Best synopsis of Crossroads ever! I love that movie.
@timothy46643 жыл бұрын
Lol. So hilarious
@fleet4fingers3 жыл бұрын
Did I watch the same movie he just described?! I feel confused! I’m having trouble watching this video now, LL.
@valentino31913 жыл бұрын
I personally enjoyed how Wille Brown (Joe Seneca) replied to the kid about "Clapton did it with Crossroads and The Rolling Stones did it with Love in Vain." Willie says it would just be another white boy ripping off our music. lol Harsh, but very true. All those fuckers made vast fortunes basically being plagiarists and the real guys that created Blues died poor and in obscurity. People get pissed when I say this, but its true. I love Clapton's music and the Stones, but I also take their tendency to "cover" obscure Blues into account when you look at the tremendous success they enjoyed.
@Viremia3 жыл бұрын
@@valentino3191 Perhaps people get pissed when you say it because of the use of the word plagiarist. Please educate me because I genuinely don't know the history, but how did Clapton and the Stones suppress the success of the creators of Blues? They played the music, helped make it popular as many artists had and have done throughout music's history. The lack of success by the creators was not down to Clapton or any other artist but to societal and industry racism. It is incredibly unfair but I doubt it was down to the artists who helped bring Blues to the masses preventing those creators getting their due. I will agree that Clapton et al. should have credited the creators better (or just at all) and that does enter into plagiarism, but the tone of your post comes across as putting too much emphasis on Clapton, the Stones, Zepplin, etc. for the lack of success of those who created the genre.
@goodun29743 жыл бұрын
@@valentino3191 , as far as I'm aware, Clapton and the Stones were generally pretty good about giving credit where credit was due to the original writers/performers of the music that those bands covered and popularized. Whether any of those blues originators got royalties from Clapton and the Stones et al, is another story. To their credit, the Stones gave exposure to those blues artists still living and insisted on having folks like Howlin Wolf play on British TV. Led Zeppelin, on the other hand, not so much.... If it wasn't for people like Ry Cooder, Bonnie Raitt, Rory Block, John Hammond, Leon Redbone, and Taj Mahal, I probably never would have heard of Fred McDowell, Blind Blake, Mississippi John Hurt, Tampa Red, Blind Willie Johnson, Rev Gary Davis, Joseph Spence, Charley Patton and so on. Cooder used to hand-deliver royalty money to Sleepy John Estes! Sadly, there weren't many white musicians who followed through on that sort of economic justice. Still, the folk/blues revival of the 1960s spurred an interest in their recordings and enabled some of those surviving classic blues men and women to tour Europe, and sometimes even Japan. Sadly, I'm just a bit too young to have experienced much of that, though I did get to see Elizabeth Cotten, Sonny Terry and Brownie McGhee, and a few others.
@billbones10003 жыл бұрын
I've got a tuba that needs to be a trumpet, table saw here I come!
@PabloDamon3 жыл бұрын
funny
@TonyClarkGuitar3 жыл бұрын
Pretty much sums it up.
@dank88653 жыл бұрын
Oompah oompah - BLAT!
@nicolen.96423 жыл бұрын
Lol...😆
@channelsixtysix0663 жыл бұрын
A piccolo trumpet ....😆
@dudemaestromaster3 жыл бұрын
I have to say, I'm disappointed we didn't get to hear him test out the drum! Haha
@that_thing_I_do3 жыл бұрын
Bet he does a mean Ina Gadda da Vida...
@arlingtonhynes3 жыл бұрын
+1 for “protuberance”, +1 for “showing an old black man the meaning of the blues. These are the rhetorical moves I subscribed for. Thank you. 9:20 Hear that sustain?
@fdfsdfsvsfgsg48883 жыл бұрын
Why? Blind Dog showed Lightning Boy the meaning of the blues. That's literally the point of the film. Not sure why Ted was sarcastic about that and certainly not sure why you weigh in with your virtue signalling BS.
@bobleonard93583 жыл бұрын
@@fdfsdfsvsfgsg4888 watch the film again; maybe this time with a friend who gets the humor
3 жыл бұрын
LOL...the intro is HILARIOUS! Always with a smidge of sarcasm. Good post!!
