders.
We offer two kits:
Double Acting Cylinder Hook-Up Starter Kit:
www.frightprops.com/cylinder-...
Single Acting Cylinder Hook-Up Starter Kit:
www.frightprops.com/cylinder-...
Kits do not include power supplies or cylinders, but everything else you need to control a cylinder is included.
All kits come with 1/8 NPT fittings (other sizes are available by request).
What is NPT? NPT (National Pipe Thread) is an industry standard for pneumatic fittings. It can be confusing to people new to pneumatics because the NPT measurement is not the same as the outer dimensions in inches. For instance, an 1/8" NPT fitting actually measures 3/8" outer diameter. This document will explain more:
www.frightprops.com/faq/conte...
Additional Items:
We recommend every person who is working with pneumatics have a Tube Cutter and some Teflon Tape. You can get them here and thank us later :)
Tube Cutter - www.frightprops.com/tube-cutt...
Teflon Tape - www.frightprops.com/pipe-thre...
If you are interested in pneumatics, our FAQ section has a wealth of information!
www.frightprops.com/faq/categ...

Пікірлер: 23

@wqwwqwqqpoppopoo 6 жыл бұрын

Thanks for the vid! The single acting valve with a double acting cylinder is exactly what I needed but I had no clue what to search for.

@gizzmaster01 6 жыл бұрын

Can this set up be used for a crushing pop can? Thanks. And good vid

@darfinchen878 6 жыл бұрын

hey dude, i've seen your vids, but may i ask how does the cylinder is lubricated since i will run 24/7. thanks

@mandyconnell9495 6 жыл бұрын

how do you connect a motion sensor to the solenoid?

@nathangroulx 4 жыл бұрын

would this solenoid work if I hoked it up to a air compressor to the solenoid and out to a micro sprayer nozzle and on 110v

@Editman2411 7 жыл бұрын

When you activate the solenoid and the cylinder extends, is air constantly being drained from the air compressor/reservoir for as long as you have the trigger activated? Or does it only use the amount of air required to extend the cylinder? Hope this questions makes sense. Basically I want to have a prop fist print into fabric and Im unsure if by leaving the solenoid activated it is going to drain my reservoir. I'm a newb ...sorry for the lame question.

@FrightProps 7 жыл бұрын

Not lame at all Paul! It will just take as much air as it needs to extend the cylinder (so it won't continue drawing air).

@Editman2411 7 жыл бұрын

Sweet thank you!

@TrungTheMaker 6 жыл бұрын

How much psi can the cylinder handle? And what is your recommended psi level for a instant response to move a object that isn't heavy. I want to use a single action cylinder to move a medium sized sliding bolt on a door lock.

@FrightProps 6 жыл бұрын

Max PIS is 250 but most applications don't need more than 30-40.

@TrungTheMaker 6 жыл бұрын

FrightProps nice! Can you make a video demo of a piston running at 100 psi

@georgealbo 3 жыл бұрын

Dear sir, if i want to reject one pound on production line using pneumatic arm , how to calculate the needed Pneumatic arm,also i need rejection time (extend time of arm+retraction time)

@jiyuvelasco4246 6 жыл бұрын

we have a project and we need all the components that you have shown. may i ask if what is the size of your actuator sir? and what is the stroke.

@FrightProps 6 жыл бұрын

Many different bore sizes and strokes available here: www.frightprops.com/pneumatics/cylinders.html I believe the one used in the video is a 3/4" Bore 4" Stroke: www.frightprops.com/pneumatics/cylinders/stainless-steel-body-double-acting-universal-mount-cylinders/3-4-inch-bore-double-acting-universal-mount-cylinder-0758-0750.html

@muhammadirfan4931 8 жыл бұрын

hello frightprops, i want to make piston from pneumatic cylinder to make a mini car. what is the settings for pneumatics and valves to make a smooth rotation just as normal piston do?

@FrightProps 8 жыл бұрын

Hello. Pneumatic cylinders are really not meant to operate that way. As you can see in the video, they do not smoothly go in and out, it is more of a sudden, jerky motion. Not sure that would work or you.