Thank you so much for your comment! You make a great point. The 1x PCIe of the WiFi interface can create a bottleneck. So we may not get the full potential of the NVMe drive. But it performs significantly better PCIe 3.0 x4 than a SATA III SSD, especially for tasks with lots of small random reads and writes

Well. U can stick the wifi adapter at the back of your laptop...then connect it with USB 3.0 female to USB 3.0 male...

There are very small USB WiFi adapters, in case you need the M.2 upgrade, but remember WiFi interface is PCIe 1x, not 4x as NVMe M.2 SSD.

​@FROILANDRES I don't about how they use them, but m.2 E-key has 2 1x pcie lanes, and a usb 2.0 interface. I don't know what is thr use of the other PCIe lane, but the USB is used for Bluetooth in my wirles card.

Can you share with us that issue? Just curious

Great point! Remember that you're not going to get better speed than your USB buss can deliver. Also, I really recommend paying attention to heat dissipation because these SSD's run VERY hot and heat is the _major_ cause of early degradation of memory products.

Usb wifi dongles suck. Chances are if your laptop doesn't have a m.2 slot built in it really won't be that much better than a good ssd

The number of USB ports on laptops are quite limited these days. Some may only have two USB Type A's and maybe one or two USB Type C's. Dont seem the point of wasting a USB port to a dedicated wifi card unless your laptop has a soldered in Wifi card that isnt user replicable and hooking it up via the built in network card isnt convenient. A majority of internal wifi cards are user replicable but there will be some that arent.

Put it in your Bluetooth socket?

@@hicknopunk Usually they're combined on one module.

USB WiFi. Since WiFi standards are now ?? AX210 as of June 2023 ?? I can get WiFi thru a USB dongle. However, BlueTooth is more difficult because many USB AX units don't have BT built-in. Argh.

@@emwa3600 just plug an Ethernet cable and be happy...

It will be limited to one lane, but apart from that it will be just as fast (assuming the slot has equal PCIe version support, usually the case in non-embedded hardware)

@@BertoldVdb still faster than the most expensive Sata ssd right?

One lane of pci-e 1.0 or 2.0 is slower than SATA...

@BertoldVdb nope..the owner of the video said his write/read speed exceed 1gb/sec...just scroll down his comment and u'll find

@@farishakim6759 Then he has a pcie3.0 or better slot. One lane of that will of course easily beat SATA.

Yes, I did it successfully🙂

It's a waste of time, effort and money. If you need ultimate snappiness, you need an SSD with DRAM cache. Even your usual SATA 2,5" drive will then be snappier than your average NVMe SSD. Examples of SATA drives with DRAM cache are the Samsung 870 Evo and the Crucial MX500 series.

​@@sassuki Damn you really do not know what your talking about

@@sassuki Both Samsung 870 Evo and Crucial MX500 have unusually high failure rate withing 1-2 years. Quality is not what it used to be, thanks to globalization.

@@ExtaTer I have an MX500 that is 2 years old in my PS4, runs like a charm. It has a 5-year warranty anyway so, it shouldn't be a problem. I do backups of save data on a regular basis just in case. And I just bought a brand new 870 EVO for my PC, which is just a boot drive, so it doesn't matter if it fails either as it does not need any backup, and it also has a 5-year warranty.

@@sassuki I was talking on average, not your case of 1. All "warranties" nowadays are horrendous - you will jump through hoops, pay for shipping possibly to outside US, and wait for months for a refurbished drive. Pray you will never need to use the "warranty".

Thanks, Bro! Yes, I migrated my previous ssd to the new M.2 NVMe, which is bootable. I just set bios settings like the below video, and it works very well; kzfaq.info/get/bejne/j6ing8SIq6vco4U.html

@@techwise66 more thanks to you bro. I'll try myself as I hope. Your videos will guide me like Bible. Best of luck!

Yes, I used it on my laptop, and one of my friends tried it on his laptop, and both results are working

My laptop directly recognized 2.5" SSD, but I didn't have an M.2 NVMe SSD slot. So this way, I could plug M.2 SSD into my laptop. All the bios adjustments are in the below video; kzfaq.info/get/bejne/j6ing8SIq6vco4U.html

To solve your issue, you can use an M.2 to PCIe adapter that has both an NVMe and Wi-Fi card slot. This way, you'll be able to use an NVMe drive and replace the bad Wi-Fi card without having to solder anything. Just ensure your laptop has a spare M.2 slot and that the adapter is compatible with your laptop

From what I know PCIE Gen 1 is not compatible with NVMe, only SATA. PCIE Gen 2 is known to have issues booting off of NVMe drives, but it's a case by case scenario.

booting from nvme usually is only possible if the systems BIOS/UEFI supports NVMe Boot.