@D989501L3 жыл бұрын
Evening, if its any consolation, I once fitted 4 alternators on a car onthe same day ! as they didn't work. None worked and I thought it was me, took the 4th one back to the shop waiting for some derogatory remark and it turned out a whole batch was sent out wrongly wired. Great videos. Also it doesn't matter about how you say "out" 🤭 at least we know your Canadian. Regards to you and yours Richard 🇬🇧
@5000rgb3 жыл бұрын
" I once fitted 4 alternators on a car." At first, I didn't realize you meant one after the other. I was wondering how much electricity do you use?
@D989501L3 жыл бұрын
@@5000rgb sorry have amended, must be the Accent👍🤭. just to say im 60 and have owned several guitars, the last one was a Fender Acoustic, never got around to learning to play as damaged my right hand. But like watching you repair them. Its nice seeing someone who enjoys what he's doing and is good at it. Regards Richard 🇬🇧
@mrz803 жыл бұрын
The sound with the two pickups out of phase on the "Coodercaster" === GOLDEN! Sounds GREAT!
@santosl.harper44713 жыл бұрын
Next episode, we convert the bass into a banjosaurus
@forfilmmusic3 жыл бұрын
This guy's beyond amazing.
@perihelion77983 жыл бұрын
Once again I feel compelled to offer my thanks for the effort of producing these videos. They are a great help and inspiration to me and many others, and I know they take a lot of time.
@mattbridges89082 жыл бұрын
Hey, great video, when it comes to cutting down drums it's usually best to remove the extra material from the "resonant" side of the shell rather than the "batter" (striking) side. This is to preserve the original bearing edge on the playing side which is arguably the most crucial element in a drum's overall sound and playing feel. There are many variations on the angle and diameter and shape of the edge which all have drastic impacts on the tuning range, the length of sustain, tone, and attack. It's a fascinating subject and one that more drummers should become familiar with before buying their next kit. Basically the bearing edge is equivalent to the bridge saddles on a guitar, while the bottom/resonant edge would be like the nut... kinda
@moyleeppelstun6383 жыл бұрын
Well, that was a first for me I was thinking he's gonna have fun cutting the drum down, then the skills of this man just shone through! I learnt something new again today, thank you, sir.
@66fitton Жыл бұрын
That was scary! Watch how it's really done and you'll realize he had no business doing it. That was not skill at all. I've done this many times and he skipped some MAJOR steps to ensure a proper head to edge fit. He's amazing at guitar work no doubt, but that was a hack job on the drum!
@RedHeadGuitar3 жыл бұрын
That sustain is unreal, wow
@johnb55193 жыл бұрын
The culvert analogy was hilarious. That took some cool hands on the table saw, well done.
@jackelliott8723 жыл бұрын
As usual, I am amazed at the depth and breadth of the skill and talent. Thanks Ted.
@bartylobethal80893 жыл бұрын
I do a lot of soldering in an electronics environment as part of my job. We don't use 'helping hands' in our workshop. Instead we use small portable drill-press vices. I made my own from softwood just for giggles, but the others use steel vices. The weight helps a lot with stability of the part. Coarse thread on the screw makes them quick to adjust and they can hold anything from a fine tinned copper wire to a large PCB assembly (on edge). The jaws can be replaced with wooden ones or covered in leather to help avoid marking parts. Shrinking heatshrink with a lighter works, but hot air is a better solution. We just use regular heat guns like those you'd use for stripping paint etc (because sometimes we need to shrink large-diameter heavy wall adhesive heatshrink), but a small 'pencil' type would be a good choice for sleeving wiring joins.
@perihelion77983 жыл бұрын
These are good suggestions, so thanks a lot. Personally, I use a soldering iron to shrink the wrap, as it's handy after the soldering process. I modified my 'helping hands' with over-sized clips, but the mini- vice/drill stand idea sounds very interesting. I'll try it.
@Scodiddly3 жыл бұрын
Panavise is my vice of choice.
