Cool idea! Do not throw away broken drill machine!

  Рет қаралды 5,803,703

King of Homemade

King of Homemade

4 жыл бұрын

I installed a 12 volt blender motor on the broken drill machine.
It's not as strong and fast as it used to be, but it can be used in small jobs.
You could also use 12v battery instead of adapter.
MY INSTAGRAM: / king_of_homemade
Please leave like and subscribe.
Watch my other videos:
Angle Grinder Hack! Don't Throw Away the old Angle Grinder!
• Angle Grinder Hack! Do...
How to Make a Circular Saw Using old Angle Grinder!?
• How to Make a Circular...

Пікірлер: 875
@kingofhomemade
@kingofhomemade 4 жыл бұрын
Thanks for watching, leave a comment.
@rijwankhan3417
@rijwankhan3417 4 жыл бұрын
Uufvicgj bjh get the latest flash
@BruceLee-jf7wk
@BruceLee-jf7wk 4 жыл бұрын
What is the name of motor I want it can available on online tell me
@andrewworsley7912
@andrewworsley7912 3 жыл бұрын
Get a new brushless drill. Cheap enough and will do a better job than that old P O S
@kumarvelvel7267
@kumarvelvel7267 3 жыл бұрын
🙂🤩😚😇🤩😙
@mriduldaspt1215
@mriduldaspt1215 3 жыл бұрын
@@rijwankhan3417 à
@deightonharper877
@deightonharper877 3 жыл бұрын
Perfect for drilling butter.
@johnwhodat8135
@johnwhodat8135 3 жыл бұрын
Hahahaha
@vonzen
@vonzen 3 жыл бұрын
Best YT comment of the day.
@stevehaire6324
@stevehaire6324 3 жыл бұрын
Genius.!
@larrybargon5018
@larrybargon5018 3 жыл бұрын
Man. If you only knew how bad I needed this laugh when I read this. Thank you from the bottom of my heart.
@nickybritain4900
@nickybritain4900 3 жыл бұрын
The bearings sound rough, the whole event is not worth it. Drills of that quality are cheap enough, better to recycle and buy a new one!
@paulmerron3947
@paulmerron3947 3 жыл бұрын
Think it may have been easier and better just to put new brushes in it!
@HepauDK
@HepauDK 3 жыл бұрын
Yes. My guess is that a good clean with contact cleaner and new brushes would have the motor run pretty much like new. The worn out bearings and absence of grease is a completely different story...
@maseratifittipaldi
@maseratifittipaldi 2 жыл бұрын
In this case the armature and/or field coil was probably burnt and useless. This is a good Mc Gyver if you are far a way from a store / stores are closed / urgent job and if you have a DC motor handy which can fit into the housing nicely.
@billcobbett9259
@billcobbett9259 2 жыл бұрын
That's what I would have done, and a new power cord.
@InklingBoy
@InklingBoy 2 жыл бұрын
you might not know if the rotor was ok or not, what if it is burned
@camelpissdrinkernabimuhamm6611
@camelpissdrinkernabimuhamm6611 2 жыл бұрын
But with this 775 motor drill machine, you can use it with just a 12v battery anywhere.
@johnnyjohnson1474
@johnnyjohnson1474 3 жыл бұрын
I've got to be more careful when I pick a video to watch
@lennartekdahl8298
@lennartekdahl8298 3 жыл бұрын
Ohhh yess.....absolutly......AC and DC
@lennartekdahl8298
@lennartekdahl8298 3 жыл бұрын
Hmmm.... you mix AC and DC motors......thats no good.....put it in the recycle bin
@lanovasquez9939
@lanovasquez9939 3 жыл бұрын
😂
@diymaster101
@diymaster101 Жыл бұрын
@@lennartekdahl8298 he’s not mixing it he is using 220v or 110v to 12v circuit so he’s not mixing the motor maybe you should know what happening before you comment
@algator55
@algator55 3 жыл бұрын
I just learned how to spend a few hours turning up 120 volt drill into 120 volt drill😳
@mitulw
@mitulw 3 жыл бұрын
😆😆😆
@streetsmart1164
@streetsmart1164 3 жыл бұрын
You also learned, "how to" waste a few hours.
@frikkiesmit2695
@frikkiesmit2695 3 жыл бұрын
Serious? 🤔
@spudboyQ
@spudboyQ 3 жыл бұрын
Not only that, I believe you also watched someone turn something back into itself.
