Explore a wide variety of content in our carefully curated KZfaq playlist: • Binge-Worthy Content Find more amazing tips at @TotallyHandyShorts #shorts
Пікірлер: 202
@MrNside2 жыл бұрын
Please don't tap wood with machine thread, it will strip out. There's a reason wood screws and lags exist, they will hold stronger and don't require all this BS.
@DO_NOT_HUMP2 жыл бұрын
He didn’t even use a spiral flute tap on that blind hole.
@MyAZDF2 жыл бұрын
I was just about to say the same thing, why even tap wood to begin with?
@videomaker33312 жыл бұрын
If hou do it in hardwood it is really strong and it won‘t strip out
@MrNside2 жыл бұрын
@@videomaker3331 If that were the case, cabinet screws would be machine thread. But they aren't, they're coarse thread, just like all wood screws. Stop lying to people.
@videomaker33312 жыл бұрын
@@MrNside i am not lying i have tryed it myself and go look for mathias wandel on youtube. He built a bandsaw and threaded a bolt into hardwood and it worked perfect
@jamesfair97512 жыл бұрын
Because we all tap threads into wood like that holds extremely well. Those inserts for bolting wood together is just waste of time and money. Ps if you couldn’t tell that’s sarcasm also try and tap metal with your homemade bolt/tap see how well it cuts threads into steel. Spoiler alert it don’t go well.
@SW-qr8qe2 жыл бұрын
Good for chase taps though. I use this to clean threads using old bolts when I don’t have a tap
@Professor-Scientist2 жыл бұрын
That's not what they are doing well and that the end of the way the whole thing is going to be secure or free of any initial dislike towards the end of the way the whole industry is running smoothly and efficiently and effectively and efficiently as possible to be secure or cold weather or cold water to be a perfect example of a sudden death of a good person
@user-yr2vq9ok4p2 жыл бұрын
Метчик из болта? Резьба в брусе? Теперь я видел все
@Artvinch2 жыл бұрын
мне кажется, что болт в деревяху закрутится надёжнее, если просто просверлить ∅11 под болт м12, ∅9 под м10. получится нагартованная резьба, а не вот это вот всё)
@Blue_Shoe_2 жыл бұрын
@@Artvinch самое шокирующее в этом видео это то, как актуально ты поставил значки диаметра😄
@amamamam11112 жыл бұрын
да у этого наркомана все видео такие
@user-yv6qx5sp2o2 жыл бұрын
@@Artvinch А мне кажется, что будет ещё надёжнее, если вместо болта использовать шуруп...
@Artvinch2 жыл бұрын
@@user-yv6qx5sp2o , шурупов с таким диаметром не встречал. а под винты всё равно придётся сверлить.
@santosl.harper44712 жыл бұрын
Dont tap timber, especially for bolt thread pitch. Use a through system for this application. Correct length with the required thread.
@tom.29002 жыл бұрын
If you already have a tap, why on earth do you need to make another tap of the same size? ...
@TyroneAli2 жыл бұрын
For people who don't have a tap schmuck
@tom.29002 жыл бұрын
@@TyroneAli but he used a tap to create it...
@TyroneAli2 жыл бұрын
@@tom.2900 he was showing wat a tap is he drilled a hole but the screw and cut it with the angle grinder he did use the tal but didn't use it to make the tap
@newtybot2 жыл бұрын
@@tom.2900 Tom, honey, baby, sweetie pie, The original tap he did at the beginning isn’t necessary for the whole piece, he’s just showing you what a tap does, and then showing you how to make one :) Tap and die sets can be pretty expensive, and if you’re just some hobby dude making bookshelves or stuff like that, dropping $200 on a set could look silly TLDR: the original tap at the beginning was just a demonstration, and not required for the build
@tom.29002 жыл бұрын
@@newtybot I bought a tap and die set for £15 at Aldi. It hasn't failed me yet. I've used it to tap a thread internally and externally on all sorts of things (...motorbikes and campervan applications mostly). This is definitely a stupid idea. You'd need all the other tools in order to make it, rather than just buy a cheap set.
@mynamedoesnotmatter7372 жыл бұрын
Nice idea making holder for bolt to cut it, and instead of cutting off the bolt head you could just round it off with the grinder. OR don’t do any of this, that’s your best bet.