@helloman2213 жыл бұрын
I also do a lot of soldering at work (audio cabling), and we're similar in our practices. We use a panavise for holding connectors or anything fiddly or round, and a standard heatgun for our heatshrink set to 250C. The panavise has plastic jaws so connectors don't get marred, and I pack it with foam if I'm holding something with a delicate finish, such as an anodised connector panel. I've personally always found helping hands to either take too long to set up, or to be too fiddly and bothersome to work around. One suggestion I would make that I think would make things a lot easier is to switch to a chisel or bevel tip on the soldering iron. The added surface area really helps in heat transfer, and allows you to drop your dwell time pretty considerably. Conical tips are best placed for fine pitch work on a circuitboard, though even then I'd personally switch to a small chisel or bevel unless it's SMD work.
@lwilton3 жыл бұрын
@@helloman221 I use a drill press vise a lot for holding things to solder. Also, for about 50 years I've had a really cheap 3" C clamp made from 1/4" by 1/2" wide bar stock that came from some grocery store tool bin. I glued a 1/4" layer of cork to the screw tip, and it is really great for holding XLR jack ends when I'm soldering them. It lays flat on its side on the bench, and I can just push the XLR end into the clamp and pull it back out without squeezing or adjusting anything. I don't do that much these days, but there were times that I had to do 50 or 100 of them in a day. I personally like a 1/16" or 1/18" bevel tip for light loose wire soldering. I've used 6V transformer operated irons for decades. They are much lighter than the the modern temp controlled irons (which I use for PCB work), and generally I find them much easier to use, especially when you need to stand on your head in a box to wire something. I also have an old 100W Sears soldering gun. Greatest thing around for things like soldering to a chassis or the back of a pot. You can get the whole area up to temp and soldered in about 5 seconds, and don't have to spend minutes melting the whole pot and all of it's insides with a puny 35W iron.
@helloman2213 жыл бұрын
@@lwilton Whatever works is what works best! We only use the Panavise because it's a justified expense at work. I usually stuff four XLR connectors or five jacks in there when I'm working on cables, and it really helps in making short work of multi-core cables. I feel your pain at 50-100 XLRs in a day! At home, I've got an off-brand desk clamp vise that I pop on the bench when I'm wiring, it's just a rubber-jawed small vise really and it works brilliantly. I've also got a circuitboard vise - it spins along it's axis so you can pretty quickly stuff a board and flip it over for soldering without throwing your components everywhere. It's exclusively Weller irons at work without temperature control, and all have a 3.2mm chisel tip unless someone's working on a bantam patch bay, when it's worth swapping out to a smaller tip. They're pretty good for when you're at the bench, but definitely rubbish when you're up a ladder or in a box! You have to bring a second ladder along to put the station on, which is pretty frustrating in a room full of contractors. I've got a Chinese ATMEGA based station at home which doesn't seem to struggle with anything I throw at it. The tips, which are Hakko, have the heating element built in, so the thermal transfer is great even on the thinner tips. Haven't managed to cook a pot with it yet, however I haven't tried removing any major heatsinks yet!
@tagosto3213 жыл бұрын
Your videos are incredibly therapeutic. Your disposition is comforting. Thank you!
@matthewf19793 жыл бұрын
I’ve never received a bad CTS pot. One in a million I’m sure. Holy cow that bass drum is *HUGE* !
@freto_cognito90013 жыл бұрын
oh god. I installed a CTS pot into an LP of mine that only turns like 3/4 the way. It's really annoying cause I'm just too lazy to fix it. lol
@goodun29743 жыл бұрын
Where are the modern, reproduction CTS pots manufactured? Probably in China or Asia like everything else. These days, a brand name is just a marketing tool and it doesn't automatically infer a "quality" product. Also, counterfeit parts abound! I've seen counterfeit IC's, CD lasers, MOSFETS and transistors, so why not counterfeit potentiometers?
@josephpbrown3 жыл бұрын
@@goodun2974 Taiwan. Apparently CTS also has different "tiers" of pots too, maybe some are American-made or something? I actually have a Taiwan-made Sterling bass and it's not half bad, but that can't be said for everything I guess.