@mickyb4503
@mickyb4503 3 жыл бұрын
🤣🤣🤣🤣
@majorsteventoddretired5619
@majorsteventoddretired5619 3 жыл бұрын
This guy is like a driving instructor who says "Keep Death off the roads, drive on the Sidewalk.. Nutter
@jb813
@jb813 3 жыл бұрын
Next video: "How I adapted one of San Onofre's discarded nuclear reactors to drive my wife's washing machine"
@hotrodswoodshed7405
@hotrodswoodshed7405 3 жыл бұрын
LOL
@vonheimlerstrudel
@vonheimlerstrudel 2 жыл бұрын
😂
@ernanramires6078
@ernanramires6078 3 жыл бұрын
Perfecto algo así estaba buscando !!! Saludos desde MÉXICO 😁
@420jacksonian
@420jacksonian 2 жыл бұрын
great, i finally have a use for that drawer full of old blender motors i'm not using
@multibusa
@multibusa 3 жыл бұрын
Well done for making the most under powered drill on the market. Top job. For your next video let’s see your refurbished tool, drill a 13mm hole.
@alexmurdoch3828
@alexmurdoch3828 3 жыл бұрын
Haha it can barely drill pine with a 5mm
@travelbugse2829
@travelbugse2829 3 жыл бұрын
The deal breaker is connecting the small diameter motor shaft to the old gearbox by drilling the old output shaft. That's really skillful engineering! Not many people are up tot that! Interesting to watch anyway (with the sound turned down).
@JohnSmith-mw2hh
@JohnSmith-mw2hh 2 жыл бұрын
Darn...need a drill to fix a drill.
@rogercraven2667
@rogercraven2667 2 жыл бұрын
That's interesting...I cast this one to my ho. W theater system and rattles the windows!
@glennryan646
@glennryan646 2 жыл бұрын
@@JohnSmith-mw2hh Oh the irony.
@soylentgreen9492
@soylentgreen9492 Жыл бұрын
I used my Catitar to play the strings. She was not amused😾
@travelbugse2829
@travelbugse2829 Жыл бұрын
@@soylentgreen9492 Did she divorce you?
@belaliaahmed2416
@belaliaahmed2416 4 жыл бұрын
very good for making holes in butter
@cardwellthomas3065
@cardwellthomas3065 4 жыл бұрын
Can you use the gears to replace powerwheel gears as well.
@wht240sxka
@wht240sxka 3 жыл бұрын
Cool you made a drill out of a drill!
@mjhornidge
@mjhornidge 2 жыл бұрын
Took a drill apart. Then put drill back together. Amazing!!
@b6schilke996
@b6schilke996 4 жыл бұрын
Maybe if I lived in Cuba, otherwise spend $12 dollars at Harbor freight and get a new drill
@kennydavis2276
@kennydavis2276 3 жыл бұрын
HF drill.... really ?! Lol.
@Thedeaconoftrade
@Thedeaconoftrade 3 жыл бұрын
lol thats exactly what I was thinking while watching this
@chief1972
@chief1972 3 жыл бұрын
Kenny Davis It's better than that abomination.
@indimahgoorcharan3259
@indimahgoorcharan3259 4 жыл бұрын
You can also run directly on rechargeable batteries. How much torque does it provide? You can also test it on bricks as well. If the old rotor is still good, you could have simply removed the stator and fit strong magnets on both sides of the rotor in the casing. It would save much work. Do cutting and no drilling to fit dc motor.
@kingofhomemade
@kingofhomemade 4 жыл бұрын
I should do that in one of my next projects. Thanks for watching 😊
@anonym7410
@anonym7410 Жыл бұрын
You cant Test it in bricks since it has No Hammerdrill function
@diypppalain
@diypppalain 2 жыл бұрын
so let me get this straight.... he took an old drill, removed the old motor, replaced it with a smaller weaker motor and got 4 Million views for that. Congratulations my friend. the title should be how to convert and old drill to 4 Million views! Something I was never able to do even with legit videos.
@mannyemilius1756
@mannyemilius1756 3 жыл бұрын
Bit ironic because you need a drill to do this lol
@mitulw
@mitulw 3 жыл бұрын
😂🤞
@rthompson968
@rthompson968 3 жыл бұрын
I'm going to keep telling myself this was a 15 year old kid making this video...so I don't feel like a real idiot for watching till the end
@shogunate2022
@shogunate2022 3 жыл бұрын
LOL
@gasmonkey5152
@gasmonkey5152 3 жыл бұрын
I'm here for the Megadeth the drill was a bonus.