Opencore (yes, it's meant for installing macOS on Windows PCs) allow you to boot NVMe SSDs on many older devices that do not natively support NVMe booting.

@@rmendez011 CloverEFI can do the same.

Yezza...wifi6 adapter.

Yes, brother, I can close the laptop cover. The thickness of the adapter is very thin, I mean mm level. And the adapter can be broken based on your ssd size, which is 2230 for me. So I cut it to 2230, which fits my laptop motherboard.

Thank you for pointing that out! 😄 You're absolutely right. Nerds like us thrive on those details. I'll make sure to include data transfer rates in the upcoming content.

Thank you for your comment! NVMe SSDs are much faster than eMMC because they use the PCIe interface, which has much higher potential throughput. The number of PCIe lanes connected to an NVMe SSD can affect its maximum performance. A typical NVMe SSD with 4 PCIe lanes can reach higher speeds than one with only 2 lanes. Based on my research, A+E key M.2 slots may be limited to 2 PCIe lanes, meaning any NVMe SSD that is installed in such a slot will have a maximum bandwidth that's roughly half of what could be achieved with 4 lanes. Practically, an NVMe SSD on a 2-lane connection might achieve read/write speeds near 1,900/1,500 MB/s. In contrast, a 4-lane NVMe connection might allow for speeds closer to 3,800/3,400 MB/s or more, depending on the SSD's specifications and the PCIe version.

Thank you so much for your comment. Be careful to have an M2 A.E Key on your board to use the graphics extension cable. The adapter below may solve your request more than the adapter I mentioned in the video. It is a different purpose to use M.2 NvMe SSD. www.aliexpress.us/item/3256802884482879.html

In my instance, I did not need to update my motherboard bios in order for the M.2 NVMe SSD to be recognized. The BIOS settings are available in this video; kzfaq.info/get/bejne/j6ing8SIq6vco4U.html

It supports M Key NVME SSD (2230, 2242, 2260 & 2280 sizes), and it doesn't support SATA-based B key SSD. I didn't encounter any limitations until now, and it works very well.

@@techwise66 In the Boot menu on the bios this port recognised as bootable or it takes it only as a 2nd drive only for saving?From the other side of the port you can still connect the WIFI card??

@@Drumsholic It can be used as either a bootable or a second hard disk. You may find my bios in this video; kzfaq.info/get/bejne/j6ing8SIq6vco4U.html I use the internet with the ethernet cable, but you may also take a USB wifi

The "A/E" key and "E" key slots have different pin configurations. The adapter that I show in the video is designed for an "A/E" slot and may not fit into an "E" key slot alone. I think you should check for a different adapter for your motherboard.

I bought it in Aliexpress and put the converter link in the video description. But I think your situation is different, so contact the seller or search for a different converter before purchasing

The adapter featured in the video is designed for Key A+E slots, whereas the Qualcomm Atheros AR956x wireless adapter typically utilises a mini PCI-E WiFi port. So, you'll need to get a different adapter compatible with the mini PCI-E slot. I am preparing a new video and will try to show the differences.

Thank you so much for your comment! I'm so glad my video helped you and I wish you enjoy the speed upgrade with your new SSDs!

​@@techwise66can my bios uefi still see the u.2 drive inserted in a u.2 to m.2 adapter even if it cant boot into the u.2 drive?

@@jirehla-ab1671 Yes, your BIOS/UEFI should likely see the U.2 drive. However, being able to boot from it depends on a few factors. First check if your BIOS/UEFI supports booting from NVMe drives. Update it if you have an older version. And at the same time, enter your BIOS/UEFI settings and ensure the U.2 drive is listed there and set it as the primary boot device. If your BIOS has legacy Compatibility Support Module (CSM), it may need to be disabled for NVMe boot. Finally, using a high-quality U.2 to M.2 adapter, especially for NVMe drives, can help avoid compatibility issues. Even if the drive isn't bootable, the BIOS recognizing it allows you to access the data through your operating system once booted from another drive.

@@techwise66 another way i could boot into the u.2 drive is by the efi shell, i have done it before on my external drive and it works

@@techwise66 maybe the reason why the high quality adaptera may have a higher chance booting is because of the adapter having a boot rom