@dalgguitars3 жыл бұрын
"Lucrative and Glamours world of drum repair." Fantastic!
@mikaso3 жыл бұрын
Thanks for showing some of your very neat soldering practices. Much appreciated!
@plainolded50303 жыл бұрын
My ear likes the sound of the first filtertron anyway and the Lollar kicks hiney all over the place, (thanks Ry). I like your work and watching you do it ...... thank you.
@marcuscarrozza7323 жыл бұрын
Love the drum fix. WhAt I like about mostly is it involves a musical instrument fix but not the same guitar stuff. That's why i am great full i found your channel. It has a variety of work being done. 👍
@Intrinsic.Recording3 жыл бұрын
I commented, and it vanished. If ya see a double post, sorry. Just wanna say thanks for the video, it was good entertainment while I was soldering. Nice playing too Ted. I like the slightly overdriven tone with that guitar. Appreciate you taking the time to make this.
@kevinsnyder44253 жыл бұрын
It's early in the morning, and then I hear the word "protuberences" ,and my head started spinning ! Never heard that one before ! Nice conversion ! Love your channel !
@douglas7143 жыл бұрын
Endlessly entertaining and enlightening. Cheers to you!
@michaelinglis567 Жыл бұрын
That crossroads bit seriously was perfection lol. And as for the 4 way wiring I really appreciated that you took the time to find a more intuitive order for your customer. I wire my teles with a 4 way switch and most people that use 4 ways do it B, B-N parallel, N, B-N Series which I find really unintuitive. So I always wore them B, B-N Parallel, B-N Series, N. That way all the way down is still the bridge and all the way up is still the neck which is useful for quick changes between the most commonly used positions. But to each his own.
@Catonius3 жыл бұрын
I love your synopsis of Crossroads. lmao good man, cheers Mister!
@TommySG13 жыл бұрын
I always look forward to your feeds, they're excellent really. I'm sure I'm not the only one that thinks so either but much appreciated. 🤙
@Strumbum013 жыл бұрын
You’re a master at your craft sir. Great video!
@DavideGuerri3 жыл бұрын
the cut out of that kickdrum should be repurposed as a gong drum, basically a huge single head floor tom
@arctichare81853 жыл бұрын
Or a bodhran!
@gramursowanfaborden58203 жыл бұрын
or a YAYBAHAR!
@altruisticphilanthropic46473 жыл бұрын
Even in non-strung instrument repair, Ted's wit comes shining through; "it's like having a length of culvert up there"...brilliant...I've often felt similarly over many decades...not focused directly on the kick drum size, but more on the kicker himself. // Your posts are always great...thanks for taking the time.
@michaelhayman25493 жыл бұрын
We didn't get much of a listen to the original pickup but what I heard sounded great. Don't mess with things that work. Really enjoy your videos mate.🎸
@Ricobass03 жыл бұрын
Top tip from someone who has been soldering since the 1960s: change your soldering iron bit for one with a flat end. Chisel or truncated cone; both are good. They will transfer heat quicker onto flat surfaces like switch terminals and the back of pots. It will allow you to complete the joints quicker and paradoxically, using less total heat transfer, because you are on the joint for less time. A pointy tip is only good for tiny components on small printed circuit boards.
@dborne3 жыл бұрын
Also get a flux pen and make a little dab on the joint - the solder will rush onto the back of the pot in no time.
@Ricobass03 жыл бұрын
if the parts are clean and you use cored solder there's hardly ever any need for extra flux.
@Ibaneddie762 жыл бұрын
I'm not gonna lie I really want a Coodercaster now! Great job on that drum!
@ironsave32013 жыл бұрын
Love the videos. Thanks for what you do.
@arctichare81853 жыл бұрын
I particularly like the transformation with that drum! Would love to have that cut-off part to make a bodhran.
@66fitton Жыл бұрын
I took a couple of pieces left from cutting some toms down and had them made into clocks. Gave one to the customer and kept one for myself. He loved it.
@108ashtangi3 жыл бұрын
Always good. Thanks for sharing your working process.
