Converts anything to IoT with ESPClicker and Home Assistant
Рет қаралды 43,315
Күн бұрынHi guys, this is a very simple ESP based IoT project that will allow you to integrate your normal devices such as a coffee machine, fan, etc, into your Smart home. "make them all IoT- enabled". If you like the project, please like and subscribe, This will help me keep working and sharing my projects. Thanks for watching!!
Sponsor of this video #
$5 off for New Users - pcbway.com/g/q4OV37
Shop: www.pricelesstoolkit.com/en/p...
Project Page on GitHub: github.com/PricelessToolkit/E...
Affiliate Links ###
Parts used in this video #
Power Supply 5v!!! 500-700mA s.click.aliexpress.com/e/_DFc...
ESP8266 Programmer s.click.aliexpress.com/e/_DF4...
PCB Test Clamp Fixture "6P Pogo Pin Minimum" s.click.aliexpress.com/e/_Dm3...
Pogo Pins s.click.aliexpress.com/e/_De0...
Cable 12P s.click.aliexpress.com/e/_DEX...
My Equipment #
Soldering Station AIXUN T420D s.click.aliexpress.com/e/_DEu...
Soldering Station AIXUN T3A - s.click.aliexpress.com/e/_Dmm...
Soldering Station AIXUN T3B - s.click.aliexpress.com/e/_DFD...
Soldering Hot Air + Soldering Iron - s.click.aliexpress.com/e/_9JasyF
Soldering Hot Plate - s.click.aliexpress.com/e/_A0NbsB
Reflow oven T-962A+ - s.click.aliexpress.com/e/_DDG...
PCB Holder - s.click.aliexpress.com/e/_9vAYir
PCB Cleaning Brush - s.click.aliexpress.com/e/_DCy...
Tweezer - s.click.aliexpress.com/e/_9A4JLl
Soldering Silicone Mat - s.click.aliexpress.com/e/_AtDNJH
Solder Paste - s.click.aliexpress.com/e/_9Qc90n
Soldering Wire - s.click.aliexpress.com/e/_A8JCLZ
Flux - s.click.aliexpress.com/e/_AlbMH5
Syringe Handle - s.click.aliexpress.com/e/_AWrOEX
Smart SMD Tweezer - s.click.aliexpress.com/e/_APXu9N
Transistor Tester LCR-T7 - s.click.aliexpress.com/e/_DmG...
Multimeter - s.click.aliexpress.com/e/_A281PV
Power profiling - www.nordicsemi.com/Products/D...
#homeassistant #smarthome #esphome
@PricelessToolkit Жыл бұрын
If you like the project, please like and subscribe, This will help me keep working and sharing my projects. Thanks for watching!! 😊
@JohnasLindell Жыл бұрын
Will mailbox guard be back in stock? Will there be a new video about it?
@PricelessToolkit Жыл бұрын
@@JohnasLindell Yes! But tomorrow I have serious surgery, and I will be recovering for a month. I will make a video later. production of mailbox sensors is ready, but I can't sell them, I won't be ready physically "for packing and shipping".
@JohnasLindell Жыл бұрын
@@PricelessToolkit Good luck. I wish you a speedy recovery.
@liestol 2 ай бұрын
Awesome device! The fact that you do it with an open source mindset makes it extra awesome. Great product and great video!
@PricelessToolkit 2 ай бұрын
Thank you!!!
@wjn777 10 ай бұрын
Great video. Cool product, thanks for sharing. I love how makers can add new functionality to old devices. Your videos are very well presented, clear, and the pace is perfect
@PricelessToolkit 10 ай бұрын
Thanks for watching!
@FranzStrasse Жыл бұрын
Perfect KZfaq educational video. Not too slow, not too fast, covers everything. Oh, and the ESPClicker is freaking awesome. You saved me from having to do it myself!
@PricelessToolkit Жыл бұрын
wow, thanks!! 😃
@FranzStrasse Жыл бұрын
@@PricelessToolkit We all know that there are billions of How-I-Did-It videos on YT and most of them are terrible. Yours is an example of how it should be done. You assume the viewer knows something and move on. @AndreasSpiess is another person whose videos are concise and to the point. And both of you manage it in English which I can only assume is not your mother tongue. I am fluent in German but could probably not make a comprehensible video in that language. I'm not even sure I could do it in English. I'm too lazy to do all the camera setups and editing. 😎
@PricelessToolkit Жыл бұрын
@@FranzStrasse Thank you very much for your words. when viewer writes such comments, I want to create more projects "with pleasure". By the way, I never studied English, I learned by watching films of the 90s "Before, the translation lagged behind by 1-2 seconds" 😄
@TheUnofficialMaker 10 ай бұрын
@@FranzStrasse And I would add Dronebot Workshop.
@raulgbcr 8 ай бұрын
Actually its normally easier to use the same ground of the pcb you are trying to control buttons from in your ESP and pull one of the buttons output to ground in order to generate a click, this is how this kind of buttons work and you can totally skip the relays doing this. This way also gives you the option of doing multiple clicks at very high speeds (as fast as the pcb microcontroller allows you) without any moving parts
@PricelessToolkit 8 ай бұрын
For the person who has knowledge of electronics, yes it is easier, but for many its easier to connect 2 wires without knowing which side is ground
@wojciechzielinski7825 Жыл бұрын
I've made something like that with optocouplers few years ago. What I've found very important in such thing is the ability to read diodes states.