Hello and thank you for your comment! Yes, it is generally possible to add WiFi and Bluetooth functionality to a desktop PC using the M.2 slot originally intended for storage, but there are a few important considerations to keep in mind. Slot Compatibility: Most modern desktop motherboards use M.2 slots that support both SATA and PCIe devices. For WiFi and Bluetooth cards, you'll need a slot that supports PCIe devices, as most M.2 WiFi cards use PCIe for connectivity. Your Gigabyte H510 motherboard should support this, but it's always a good idea to check the motherboard's manual or specifications online to confirm the type of M.2 slots it has and their compatibility. Keying and Form Factor: M.2 slots and devices are keyed to ensure that only compatible devices can be connected. M.2 WiFi cards typically use the A, E, or A+E key, while M.2 storage devices might use B or M keys. Ensure that the M.2 slot on your motherboard matches the keying of the M.2 WiFi card you plan to use. Hardware Support: Not all motherboards may support booting or device recognition for M.2 WiFi cards if the BIOS/UEFI firmware doesn't explicitly support it. Check your motherboard's documentation or contact Gigabyte support to confirm if your specific model supports using an M.2 slot for WiFi and Bluetooth modules. You can search for adapters that can solve your issue, such as "NGFF A/E-Key Wireless NGFF WiFi Card to M.2 NGFF Key-M" or "Wireless M.2 A+E Key Slot To M.2 M Key Wifi Bluetooth Adapter." However, ensure you check for compatibility and space constraints before purchasing any hardware. Good luck with your upgrade!

Thank you for your positive feedback on the video! The M.2 Accelerator A+E key and the M.2 Accelerator with Dual Edge TPU are solid options with their advantages. But the decision depends on your specific needs and priorities. If you value the convenience of using the Wi-Fi slot and don't necessarily require the extra TPU power, the M.2 Accelerator A+E key could be a choice.

Thank you for your comments. For your Dell Inspiron 3567, while the motherboard specification may state it supports up to 256GB SSD, in many cases, you can install a larger capacity SSD, like 1TB, without issues. Regarding the M.2 NVMe PCI 3.0 SSD, you would need a compatible slot or an adapter to make it fit. If your laptop supports booting from an NVMe SSD, you can install Windows on it. Replacing the DVD/CD drive with a USB Wi-Fi is not a direct swap, but you can use external USB Wi-Fi adapters if you want wireless connectivity.

​@@techwise66thank you very much! I'm going to buy it, and when it arrives I'll share the experience!!

Yes, after migrating my previous Windows, which was setup on my 2.5" SATA SSD, to M.2 NMMe, it works as it is and is bootable. You can see the video for bios properties in this video: kzfaq.info/get/bejne/j6ing8SIq6vco4U.html

Hi, if you mean to shift your wifi to an m.2 converter it would be worked

I got 1257,54 Read (MB/s), 1211,65 Write (MB/s) which quite higher than my 2.5" SSD

OMG cool, how about Asus Vivobook A442U. İ dont know what adapter i need to buy​@@techwise66

I am planning to do another video to show you more

@@techwise66 oh cool!

I didn't try this before, but it should work because we convert wifi slot to M.2 slot this way. It worked in the motherboards that don't have M.2 slot.

@@techwise66 No bro, I am not asking about converting an existing Wifi slot. I am specifically asking if we can add an additional M.2 slot in a laptop motherboard.

@@sivakumarb9749 I understand, Brother, now. I only found this method to add an M.2 slot to a laptop motherboard. But when I find any other alternative method, I will also share it at once.

@techwise66 I think you misunderstood his question...what he's asking is "is it possible to add additional m.2 slot although our laptop has only one m.2 slot (the wifi card slot)" In other words...is there any 2 in 1 m.2 adapter/extension out there?

I use an ethernet cable for the internet right now.

Of wifi. You can use your Bluetooth slot for the ssd.

Thank you for your comment! I received 1257.54 Read (MB/s) and 1211.65 Write (MB/s), which is significantly higher than my 2.5" SSD.

@@techwise66 nice!

My laptop is lenovo ideapad 520

Thank you for your comment! I received 1257.54 Read (MB/s) and 1211.65 Write (MB/s), which is significantly higher than my 2.5" SSD

My laptop model is lenovo ideapad 520

Thank you! Yes, I have already migrated my Windows 10, from 2.5" SSD to M.2 SSD, and it works as bootable as well.

@@techwise66 Many thanks for your swift answer. I will order the adaptor and give it a shot. Good luck with the channel and everything you do!!!

Works to you? I'll try to do the same.

@@AgendaBioBioCL Yes it worked very well for me

Yes, by this way, now it needs a USB wifi adapter to connect to the wifi

It is installed on different laptops and works very well. I am planning to record a new video to show step-by-step as well.

Hello! While I haven't tested this on an Inspiron 3576 i7 notebook, you should double-check some of your laptop's specifications before going. Check the compatibility of important components such as the WiFi card slot, motherboard type, and other relevant hardware parameters with the procedure outlined in the video. This will guarantee that the instructions are appropriate for your laptop

Thank you for your kind words and great question! Enhancing your system to accommodate and make the most out of four NVMe SSDs, especially with a motherboard that has only one M.2 slot, presents a challenge, but there are solutions. Since your motherboard has limited M.2 slots, you can use either the adapter that I showed in the video to convert a WiFi slot to NVMe or a PCIe adapter to add more NVMe SSDs. These adapters convert available WiFi slots and PCIe slots into M.2 slots. For a 3rd gen PCIe motherboard, ensure the adapter is compatible with PCIe 3.0 for optimal performance. It's a good idea to ask the seller for this information.