@billhillard3 ай бұрын
I LOVE the multi-contact jacks. I started using them a few years ago and I will never use anything else again. Thanks for the great video.
@bobleonard93583 жыл бұрын
I'm less than a minute in and I have to pause and say thank you. Thank you for just being you and sharing.
@hydorah3 жыл бұрын
That's a shame. The new pickup sounded ace. But yeah customer will just have to buy another one! Wow that drum looks amazing! You should have given us a demo! Great vid as always!
@markcarson85662 жыл бұрын
Wow I just love your comments about what you do and totally 💯 enjoy the stuff that you’re able to do not to mention what you run into, totally cool!
@lumpyguitar51693 жыл бұрын
🖐🏽😎🎸👍🏽 Absolutely the Best work I've ever seen and with complete understandable explanations. Must different than poor O.C.D. Jerry Rosa. THANK YOU 👏🏽🇺🇸✝️
@olivercorrodi33403 жыл бұрын
for anyone cringing at that shortened kick drum, don't worry, it probably sounds even better after shortening it - talking from experience here (: short kicks especially with large diameters from 22 to 26" are much easier to tune and easier to get them to sound right - much less low end messiness, shorter sustain (good for recording) - check out john bonham's drum setup, 26 by 14 inches
@mordokch3 жыл бұрын
I was more worried that taking the cut from the playing end of the drum would move the tom holders too close to that end, which it looked like it did to me. I ain't no expert - I play a roland kit ffs lol (KD14 though !), but when I've played acoustic kits, the tom holders are usually either in the center of the top of the shell, or even further forward, but not way back towards the player. Maybe I'm missing something ? Not complaining, just an observation.
@bradc322 жыл бұрын
@@mordokch its a air hole not a hardware holder...pretty sure diddn't get a great look
@theRandy7123 жыл бұрын
I love how you always tell us that a tuning is unfamiliar to you ( or even when you did the lefty! ) as you play a perfect awesome little jam for us
@wrenchhead43783 жыл бұрын
Those pure tone multi-contact jacks are awesome!! I have them in ALL my guitars... they make em in gold plate too....
@cliffordrollins68883 жыл бұрын
great job! can't wait to see the next project.
@gtheduke3 жыл бұрын
As a drummer who does some guitar tech-ing, I can appreciate you crossing over! There's no tom mounting hardware on there though, that's a virgin drum. The hole you pointed to was the air vent grommet. If you do something like this again, I'd recommend cutting the bearing edge on a router table, it'll keep the drum square and you won't have to worry about the router wobbling. Well done though!
@duncanbrown18642 жыл бұрын
Great sounding bat, amigo! You done major good :)
@glenncollins47786 ай бұрын
You are more daring than I thought!
@dennisroach54422 жыл бұрын
I think you're a heck of a good guitar repairer. And you play pretty good too. Keep doing what you're doing. I love your videos. I'd love to send you a picture of the lapsteel guitar, I built. Dennis, from Frederick Maryland
@gregoryguitars62913 жыл бұрын
Man. You are a true master.
@danielrobinson8373 жыл бұрын
Love your synopsis of the movie!!
@franklinslamo3 жыл бұрын
I have used those TV Jones pickups in several of my builds. The Supertron is basically a Classic Filtertron with blades instead of screws. It gives a slightly brighter tone than the FT Classic. It's a cool variation if that is what you are going for. P.S. I dig your videos and your approach. Thank you. -Frank @ Slamo Custom Guitars.
@markdalton2933 жыл бұрын
That filter-tron sounds awesome
@realisticdrumming3 жыл бұрын
I'm a drummer who's been watching this channel a while and the thrill i felt when that bass drum popped up on screen cannot be described in words. I feel compelled to inform you that the tiny hole on top of the drum is an air vent, and that you would have a hell of a time trying to use it to mount anything. superb modification though. long bass drums sound like trash, you no doubt improved it in more ways than one.