@user-jd9ks7bh7b2 жыл бұрын
Мечик уже изобрели, и резьба в дереве это прям сверх идиотизм, слова великого классика, точнее доктора ,, самоделка полная ху.ня ,,
@user-be4cn7kd2g2 жыл бұрын
Да это гениально из стали марки пластилин сделать метчик Следующий видос наверное будет мультитул из какахи. P. S. Доктор дью тебе доктор
@VIP_RUS2 жыл бұрын
😂согласен, да ещё еб"ться что бы сделать
@user-yv6qx5sp2o2 жыл бұрын
Тем более, что для этих целей давно уже шурупы придумали...
@helecoptor41132 жыл бұрын
Wow you discovered the reason why these tools are used. Good job
@chahinakl80562 жыл бұрын
😂😂😂
@MaksSivkov982 жыл бұрын
А зачем в дереве резьбу нарезать??????????????
@user-zk9bv8er3o2 жыл бұрын
Как зачем?! Что-бы было, для них это оооочень важно.😂😂😂😂😂
@MaksSivkov982 жыл бұрын
@@user-zk9bv8er3o 🤣🤣🤣🤣🤣🤣🤣
@Ponytamin2 жыл бұрын
Гайки изобрели в конце 16 века Люди до конца 16 века:
@tummytub11612 жыл бұрын
I'm a professional woodworker for 10 years, been working with wood for 20+ at a high level. I don't know why everyone is hating so much on this? I sometimes do this, depends on what you're using it for. Never use this in constructive applications, but for in the shop, adjustable jigs, drawing out measurements, radial, you know, longer use temporary stuff. You can hang your tools this way for all I care, if you happen to have a load of bolts lying around. There's a thing called common sense, you know. Oh no, there's not, that's the reason why I still have a ton of work.
@tummytub11612 жыл бұрын
You can also use this method of making a pre- cutting tool for coarse threaded bolts, used for wood. At least the guy isn't shoving them in end grain, like I see "professionals" do a lot.
@shitsu-bai.daytoo2 жыл бұрын
А сам болт закрутить в доску сложно да? Саморезы как то закручивают, а вот метрическая резьба только после метчика😂🤣🤷♂️
@user-fb9xh7iz8u2 жыл бұрын
А может дюймовая резьба?
@Den-Korablyoff2 жыл бұрын
Каких же только самородков нет на ютубе...
@jamesmelanson79872 жыл бұрын
Yes, make your own tap, because taps are rare.
@SICresinwrks2 жыл бұрын
🤣
@waynesivell16112 жыл бұрын
Why would you want to tap wood???
@deanabel90342 жыл бұрын
Mebbe he just hang that way
@iivani42 жыл бұрын
Метчик для нарезки резьбы в дереве.... АЛИЛУЯ!!!! Теперь я видел ВСЁ!!!!
@nathan5842 жыл бұрын
Why the hell would you tap into wood that's just gonna strip and pull right out
@uzzie882 жыл бұрын
He used a bolt to create the thread for a bolt to screwed in. (If you don't have the first tool).
@GtsAntoni12 жыл бұрын
It's called a tap, and this video is terrible. You don't tap wood, the screw wouldn't tap metal, the woodwork was stupid and pointless, and a tap costs a few bucks. Save yourself the misinformation and click 'Dont recommend this channel'.
@rocketxvg16142 жыл бұрын
maybe for wood but there's no chance in hell this would work with something like solid steel unless you're using something high grade like a headbolt... you'd dull the "tap" out super quick otherwise e_e
@fbody231002 жыл бұрын
Works great for a thread chaser though. I do this with old spark plugs if new one isn't going in smooth enough.
@whitebear5192 жыл бұрын
Смотря на резьбу в дереве вспоминается конец старого анекдота. Мышь в п@зде - оригинально🤦🏻♂️
@aprendendoserheroi2 жыл бұрын
Thanks so much, God bless you...
@tachy6352 жыл бұрын
Really?? Tap wood?? And the most complicated way to make a tap ever?? Please!!
@user-vc1dj4ct6r2 жыл бұрын
Честно скажу что хочется лопнуть моё сердце!!!!! За что??? За безупречной ровной перфекционист!!!! Я сам перфекционист, хотел бы выходить из тела и летать от удовольствия!!!!! Всё из за перфекционист!!!!