@PricelessToolkit Жыл бұрын
Hi, yes, you are already the fifth person to say this. Thanks,!!!!! I didn't think about it, probably I will make a V2 😃
@wojciechzielinski7825 Жыл бұрын
@@PricelessToolkit definitely you should, but the project is great and with huge potential. If you want some ideas for other PCB's 1. esp with wired 3x LD2410 and powered by 5v usb charger - important part: cable extensions for sensors so you can wrap one room around with it. 2. refurbish old android phones to run without battery as room control board, with proximity sensor to turn it on or off (my projects that I cannot finish because of lack of time :( - so you will get at least one customer)
@PricelessToolkit Жыл бұрын
@@wojciechzielinski7825 Thank you very much! 🤗
@BrianRoy86 Жыл бұрын
@@wojciechzielinski7825does this mean the ability to read if the manual button was pressed on the coffee machine? If so this is exactly what am looking to do.
@wojciechzielinski7825 Жыл бұрын
@@BrianRoy86 Yes, bistable buttons, LEDs, limit switches. Necessary, for example, when you need to manage a device whose modes are changed with one button, but it has many informative LEDs, such as Sharp purifiers. Then you receive feedback on the current state.
@porksmash Жыл бұрын
Very nice design and thank you for open source
@PricelessToolkit Жыл бұрын
Thanks and welcome
@xtremeideaz Жыл бұрын
Great Project.
@PricelessToolkit Жыл бұрын
Thanks
@ericness9660 Жыл бұрын
This is really cool!
@PricelessToolkit Жыл бұрын
Thanks!!
@TristynRusselo Жыл бұрын
this is great! i was looking for something like this for my espresso machine. next idea: 4 relay outputs + 4 inputs to sense state of LEDs I want to make a 4 port KVM - "smart", I want to change any of 4 inputs, but also know which input is currently selected by sensing which 1 of 4 LEDs being "on"
@PricelessToolkit Жыл бұрын
Cool idea!
@DivinaFarms_James 6 ай бұрын
This might be perfect to make my hot tub smart and controllable through Home Assistant.
@PricelessToolkit 6 ай бұрын
let me know if you need help,
@jn_gutierrez Жыл бұрын
Excellent.
@PricelessToolkit Жыл бұрын
Thanks!!
@simonsayshomeassistant Жыл бұрын
Great videos mate!
@PricelessToolkit Жыл бұрын
Thanks!
@destinal_in_reality Жыл бұрын
Great project! I'd love to see your reflow oven modification if you have the pcb and software for that. Ive uaed a dumb reflow oven before but its a challenge to nail the profile perfectly
@PricelessToolkit Жыл бұрын
Yes, I feel your suffering. Give me 48 hours, I'll put everything I have on GitHub
@EmilePolka Жыл бұрын
I also use esp8266 as some sort of simulated switch press to some of my device, though the only thing I need is just a esp8266, some wires and a DIL reed relay (just buy 1 or more of it, depends how many buttons you want to control) after that its just programming with esphome and treat it as a standard relay switches. Now I have a smart eneabled device without the clicking noise.
@PricelessToolkit Жыл бұрын
yes, that's a good option too.
@johnlocke_1 11 ай бұрын
Do you have a "how-to" tutorial?
@hachogonzalez8649 Жыл бұрын
yes please can you share the Severing reflow oven project ? It looks really cool
@PricelessToolkit Жыл бұрын
Hi, github.com/PricelessToolkit/ReflowOven_Backup
@simonsayshomeassistant Жыл бұрын
Just subscribed!
@PricelessToolkit Жыл бұрын
Thanks!!!!!!!!!
@MrJonbot81 10 ай бұрын
This might be a good way to add mini-split HVAC systems to home assistant. I wonder if there would be a was to ready the temperature setting.
@PricelessToolkit 10 ай бұрын
Haven't tried controlling your mini-split HVAC using ESPHome with an IR diode?
@meierthomas Жыл бұрын
Could I use this with an AC control panel? This has conductive buttons for various functions. I think as long as I can connect to the button pins it should be ok, right?
@PricelessToolkit Жыл бұрын
Hi , if you can solder to button connectors, then yes, but it's better to check before buying, because the traces "conductive part" can be made of graphite. and you can't solder to it
@ashesofasker Жыл бұрын
Cool product! Would it work with Somfys RTS remotes for window blinds?
@PricelessToolkit Жыл бұрын
Thanks!, if you can solder wires to the button contacts then "yes".
@ashesofasker Жыл бұрын
@@PricelessToolkit I'm so gonna test this. Will let you know how it goes.
@djjmtimmermans Жыл бұрын
Hi, great project. maybe possible to make my waterboiler smart and connect to home assistant. Is it possible to simulate a long press? Because it automatically locks the keyboard and you need to do a long 3 second press to unlock.