@66fitton Жыл бұрын
haha that's funny. Noticed that he got that wrong too lol. Since you're a drummer though, I feel compelled to point out that this was not a proper cut down job. Major steps missed! He didn't even level the entire edge after using a table saw to cut it. He just put a new edge on it. He's great on guitars, but if you're considering cutting down a drum, do not use this video! There are plenty of pros out there that will show proper methods. I've done very expensive drums with killer results. It is not as simple as smoothing off rough spots and carving a new angled edge!
@stonehartfloydfan3 жыл бұрын
Worked on a recondition of a very old Rogers kit, sparkle red.. had to try and match and repair where at some point the floor tom and snare had Tama hardware, worked out well but the reality is you can only do so much and such repairs will never truly vanish. Still in the end it was great to see the old kit back with all original parts and sounding great.
@66fitton Жыл бұрын
Um, we never heard it.
@stevenedwards44703 жыл бұрын
Nice Coodercaster. Pickup notwithstanding. Smoof. I like the little knurled selector switch.
@kbkman77423 жыл бұрын
I have had pots do that after being heated too long with the iron. Never a cts though. Alpha have been most reliable for me. The ones that can't cope with soldering heat are cheaper stuff like gotoh pots in mij fenders
@patriottothecore62153 жыл бұрын
Yay another great instalment to watch on Sunday morning here in the UK. I no longer read the Sunday papers.
@billdyke97453 жыл бұрын
Some days you're the windshield, some days you're the bug... That jack socket is impressive. Finally a simple solution to a problem that I've come across many times over the years.
@donaldholman90703 жыл бұрын
Another great video. Thank you for sharing.
@wyattsdad85613 жыл бұрын
Crossroads is one of my favorite movies! Ralph’s character wasn’t teaching a black man about the blues. He wanted help from him to learn the blues because he was a classical guitar player who was obsessed with the blues. It wasn’t a high budget movie but it was really good if you enjoy blues and Rock.
@goodun29743 жыл бұрын
Wyatt's dad, Ted was being ironic! Perhaps sarcastic....
@jipes3 жыл бұрын
First time that I see this Lollar evrsion of the Oahu lap Steel pickup (I'm a huge fan of Ry Cooder). Nice job on the quick drum I'm surprised that a drummer would buy one not knowing what size could give trouble but Hey that gives you a nice opportunity to show your mastercrafting
@russcorbett39233 жыл бұрын
Great video with a warning ,,,, the drum was truly unexpected !!!!! Great to see a bit if a vranch out !!!
@G60syncro3 жыл бұрын
I've cut down drums before and I never cut them all the way through... Always leave a 1/32" to keep the whole thing together so you don't throw the thing off kilter while cutting it. that last bit can be cut with a hand saw and that edge gets cleaned up when cutting the bearing edge chamfer. Also cool to see you do something relevant to us drummers who are fans of twoodfrd!!
@tommypetraglia46883 жыл бұрын
You think that was unique to Ted? Well, after finding his channel 2 years ago I was so intrigued by his mystique I made a point of going back to his beginnings and found this from 4 years ago Suitcase Drum Kit - kzfaq.info/get/bejne/kMeVY6WmmbjZXaM.html No shzz, for real. Damn fine job and lol 😆
@RedHeadGuitar3 жыл бұрын
Yup, after two days of searching for the error, i always measure the pots before installing them. I ran into the same problem one day. I know that feeling bro :D
@5000rgb3 жыл бұрын
I had one that only malfunctioned when I tightened it down in the guitar. That was a head scratcher. It was 4 push-pulls so a lot of opportunity for things to go wrong.
@spywithme3 жыл бұрын
Love your description of "The Guitar Kid".
@johnfkiii2 жыл бұрын
Again, impeccable work on the drum modification, but I couldn't help thinking about the drummer's choice: "Dude, just buy a shorter kick drum." It reminded me of someone coming in and saying, "This ES-175 is way too thick; can you shave a 2 inches off of the the body." To each his own, I guess. Great videos, though-- keep them coming please!
@Livelaughlimpbizkit Жыл бұрын
You're description of crossroads had me rolling 😂
@PC1603 жыл бұрын
I thought Ry Cooder preferred "top loader" Telecasters, not string through body. Hell of an effort! Thanks for this!