@user-tr8qw2ly3b2 жыл бұрын
Какя же это чушь когда начинают изобретать велосипед, нужна ли вообще там резьба?! Без нарезания резьбы болт плотнее закрутиться туда соответственно крепёж получиться более надёжным
@klevkovskiii2 жыл бұрын
250 полуляхов из 250…
@Jonathan-ex3sl2 жыл бұрын
Cutting machine threads in wood with a fake tap is not a hack it’s a waste of time
@mpalaskokkalis14762 жыл бұрын
Τέλειο το αυτοσχέδιο κολαουζο είναι δύναμη.
@SW-qr8qe2 жыл бұрын
I make a chase tap like this for cleaning threads. Good on Diesel engine injector bolts.
@burleydad2 жыл бұрын
What in the “i don’t know sh1t about wood screws” is going on here?!
@stompingpeak20432 жыл бұрын
Why? Can't you just drill a smaller hole, squirt some glue in the hole, and screw the bolt into the wood? It won't be load bearing but it'll work to hang lighter things on.
@daltonbrink99242 жыл бұрын
Those threads are weaker than my self esteem.
@jonathanspeicher52982 жыл бұрын
Please take a class in strengths of materials; machine screws do not go into wood for a reason. 🙄
@santoferraz88052 жыл бұрын
Muito bom essa ideia
@MCircuits2 жыл бұрын
Oh cmon people, he is just showing what a true tap and an improvise one with that modified bolt will look like when done on wood. They are almost the same of of course used on non porous material like acrylics , HDPE, etc etc. I have no taps long before and used that bolt method and it works, but i find myself needing a real tap tool for metal and then junked the bolt method.
@user-rd4eu3cd2h2 жыл бұрын
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣 В дерево? Серьезно? А для пластилина тоже сделает метчик?
@chriscarpenter32642 жыл бұрын
I just want to to know how he drills perfectly straight all the way through the board
@dannythorpe1425 Жыл бұрын
Why would you thread wood? If using a bolt with wood drill all the way through and use appropriate washers and nut on the other end. There won't be much if any strength in this method.
@bufferzone32472 жыл бұрын
Why do all rappers talk like they just came from the dentist.
@SshAleksandr2 жыл бұрын
Метчик по дереву? 🗿
@mattcamarano2 жыл бұрын
Stop. Tapping. Wood.
@oldjackrustler93022 жыл бұрын
My Chinese friend did this building a jungle gym for his kid. The kid's in a wheelchair now.
@user-ss2dp9qt8w2 жыл бұрын
Нихера не понял.... в дереве нарезать резьбу?
@MacMalcyMac2 жыл бұрын
No tradie would ever do this. This is deffo for those have a go hero's 😂
@DwarfElf2 жыл бұрын
Будет интересно посмотреть на резьбу которую он нарежет этим "метчиком" хотябы в алюминии.
@Houndzee2 жыл бұрын
Thanks, I hate this.
@MammothRemovals2 жыл бұрын
Simply do this for looks guys not to hold anything together
@andyvillanueva26302 жыл бұрын
what do you need it for? if you already have one!
@Timo_35452 жыл бұрын
Just screw the bolt in it will tap itself without any taps
@badr862 жыл бұрын
Holzarbeiten, packt dann aber die flex aus 😂
@user-ll9qm7ey8t2 жыл бұрын
Самодельный мечик прослужит от зависимости плотности древесины долго или не очень когда надо это весчь.
@xmehkiskkd12 жыл бұрын
First why do you use Metal screws for wood? Like why? There are Wood screws, and they cost much less
@user-lr9tm1ck8g2 жыл бұрын
Резьба в дереве- это новый уровень, блет.
@firstnamelastname72752 жыл бұрын
Pretty sure taps are for metal to metal chief
@markadams11652 жыл бұрын
That seems like a lot of unnecessary work just to get a screw in
@Berealfool2 жыл бұрын
So you need a tap to make a tap? I’d probably just use wood screws.
@Timoffejj___RU2 жыл бұрын
Метрическая резьба в дереве? 😅 Накуя? Про шурупную резьбу погуглите - почему она именно такая, а не какая-то другая.
@clydebalcom36792 жыл бұрын
I can see the uses. And you can make an inexpensive tool that is functional. Been there, done that many times.
@lk80312 жыл бұрын
Is the hack still coming or did I missed it…again?