@smallshoptalk589
@smallshoptalk589 2 жыл бұрын
HaHaHA, me too.
@BloodSport4All
@BloodSport4All 3 жыл бұрын
This perfectly demonstrates that just because you can do it, doesn't mean you should do it. I'd imagine after all the parts, the solder, the electrics and all the time and hassle of drilling bits out, cutting bits off, then all the worry that its going to electricute someone or blow up at some point, it may just have been easier to buy a new one.
@genesmith482
@genesmith482 2 жыл бұрын
You got that right!!!
@wsalinas1
@wsalinas1 4 ай бұрын
Tht s it..!
@sammyspaniel6054
@sammyspaniel6054 3 жыл бұрын
Why throw your old car away when you can put a lawn mower engine in it.
@guillramzramirez2547
@guillramzramirez2547 3 жыл бұрын
😅😂😅😂😅😂
@johnwick7189
@johnwick7189 3 жыл бұрын
😅🤣😅🤣😅🤣😅🤣😅🤣you killing ME Blessings brother 🙏
@edvaldofranciscodasilvafra3553
@edvaldofranciscodasilvafra3553 3 жыл бұрын
Muito bom gostei 👏👏
@davidwillard7334
@davidwillard7334 2 жыл бұрын
NICE ! MATCHSTICK !! HOLES !! THIS ! CONTRAPTION ! DOES !!
@missumenimsatanass
@missumenimsatanass Жыл бұрын
Great background music 🤘 Metal is the ONLY way to go! Lol
@mohammedfairozsharieff6189
@mohammedfairozsharieff6189 2 жыл бұрын
Great Useful Idea
@vd9hosigi613
@vd9hosigi613 2 жыл бұрын
magic motor! it is very good to see inside. you are really nice!
@anishaimagesolutions6097
@anishaimagesolutions6097 2 жыл бұрын
Great technique no doubt. We just need to realize that over engineered products can be simpler and cheaper if the required parts are replaced. Eg brushes. This drill is now imbalanced and can only be used for low torque jobs. Your engineering skills are 😊👍.
@user-wu1jc7zr4y
@user-wu1jc7zr4y Жыл бұрын
Yeah, i also noticed we can't use that for hard wood. But what if he welded the new motor to the old part?
@ramelsofranes21
@ramelsofranes21 4 жыл бұрын
Loved it
@CaraKreatif
@CaraKreatif 4 жыл бұрын
I like using the motor itself to make drill using dc source and throwing the broken drill 😀
@gabeyogi6371
@gabeyogi6371 4 жыл бұрын
no torque then.
@randallwilhelmi964
@randallwilhelmi964 3 жыл бұрын
It might feel like a waste of time to some, but skills some people have are always worth watching.learning something new is always worth watching.they probably said your wasting my time to Ben Franklin to.
@billcobbett9259
@billcobbett9259 2 жыл бұрын
Well fine, but I'd like to see people using tools and vice correctly.
@jimmyjamb4911
@jimmyjamb4911 3 жыл бұрын
so, you took a broken drill and made a dangerous broken drill.
@shogunate2022
@shogunate2022 3 жыл бұрын
LOL
@firebladex8586
@firebladex8586 3 жыл бұрын
Or at best a useless one
@sosscs
@sosscs 11 ай бұрын
Lol 😆 why is it dangerous
@Foppa905
@Foppa905 10 ай бұрын
supid people will call fixing something dangerous
@nikolasparadis7722
@nikolasparadis7722 9 ай бұрын
😂😂😂😂😂
@jeffrey3306
@jeffrey3306 3 жыл бұрын
Thanks for this video...good for us who cant afford to buy new one.
@larrywhalen596
@larrywhalen596 3 жыл бұрын
My feelings exactly, I'm fortunate to have several high end tools, meaning too expensive, but knowing how to repair anything is priceless. I haven't always been able to just walk into a store and throw money at the cash register in order to always buy the best tool in stock, but had always bought the best I could with what money I had In My Pocket, which fortunately have lasted for fifty plus years. And now that I do have several of those upper-end tools I still tend to use my older corded tools just for old times sake.
@Droningonuk
@Droningonuk 2 жыл бұрын
I thought this video was going to be crap it didn't disappoint 👍
@conductiveinkalternative918
@conductiveinkalternative918 2 жыл бұрын
Yes, much better alignment!