@claudecat2 жыл бұрын
Man does that bridge pickup sing! I want one. It's weird, because I've been a Cooder fan for a long time but until watching some videos recently was unaware of the "Coodercaster". Now I know a really small part of his secret!
@JeanMarceaux2 жыл бұрын
Damn that Tele is a sexy beast. The mahogany Thinline, stunning. Really reminds me of an old Classic Vibe Thinline that I own.
@ciachetti3 жыл бұрын
looking forward to seeing the final product!
@DonaldVanHall3 жыл бұрын
How is it not cheaper to buy a correct drum the size he wants? Still, you did a great job!
@drdrums13 жыл бұрын
If that was a production drum (not a custom shop job), then it probably would have been, but like guitar manufacturers, drum companies keep changing up the available finishes every few years. My guess is the owner wasn't able to get a shorter drum with the same finish.
@chimpsticks13 жыл бұрын
I have a Tele that came with a filtertron at the neck...I always struggled with it being too dark and overpowering the bridge pickup...I recently dropped a Hi-lotron in and its so nice for a Tele!
@chimpsticks13 жыл бұрын
kzfaq.info/get/bejne/md14YNGDuN7GaWg.html Here it is
@rtod43 жыл бұрын
The out of phase sounded pretty cool. I must say, like smashing a perfectly good guitar, there should be a law against drum circumcision 😄 A real drummer would have straddled it
@nickdryad3 жыл бұрын
I agree.I think its just interfering with nature. lol
@ericsills5290 Жыл бұрын
I love that guitar!
@mercse3 жыл бұрын
I've been finding the same problem with CTS pots lately. Dead on arrival or really wonky values coming out of them. I actually had a 500K pot that worked like a fader, loud in the center and would drop off to nothing when turned either direction. Took me totally by surprise. Seems that quality control is waning for CTS. Alpha pots, on the other hand, seem to be pretty much dead on. Finding 1 in 20 that are DOA. I like your videos. Great to see how someone else takes on the interesting jobs.
@Stlie13 жыл бұрын
Thanks for posting. I just built my first ever guitar. Built....well took a cheap Strat style guitar kit and attempted to make a coodercaster. Would've helped to have videos like this when I went through it all....
@robn713 жыл бұрын
I bet your heart was in your mouth at times when working on that drum 😗 nice job by the way
@TheDeedeeFiles3 жыл бұрын
Beautiful caster
@PaulMcCaffreyfmac3 жыл бұрын
Very nice précis of Crossroads. I laughed and laughed I gotta tell ya
@waltergwiazda1803 Жыл бұрын
Great tone!🎵
@zaclassiterdrums3 жыл бұрын
I’d love to see more drum repair!!
@66fitton Жыл бұрын
Watch someone who knows how to do it then. This guy is great with guitars but he does NOT know what he is doing with drums. That was scary. And not done properly at all. Check out some real drum guys and you will see what I mean. Won't take more than two videos to understand.
@melancholicmelon73383 жыл бұрын
Very interesting guitar, very very interesting.
@goodun29743 жыл бұрын
"Crossroads" is one of those movies that you either love or hate, as evinced by the comments below. I've been a Ry Cooder fan for over 40 years and there are definitely better movies for which he has done soundtracks. (BTW, Arlen Roth, no slouch on Tele or bottleneck slide, was Ralph Machio's guitar "coach" for that movie). "Paris Texas" (directed by Wim Wenders) isn't an easy watch but it's a personal favorite (RIP, Harry Dean Stanton). "Southern Comfort" is another that several people have mentioned below. Walter Hills Western "The Long Riders", and "The Border" with Jack Nicholson (featuring the lovely Cooder/Stanton collaboration "The Borderline") are also worth watching. Many of the other movies that Cooder worked on aren't great movies, starting with the Mick Jagger ego-trip "Performance" (BTW, it was Cooder playing slide guitar on the Stone's "Sister Morphine" for those few of you who may not know this), but the soundtracks are often interesting and typically feature long-time Cooder cohorts such as multi-instrumentalist David Lindley, singer/ singwriterJohn Hiatt and drummer Jim Keltner. If I could only keep one Ry Cooder record in my collection it would be a toss up between "Into the Purple Valley" or the live "Showtime" album, although "Paradise and Lunch" and "Get Rhythm" are also worthy contenders. There's tons of good live Ry Cooder concert material to be found on KZfaq.
