Converting Server Power Supply For Programming BMW's: Part 2

Рет қаралды 7,657

2 жыл бұрын

Converting Server Power Supply For Programming BMW's: Part 2
I used a KD175 and this is a link to the PDF document i referenced: www.bimmerfest.com/forums/att...
Become a member and get exclusive discounts at www.ZeroTo60.com plus other unique perks and benefits:
/ @zeroto60tube
In Australia? Visit the Zero To 60 Shop! www.zeroto60.com
Follow our socials for BTS stuff and more car content
On Instagram: / zeroto60tube
On Facebook: / zeroto60tube
Business Enquiries: zeroto60tube@gmail.com
---------------------------------------------------------
0-60 and 100-200 Dragy timer: amzn.to/2IKMQr0
---------------------------------------------------------
Our Must Have Tools:
Car Trim removal set: amzn.to/3oQhsHe
Under bonnet led light: amzn.to/3aaDJLt
Electric Rattle Gun: amzn.to/380Eh41
3/8" Drive torque wrench: amzn.to/34aGzwy
1/2" Drive torque wrench: amzn.to/37gGUPZ
---------------------------------------------------------
Our Must Have Car Care:
Hybrid ceramic: amzn.to/2KlkMuP
Tyre shine: amzn.to/2WcRzox
XL microfiber dry towels: amzn.to/2IShFdC
Wash mitt: amzn.to/3oQM7UA
---------------------------------------------------------
Our Camera Gear:
Ultimate camera/gear bag: amzn.to/2Kj1N46
Action/vlogging camera: amzn.to/37eWawM
Non-vibrate suction mount: amzn.to/3a9vmjy
Wireless mics for in-car audio: amzn.to/3a8C1dH
---------------------------------------------------------
When we're not working on cars, we're watching the Grand Tour!
amzn.to/3qXghY4

Пікірлер: 41

@Nico_335i_DCT 2 жыл бұрын

Great job guys! That's a decent programmer power supply! Dutch regards, Nico.

@ChangoeMotorsport 2 жыл бұрын

Great experiment! I use one with diagnostic mode.

@davidholmes6936 2 жыл бұрын

excellent Andrew

@stevesas4744 2 жыл бұрын

Your meant to use 100w light bulbs to load inverter. That heat can can blow the inverter as it just turns heater element on and off to vary temp.

@stevesas4744 2 жыл бұрын

That red engine cover reminds me of the VL Turbo engine.

@fabini14 2 жыл бұрын

On my setup i just use cable for welding equipment, cheap and is capable of over 300A, with 140A they never use to gain heat. I have mY PSU at 14.6v, with 1.5m cable it drops to 14.2V, my e60 535d with ignition on when it run the fuel pump use over 75A, one some E series you will need over 80A, my recomendation is that you have 100A to be sure. Other option is to go junkyard and remove the battery cable from BMW for example, thay can take the power you need.

@chickenlittlesound Жыл бұрын

How I can find the quick connections for the cable?

@biglardyboy69 2 жыл бұрын

Not related to the power supply, (awesome job by the way 😊,) do you have any details on that air intake? Not seen that type before! Thanks!

@badazz12r 2 жыл бұрын

get non-cca jumper leads. F series needs 13.6 so you need 14v from the PSU to allow for voltage drop (F01/02).

@cerberus_ 2 жыл бұрын

Cool man make me one 😃

@andrasszekely9967 2 жыл бұрын

I understand why you would use 13.8V for bench programming but when connected to the car, I thought (based on the INPA / Bentley manual) that 14.8V is more appropriate. The supply seems capable of 14.8V and it would reduce the current needed for a particular load so, I was wondering if there a reason why you use 13.8V?

@stevesas4744 2 жыл бұрын

Did you turn the air con fans to full and run the water pump. Basically turn everything that can turn on with engine off.