@beautywithbrodie8715
@beautywithbrodie8715 2 жыл бұрын
This. Is. Cool 😎. And the sound is perfect 👌 and the music 🎶 is perfect 👌😎
@matthewlincoln633
@matthewlincoln633 Жыл бұрын
Nice job man 🙏
@cjack121
@cjack121 3 жыл бұрын
Lot of complaints but over 2 MILLION views, mission accomplished!
@MrLaTEchno
@MrLaTEchno 2 жыл бұрын
Thank you for the Share. ...and so you can the next 10,000 holes drill . Good idea, ......... maybe on a drill stand for small narrow work with a clamp for workpieces. Greetings from Holland.
@beeshorts2743
@beeshorts2743 4 жыл бұрын
775 moter make dc powerful screw driver👍
@glennpolly3452
@glennpolly3452 3 жыл бұрын
those wire ties are sharp, especially the angle you cut them at - they will cut
@walidbenromdhane7252
@walidbenromdhane7252 3 жыл бұрын
Hi , great job ! Just Wondering to know when Ac to dc , bridge and rectifier?
@mariolaturnas6062
@mariolaturnas6062 4 жыл бұрын
Nice idea
@lorenzosamuel11
@lorenzosamuel11 2 жыл бұрын
But you still need to bolt the body of the motor to the casing or it with proper torque will spin inside the casing . Use the mounting holes on the front facing it the motor housing.
@halo79
@halo79 2 жыл бұрын
Hello. Good job, but the circuit you are running the motor with, where did you get it from or how did you make it
@Ww-yv1hh
@Ww-yv1hh 4 жыл бұрын
thought he was gonna repurpose it into a mill, but quickly realized he was just killin the clutch... i was like , wtf are you doi.... then remembered you cant fix stupid!
@thatonelonelyeagle5398
@thatonelonelyeagle5398 2 жыл бұрын
Don't throw away, repair it! Seems legit!
@its_marc
@its_marc 2 жыл бұрын
My mind is blown.
@carguy55
@carguy55 3 жыл бұрын
This is exactly like my drill
@rcclassiccrawlers4368
@rcclassiccrawlers4368 3 жыл бұрын
Maybe if I was bored out of my skull and wasn’t able to watch any paint dry......maybe
@guillramzramirez2547
@guillramzramirez2547 3 жыл бұрын
😅😂😅😂😅😂😅🎁
@ungratefulbastard8166
@ungratefulbastard8166 Жыл бұрын
That drill seen better dayz 😂!
@MrJiblack
@MrJiblack 3 жыл бұрын
That's like cannibalism ain't it, taking 1 drill apart with another
@mikym3479
@mikym3479 3 жыл бұрын
Informative video. now see how motor connects to chuck - actually offset from one another.
@seemikhan6986
@seemikhan6986 3 жыл бұрын
Eq!
@user-po5nm5pn5h
@user-po5nm5pn5h 2 жыл бұрын
kzfaq.infoHHZp8JeIAb0?feature=share
@sidneythomasparker121
@sidneythomasparker121 2 жыл бұрын
Good idea
@gizmogremlin1872
@gizmogremlin1872 2 жыл бұрын
Husband. Look honey I fixed it! Wife. This is why we can't have nice things.
@emilzatopec7000
@emilzatopec7000 3 жыл бұрын
Aunque el motor que usó de repuesto son los que usan los atornilladores a batería no puede tener la misma potencia debido al sistema de transmisión que poseen dichos atornilladores. Puedes perforar los agujeros que quieras en madera y usando una broca pequeña pero no puedes hacer siquiera un agujero en metal con esa misma broca con ese taladro refaccionado.
@ricardotarrayo9032
@ricardotarrayo9032 4 жыл бұрын
Nice sir galing
@idontsleepidream
@idontsleepidream 2 жыл бұрын
Great vid! Shoulda just gon'ahead and fixed that power cord while you were at it. Hehe.
@khairubasar5598
@khairubasar5598 3 жыл бұрын
Very good idea
@ratansinghsaini1136
@ratansinghsaini1136 3 жыл бұрын
nice sir ji so suppar ........//// so thxxxx
@eddiedaniels7598
@eddiedaniels7598 2 жыл бұрын
I'm rollin with you I'm the zombie apocalypse
@oliverelmes179
@oliverelmes179 2 жыл бұрын
no se me ocurrio ,buena gracias..