@NKBobcat3 жыл бұрын
Great video. I enjoy your work. Learning from a master, via KZfaq U.
@68able23 жыл бұрын
let’s gooo that looks so cool
@whodunitpros85556 ай бұрын
Thanks great video filming and editing!
@jvin2483 жыл бұрын
I didn't see your final install of the Electrosocket, but your quick spin assembly of the new jack all the way to the stop jogged my memory of using them: Drop the jack to just below the lip at the bottom of the Electrosocket bowl then lock in place with the nut behind it. That way the guitar the player just stabs the amp cord in the general vicinity of the jack and the cup will guide the plug home. You probably got it set up that way but it's something viewers might benefit from.
@timothy46643 жыл бұрын
Lol that crossroads synopsis. Haha
@thebeatclinic90003 жыл бұрын
The bearing edge of a drum is usually two 45 degree cuts that meet in a peak. E.g. If the drum was 8 ply then maybe 2 ply's on the OD and 6 ply's on the ID like an assymetric roof.
@twoodfrd3 жыл бұрын
This one was bearing right on the very outer ply. Interesting.
@66fitton Жыл бұрын
"Usually"? You must be looking at the same kind of drums all the time lol. There's all kinds of ideas on what's best. And each has it's pros and cons. Mapex and Sonor are both very close to the outer edge from factory. Rogers are right in the middle of the plys, and any edge can be changed anyway. No rules regarding edges. Depends on what you are after.
@thebeatclinic9000 Жыл бұрын
@Steve Fitton Pedantic much? I said "usually" because that implies that most Japanese drums from the era he was working on have 45° edges. I own a set of Rogers Holiday drums from the late 60's and they are asymmetric 45° bearing edges as previously described. I also own a Yamaha Recording Custom from the late 70's/early 80's and they are a rounded 30° edge. Craviotto also do the fully rounded over baseball bat edge. Some other drums may do 60° edges. Did I leave any degrees out, pedant?
@eppynt3 жыл бұрын
Such a great description of cross roads
@BenState Жыл бұрын
That guitar sounds amaze balls
@DTGuitarTech Жыл бұрын
Wow! Drums too!!
@mightyV4442 жыл бұрын
"The length of a culvert"! 😀 I've been following a guy's channel for a while who loves to unclog culverts (often by removing beaver dams), and in his latest video he'd been to the Niagara Falls and in one shot points the camera at the skyline in the distance and says, "That's Ontario/Canada over there" 😁
@budgetguitaristcom3 жыл бұрын
That is a cool guitar!
@SkyscraperGuitars3 жыл бұрын
I enjoyed the change up!
@goodun29743 жыл бұрын
At 9:20, It might be helpful to make up a shielded guitar chord that plugs into your test amplifier on one end but has alligator clips on the other so that you can test used pickups (or even new ones) before you go through the trouble of installing them into the guitar and wiring them into the controls. BTW, a tuning fork held next to the pickup makes for a pleasanter and more accurate test than just tapping on the pickup. An aluminum tuning fork probably wouldn't work but I used to have one that I think was made of chrome plated brass (?) and that transmitted through the pickup just fine. I haven't seen that thing in years, I wonder where it went to..... probably buried in a pile of my missing brain cells somewhere!
@JC-111113 жыл бұрын
I started to buy those exact helping hands. I ended up with a square steel base so I could add magnetic accessories & arms later and locks to lock the clips in place that yours doesn't have. Not a week later, I replaced those plastic arms with steel, magnetic arms. It all came from Kotto/F Stop Labs. There's a more expensive version from QuadHands but going by the arm of theirs that I bought & returned, they're lower quality than the Kotto that's half the price of the QuadHands.