@@techwise66 :) I have ben doing a bit of research last year to see if I wanted a 4th gen. Just for got most of it. Turning the wifi slot on laptop to a functioning PCIe is awesome. I remember trying to make a expot adapter for a graphics card on my 12 year old laptop several years ago. Epic fail. >_

@@frankenstein3163 😊 It's great to hear about your enthusiasm and willingness to explore new upgrades and modifications, even after an adventurous attempt with your old laptop! The journey of upgrading and tinkering with hardware can be both exciting and challenging. Don't be discouraged by this type of past experiences. Keep researching, and and may it be a great success!

@@techwise66 :)

Yes, after I plugged in the M.2 SSD to my Wi-Fi port, I migrated all my previous Windows files and other folders to my new SSD and adjusted the bios. Then, I can boot my new M.2 SSD. You may find the bios details on this video; kzfaq.info/get/bejne/j6ing8SIq6vco4U.htmlsi=kjcy8mDxp-NaqyYu

Yes, it can be possible to use a laptop's WLAN card in a desktop, but you'll need a different adapter that I used in the video. A "Wireless M.2 A+E Key Slot to M.2 M Key Wi-Fi Bluetooth Adapter" may help to convert the necessary interface, allowing you to plug the laptop card into your desktop's M.2 M key slot

I didn't try it before, but I think you can. But you should find a different adapter than the one that I showed in the video. Please search for "Mini PCIE to NVME Adapter Mini PCIE to M2 MINI PCI-E to NVME Convert Card Riser Support 2230 2242 2260 2280 NVME PCIE M2 SSD". Before making a purchase, you may ask the seller about your motherboard

Thank you for your comment. I am going to do that.

​@@techwise66can please try to Asus Vivobook A442U? i hope u can do that. its help us a lot. thank u

I believe so. I reviewed the Lenovo ThinkPad L480 specifications on their website (psref.lenovo.com/syspool/Sys/PDF/ThinkPad/ThinkPad_L480/ThinkPad_L480_Spec.PDF). The WiFi card appears to be an Intel Dual Band Wireless-AC 8265, which uses an E+A key connector. Therefore, if the written specification covers your laptop, I think you should be able to use the adapter.

I have a built-in Ethernet port in my laptop, so I didn't need that, but it could be an alternative to using docking stations that include multiple ports, including Ethernet, USB, HDMI, etc., and can be connected to a laptop via a USB or Thunderbolt port

Thank you so much for your comment. There are some good Dual-Band USB Adaptors for wifi. This could be an alternative. I use the ethernet cable for the internet

Well, you need to find a good one and need to study the specs...look for wifi 6 AX dual band adapter. ..then you'll have both wifi+ Bluetooth

Lenovo IdeaPad 520, i7- 8550U, I migrated all data to new M.2 and it is bootable

Thank you! 👍😃

You can find out whether your PCI port supports NVMe by identifying the number of lanes (x1, x4, x8, x16) and the version of your PCIe slots (such as PCIe 3.0 or 4.0) without having to buy extra parts. The third-party program HWiNFO64 is available for free. This link will take you to a video that describes the software: kzfaq.info/get/bejne/htGKqqiczLPbgX0.html In the HWiNFO64, reach to the motherboard and under motherboard features find motherboard slots like in my case 4xPCI Express x1, and 1xPCI Express X4. NVMe SSDs typically require a PCIe x4 slot or higher.

I got 1257,54 Read (MB/s), 1211,65 Write (MB/s) which quite higher than my Sandisk 2.5" SSD

@@techwise66 my laptop is a Toshiba A75-P7100,i 7 with 32 GB of ram. I can have similar speed as you got when I installed another SSD in Raid Zero. I'm using this 17" Toshiba just for viewing KZfaq,for my work, I use my Mac Pro 2019 and my MacBook Pro M1.Thanks for your rapidly answer.

I assumed what you said is theoretical speed ...Like what is advertised and not real scenario, right?

@@Locky2701 are your SSD SATA or NVME?..cuz SATA max speed is only 600mb/sec speed and write.

@@farishakim6759 in Raid Zero mode,you'll get double the speed of a single SSD I have 2 SSD Sata in my laptop ,1 TB /each

Basically you would need PCI-E PCI-E bridge controller chip... I assume it will restrict the bandwidth usable for each card. Obviously you could split the USB and PCI-E pins and use one card that only use USB pins and another card that only use PCI-E pins.

@@Monni95 would the USB pins enable a M.2 card to act as a hub? So potentially providing the port for the termination of a USB network, which the standard supports up-to 127 devices.