@newtybot2 жыл бұрын
Did you just tap wood Edit: you know this one’s not THAT stupid I think machine screws might screw you over in the long run but if you don’t wanna fork over all the money for a tap and die set I could see this being useful or the odd DIY project
@mikemireles28042 жыл бұрын
Awesome dude 👍👍👍👍👍👍
@treasuretotrash20672 жыл бұрын
how to make a tap: get a tap
@quickdiy81272 жыл бұрын
Cool ...mild steel zinc plated tap....I'm sure that'll last
@Rozhdenie_kolpachka2 жыл бұрын
Ну раз уж хочется нарезать резьбу в дереве.используй метчик из магаза.
@Nikolai-Velikih2 жыл бұрын
От Матвеева есть кто?? 250 ?
@andryshubin78642 жыл бұрын
Кургана?😁
@Nikolai-Velikih2 жыл бұрын
@@andryshubin7864 ты не в теме Свободен.
@AM-fx7ge2 жыл бұрын
Everyone wants to DIY like trades and skill don’t require training or expertise anymore
@irenefalcao23052 жыл бұрын
Show de bola👏🏻👏🏻👏🏻👏🏻
@kakaka55662 жыл бұрын
250 полуляхов
@kimmygarcia18152 жыл бұрын
I'm sorry but wouldn't metal tap wood anyway
@jonasandersson73672 жыл бұрын
So tell me Bout wood screw taps?
@swansong18512 жыл бұрын
So he made a tap from a bolt. It's better to use a shop bought tap. This was not a wonderful hack. If this was titled "How to make a tap hack" it would have saved a few minutes out of many viewers lives.
@matheww78472 жыл бұрын
Um...... you know tap and die kits are freaking cheap, right? Like.. $5 at harbor freight
@vladimirsitnov84392 жыл бұрын
Смысл от такого способа крепления? 250 полуляхов из 250. Кто смотрит дью поймёт
@user-be4cn5qx4s2 жыл бұрын
Ля глядите ребята я изобрел транспорт из 2х колес и назвал его велосипед.
@tuckdark91782 жыл бұрын
Bolt tip that's not what they are ment for use a screw or nut through
@climbing2002 жыл бұрын
This is so dumb... Not only are their good tools for this job, but also you are showing so many unsafe practices to make these shawdy tools. If the person watching this can get any single one of these tools, then they can get the right tool for the job
@SICresinwrks2 жыл бұрын
Every time i think this channel can't get worse, it does!
@irfndnil85512 жыл бұрын
This type can't use on metal
@Baby_Baby_962 жыл бұрын
Дью!!!! В студию
@charliehoes40712 жыл бұрын
Ok so how do I make a tap without already having the same size tap I want? And if I have the size tap I want, why would I want another?
@user-ub8gw5yv6t2 жыл бұрын
Метчик из китайского болта для дерева
@leogoes74022 жыл бұрын
KZfaq só pode tá de sacanagem me sugerindo esses vídeos pqp O cara pega um parafuso faz aquela merda para fazer rosca em madeira 😑
@user-ws5vq3ty6q2 жыл бұрын
А смысл делать метчик из сырого болта?????
@zijie-he2 жыл бұрын
Tapping lumbers? Interesting.
@buryione46612 жыл бұрын
К чему автор показал эту дичь?
@user-StimAks2 жыл бұрын
Скажи мне, что ты купишь?!)))))
@pointlessink60842 жыл бұрын
Well that just dumb, why do you need all those tools to make a drill that won't even last after a few use
@joeborrajo1862 жыл бұрын
You could buy one for about 7 bucks
@DM0142 жыл бұрын
А нахрена мне вкручивать болт в дерево?
@user-ow3jb6qy2z2 жыл бұрын
Если есть резьба, не гвоздь же вбивать.😀
@user-vo4ku5po2w2 жыл бұрын
А для чего эти качели , болты не заворачивают в дерево , глупота !!!
@DN-vt3wr2 жыл бұрын
😮👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@bottledwater62142 жыл бұрын
You’re the only hack I see here
@1zanglang2 жыл бұрын
Nowadays, taps are available everywhere...
@SaniaKEX2 жыл бұрын
Как вилами по воде.
@user-yz7ed6hf7w2 жыл бұрын
А на кой хрен делать резьбу в деревянном бруске?
@shaikhkhairunnisa31692 жыл бұрын
Karnaka chataho
@user-yv6qx5sp2o2 жыл бұрын
Шурупы? Не, не слышал...
@vitolbrutol2 жыл бұрын
Он так же с шурупами делает
@user-db7fi6cb4s2 жыл бұрын
굿 아이디어
@PsychoticEwok2 жыл бұрын
That's not going to be able to support the weight of a fart