@breakingBox
@breakingBox 6 ай бұрын
Very good
@silran1
@silran1 4 жыл бұрын
Hello ,what is the circuit 220 ac to 12 v dc, good proyect
@sudhirpatil3434
@sudhirpatil3434 3 жыл бұрын
220 Volt AC to 12 volt dc, 1 can get adapter of laptop or any other device
@satanbane
@satanbane 3 жыл бұрын
That probably won't work, the drill probably needs more current than a laptop adaptor can produce. Actually, was this even a 12V motor? Looks more like AC->DC conversion without step-down, i.e., 265VDC or some such.
@MuhammadDaudkhanTV100
@MuhammadDaudkhanTV100 4 жыл бұрын
Great 🤘👌👍
@daklakdigital3691
@daklakdigital3691 3 жыл бұрын
You missed out on greasing the bearings!
@dkjawahar-techexpt671
@dkjawahar-techexpt671 6 ай бұрын
Really wonderful and useful information. Thanks for your efforts taken to share the video. From Jawaharlal Bharat INDIA 🙏
@hafiz9317
@hafiz9317 2 жыл бұрын
Excellent
@scottjohnson5449
@scottjohnson5449 3 жыл бұрын
NICE HEAD BANGING MUSIC!!!!!!!!!!!!!!!!!!!!!!!!!!!!! oh by the way nice job on the drill rehab!!!!!!!
@caelegape114
@caelegape114 3 жыл бұрын
Legal Parabéns,Deus bem diga! SALVE sua coroa! Axé.
@redskiclayton
@redskiclayton 3 жыл бұрын
5 minutes and 54 seconds of my life wasted!
@Ray-ks1xp
@Ray-ks1xp 3 жыл бұрын
I only made it 1.9 minutes before stopping 😌
@tsrjs
@tsrjs 3 жыл бұрын
@Gold Talon Ditto. My 1st clue was he called it a drill machine. So I jumped to the end to find out what the cool thing was and it wasn't. I definitely agree with your opinion of "amazing" things. I always kick myself if I forget to jump to the end and find it wasn't worth it. Fool me once, shame on you. Fool me twice, shame on me.
@arnielsexperiment9224
@arnielsexperiment9224 3 жыл бұрын
Why you all ways saying this
@outsiderfrancis5979
@outsiderfrancis5979 Жыл бұрын
Agreed.
@alanbevan3336
@alanbevan3336 Жыл бұрын
perfect for drilling jello.
@mikoro88
@mikoro88 2 жыл бұрын
You fixed it:)
@JohnFekoloid
@JohnFekoloid 4 жыл бұрын
Basically, you take out the big motor and put a smaller motor in. But was the big motor so impossible to repair?
@PhilJonesIII
@PhilJonesIII 3 жыл бұрын
Changing the brushes would have been my first move. Worn down to nearly nothing and not making full contact. If that fails, throw away. Not worth the time.
@AhadAli-qi7sq
@AhadAli-qi7sq 3 жыл бұрын
AmmA kar di dreel ki😀😁😂😃😄😅
@Mike-ff7ib
@Mike-ff7ib Жыл бұрын
Nice project idea if doing it just for fun but not really practical.
@littlehercules5716
@littlehercules5716 3 жыл бұрын
Good luck with it. Show us a video with you drilling through a 4x4
@cpeterson877
@cpeterson877 2 жыл бұрын
Redefines the phrase "I fixed it!"
@spatialguy5571
@spatialguy5571 Жыл бұрын
You are M . A . double . D man! I could write 10 pages about that video, none of it good! OMG! 🫣🤐🤐🤐🤐🤦🏻‍♂️
@barnabyhopegrant6607
@barnabyhopegrant6607 3 жыл бұрын
Great for drilling through plasticine
@umeshratwad5568
@umeshratwad5568 3 ай бұрын
Nice idea but how you connected reverse forward switch please explain
@taleSkele
@taleSkele 3 жыл бұрын
Chains after every heist
@fivemountains2224
@fivemountains2224 Жыл бұрын
Look very good. Well done !! Ques: What is (are) Specifications of the motor you used for this repair, Electrical & mechanical, model, size ?? THanks
@user-pv5yh4de6f
@user-pv5yh4de6f Жыл бұрын
드라이버 기술이 대단하십니다
@sergioluque9018
@sergioluque9018 2 жыл бұрын
yo pensé en algo parecido . pero tengo una duda con que estas alimentando el motor 775 ?
@paulmartin8100
@paulmartin8100 3 жыл бұрын
I was waiting for the cool idea. It never came. You replaced the motor in a drill.