@PricelessToolkit Жыл бұрын
Hi, yes it is possible like this - platform: template name: "waterboiler" turn_on_action: - switch.turn_on: Relay3 - delay: 3000ms - switch.turn_off: Relay3" esphome.io/components/switch/index.html#switch-turn-on-action
@adamdavila Жыл бұрын
What about a knob that turns for a window AC? How could I automate that?
@PricelessToolkit Жыл бұрын
With Espclicker you can't. but.. if the knob is electrical "Variable Resistor" there are many, so to speak "digital resistors" which can be controlled with ESP. If it's mechanical ten you can use servomotor and ESP.
@MM-321 11 ай бұрын
GREAT video. Your videos are amazing! But everything on your online store is out of stock. Why?
@PricelessToolkit 11 ай бұрын
Thanks!! I'm after the surgery, in a week everything will be available
@MM-321 11 ай бұрын
@@PricelessToolkit I hope you get better soon. Your projects are absolutely amazing.
@PricelessToolkit 11 ай бұрын
@@MM-321 Thanks!!!!
@PricelessToolkit 11 ай бұрын
Already in stock.
@MM-321 11 ай бұрын
@@PricelessToolkit Thanks! just bought two!. would you sell the MajicDeck (already assembled kit) on your site too? I'll defiantly get one if available for sale.
@darknessblades 10 ай бұрын
Wouldn't it be easier to program every ESP chip with a programmer before soldering it?
@PricelessToolkit 10 ай бұрын
Yes, but by doing it this way, I am testing the entire process from A to Z. There's always a chance that the via or trace is broken.
@brbk4498 Жыл бұрын
Nice video. Lol
@PricelessToolkit Жыл бұрын
😃 Thanks
@knowledge_seeker80 Жыл бұрын
@PricelessToolkit dear, do you have schematic of ESP PROG
@PricelessToolkit Жыл бұрын
Hi, ESP PROG ?
@PricelessToolkit Жыл бұрын
github.com/linshuqin329/ESP-Downloader
@knowledge_seeker80 Жыл бұрын
@@PricelessToolkit I mean orange board in circuit programing at 6:12
@PricelessToolkit Жыл бұрын
Wait a little, with the next video "Mailbox Guard" I will post a new version of the programmer 2 in one "ESP+UPDI Prog"
@knowledge_seeker80 Жыл бұрын
@@PricelessToolkit I am eager to see your esp prog schematic & want to know the difference between it & ESP+UPDI Prog
@TFA1982 Жыл бұрын
The coffee idea is nice, until you realize that the machine will clean itself first and this water will also go into your cup....
@PricelessToolkit Жыл бұрын
yes, it will clean the first time, I drink a lot of coffee that he doesn't have time to clean :) I sleep at 2 am and wake up at 6 am in the morning.
@Flavelius Жыл бұрын
From the title/name of the project, i was expecting to find a fingerbot alternative, but this just looks like esp+relay. That could be improved in my opinion.
@PricelessToolkit Жыл бұрын
Yes, you're right, it's just an esp and a relay in a small form factor.
@johnlocke_1 11 ай бұрын
Oh? Will you be improving it, then?
@Flavelius 11 ай бұрын
@@johnlocke_1 I think you responded to the wrong person, i'm not the author of the video, i cannot edit the title
@johnlocke_1 11 ай бұрын
@Flavelius no. I commented you. You said "this could be improved in my opinion" so, have you improved it or do you enjoy cutting down people's work while contributing nothing?
@Flavelius 11 ай бұрын
@@johnlocke_1 It sounds like you're suggesting that i'm trying to say the content of the video is bad. I just said that from the title i expected to find some different content and suggested that this misunderstanding could be improved; maybe my wording was confusing, but i'm not suggesting to change the content of the video, how could i (?), but to change the title.
@l337sackor Жыл бұрын
Dam, no shipping to Australia
@PricelessToolkit Жыл бұрын
Let me check it
@PricelessToolkit Жыл бұрын
Activated you can check "I don't know why it was disabled" but espclicker is on backorder now 15-20 days "then I will start sending orders in [order]"
@bernabap1 Жыл бұрын
@@PricelessToolkit Any chance to also enable Brazil as a shipping option?
@PricelessToolkit Жыл бұрын
@@bernabap1 yes, let me check
@PricelessToolkit Жыл бұрын
@@bernabap1 done
@A_Class216 Жыл бұрын
Can I just pay you to get the parts and put it together
@PricelessToolkit Жыл бұрын
Hi, you can order a PCB From china, and assemble it. all files are available on GitHub.
@TheUnofficialMaker 10 ай бұрын
Damn google and more ads. GREED!
@PricelessToolkit 10 ай бұрын
Yes, Google is manetizing my channel in place of me :)) I hope I can turn off ads soon.
@mrcableado1706 9 ай бұрын
Tesr
@PricelessToolkit 9 ай бұрын
?
PricelessToolkit
Рет қаралды 101 М.
mostlychris
Рет қаралды 65 М.
Digital Mirror
Рет қаралды 119 М.