@FixItPleaseJ
@FixItPleaseJ 3 жыл бұрын
With a crappier lower power motor.
@jersongonzales7691
@jersongonzales7691 3 жыл бұрын
Thank you my friend you give me an idea to use again my defective drill thumbs up👍👍👍
@trvmcintosh
@trvmcintosh 3 жыл бұрын
Please for the love of god put a guard on that cut off wheel. You can skimp away without it on other wheels tho, but the cut offs are disasters waiting to happen
@kurshidkhan7506
@kurshidkhan7506 4 жыл бұрын
Kya baat he bro
@billholland9366
@billholland9366 Жыл бұрын
Do you really think those zip ties are going to keep the new motor from spinning in the drill case when the drill bit has a lot of pressure on it, or it's stopped by a piece of metal you're selling through?
@danstrayer111
@danstrayer111 3 жыл бұрын
this is why we have pawn shops.
@curlysgarage6217
@curlysgarage6217 3 жыл бұрын
Why would you go through all that trouble when you can go buy a drill for 40 bucks at Harbor Freight in the United States but I guess you can fix drills
@NitroMeep3.3
@NitroMeep3.3 3 жыл бұрын
Actually you can get them cheaper than that lol.
@curlysgarage6217
@curlysgarage6217 3 жыл бұрын
@@NitroMeep3.3 I was just using that as an example but I'm sure you can buy drills for cheaper
@vonheimlerstrudel
@vonheimlerstrudel 2 жыл бұрын
He just saved $40 to stock up on Jack Daniels.
@snakedoctor1144
@snakedoctor1144 2 жыл бұрын
We don't all live in the United States... This is great advice for someone who comes from my part of the world. Whatever that drill cost you, multiply that number by 14 to get an idea of how much it costs here...
@e.j.hoopty8951
@e.j.hoopty8951 3 жыл бұрын
Best music to watch videos
@tdoruignat8839
@tdoruignat8839 4 жыл бұрын
Nice. How many watts consume now and if can do what do with Ac ?.
@huzaifakhan735
@huzaifakhan735 4 жыл бұрын
60 watts and first see what you are comment then ask
@jrqc6166
@jrqc6166 2 жыл бұрын
Hmmm, creo que mejor y más barato hubiese sido que reemplaces los carbones por unos nuevos, y así no disminuías la capacidad del torque.
@johnnyschneider849
@johnnyschneider849 4 жыл бұрын
How about steel 1/4 in or thicker
@stephenboyer19
@stephenboyer19 3 жыл бұрын
I bet this guy can make a blender from another blender
Skil 6610 Impact Drill Restoration
19:59
CDL TEK
Рет қаралды 547 М.
Angle Grinder Hack! Don't Throw Away the old Angle Grinder!
7:00
King of Homemade
Рет қаралды 4,3 МЛН
FOOTBALL WITH PLAY BUTTONS ▶️❤️ #roadto100million
00:20
Celine Dept
Рет қаралды 21 МЛН
We Got Expelled From Scholl After This...
00:10
Jojo Sim
Рет қаралды 27 МЛН
Cute Barbie Gadget 🥰 #gadgets
01:00
FLIP FLOP Hacks
Рет қаралды 45 МЛН
How to turn a damaged 220v drill into a 12v battery drill
10:01
Nice Creation
Рет қаралды 5 МЛН
AMAZING! Top 3 Bright Ideas with Bicycle Hub and Drill !
11:45
Fixotronic
Рет қаралды 12 МЛН
How to Replace Cordless Drill Motor - DC 550 MOTOR
6:19
Retsetman
Рет қаралды 163 М.
Excellent welding technique using spark plugs and 12V battery
12:01
Fix Cordless Drill  - Parkside PSBSA 20 Li B2
30:59
Dahen Zana
Рет қаралды 3,3 МЛН
5mm Shaft Connector Angle Grinder
8:42
khomoo
Рет қаралды 171 М.
Amazing. DIY mini Drill Press.
14:40
Serengy Tech
Рет қаралды 298 М.
Wow so cute 🥰🙀🤪🐣
0:14
Nguyên Ngốc Nghếch
Рет қаралды 23 МЛН
London Bridges Rap! #kidssong #funny
0:14
J House jr.
Рет қаралды 53 МЛН
Подкожные Импланты 🤯
0:23
MovieLuvsky
Рет қаралды 2,3 МЛН
Each found a feeling.#Short #Officer Rabbit #angel
0:17
兔子警官
Рет қаралды 7 МЛН