Copart WIN or FAIL?? Flood Damaged Jaguar XK V8!

No video

Copart WIN or FAIL?? Flood Damaged Jaguar XK V8!

Рет қаралды 19,500

Жыл бұрын

Something different in the workshop today, a new customer got in contact saying he has bought a flood damaged car from copart and would be interested in investigating and rebuilding? Of course we are!
Get in contact if you want to have some work done:
/ autoshackipswich
Have Fun, Super Ron!

Пікірлер: 48

@reality-cheque Жыл бұрын

Thanks for the video. I had the same issue with my 2013 XK DHC. Stalled in 6" of water - hydro locked. My insurance paid for a replacement engine! BTW, the air filters are accessed through the wheel arch liners, which just pop out after releasing a few bolts. Turning the wheel helps with access. The XK has a towing eye underneath the rear bumper - it's a rectangular plate on the sub-frame and you just pass the tow line back through and over a lip to lock it in place. No need to open the boot.

@SuperRon Жыл бұрын

Thanks for watching! well spotted with the rear towing, we couldn't find a tow eye anywhere, will have another look next time! 👍

@wilkodog5252 Жыл бұрын

Refreshing to watch a channel that shows start to finish work, really enjoyed it. New subscriber here😁👍🏻

@SuperRon Жыл бұрын

Thanks for watching, nothing worse than being left hanging at the end of a video 😁

@arjenootes9017 Жыл бұрын

Enjoyed it, especially that all is done in one video and all is shown. Also agree with other comments that an older type engine is not the best for the cars value.

@SuperRon Жыл бұрын

Thanks for watching 😁

@veritas6466 Жыл бұрын

Gorgeous blue! Love it!

@Teoula7 Жыл бұрын

Great work , very organised, nice wok shop.

@SuperRon Жыл бұрын

Thanks for watching 😁

@peterfarbrace3604 Жыл бұрын

Great vid - love that classic range rover in the background ❤️

@SuperRon Жыл бұрын

We did a full resto/recomission on it a few years ago - pre KZfaq. Just been back for a couple of upgrades.

@Handless_handle Жыл бұрын

Good work super Ron! Poor golf being smoked out in behind it!

@SuperRon Жыл бұрын

It had a steam clean 🤣 thanks for watching 😁

@stevebass3992 Жыл бұрын

Nice job. Just to point out, it is not a Ford engine but a Jaguar designed and manufactured although some of the smaller bits are Ford as they owned Jaguar at that time

@SuperRon Жыл бұрын

Thanks for the info, it was a strange one, I didn't see anything stamped Jaguar on the engine at all!

@chrisbaker121924 Жыл бұрын

Yep Jaguar v8 which started life in the x308 in 1998 and of course the original xk8 in 1997

@Jack-P-07 Жыл бұрын

Yes 100%, the Engine was built on the Ford engine assembly line in Wales but is 100% Jaguar designed, which may account for the parts, oddly enough they still often charge Jaguar prices for the parts. @SuperRon awesome video. The 5.0 NA was used in almost all Jaguar models which may account for the slightly different connections. I am no mechanic but have a passion for it, so it is a real treat to see work of this quality done from start to finish. The XK is an extremely good looking car IMO but those air filters are in a slightly peculiar place.

@ingleman.6529 Жыл бұрын

Impressive for a non mechanic like me. Impressed that it could be salvaged. So not true then that a flooded engine equals car written off? Very interesting, thanks for sharing!

@SuperRon Жыл бұрын

It was written off by the insurance company, who quote new parts. But the customer repaired it privately with second hand parts, bear in mind the second hand engine was £6k alone. Thanks for watching 😁

@bobschnittman2856 Жыл бұрын

super sharp Jaguar.

@larrysimon1 Жыл бұрын

Great Vid

@SuperRon Жыл бұрын

Thanks for watching 😁

@damienkearns9922 7 ай бұрын

Great video….could the old engine have any hope with a lot of tlc, or is it just scrap?

@SuperRon 7 ай бұрын

Anything can be saved with enough money (see my latest BMW M5 video) bit it just wasn't cost effective with this.

@awalk5177 8 ай бұрын

The location of the airboxes is really interesting as the previous version X100 XK the air intake is above the 4,2 engine. The 5.0 version looks like a step backwards. I'm curious about the plastic film you placed on the wings to protect them. Where do you get that from ?

@SuperRon 8 ай бұрын

Yes very poor design on this model. The blue film is the stuff painter and decorators use to put down on carpets to keep them clean.

@awalk5177 8 ай бұрын

@@SuperRon Interesting. Thanks for that info.

@lesforets 7 ай бұрын

Good job well done 👍😍👍is possible the water might get in the gearbox 🤔and how much this job would normally cost please 😊

@SuperRon 7 ай бұрын

Thanks for watching 😁 no the gearbox was fine, the car wasn't submerged in water, the engine just sucked it up internally from the low intakes. I'm not sure how much it cost but it was 3-4 days doing the swap.

@lesforets 7 ай бұрын

@@SuperRon thanks 👍 a lot

@boyblunder8889 Жыл бұрын

The boxes are low , but the intake is high , so how is it pulling in water from low down ? Doesn’t seem possible ? The filters looked crispy dry and dusty , not wet

@SuperRon Жыл бұрын

Engines are just a big air pump, suck air in and blow it out. So if the inlet is in water it will suck it up like a straw. It had been sitting in with the insurance company for a few months which is why the paper had dried out.

@jaysimpson6857 Жыл бұрын

What happens to the old engine, will it be reconditioned or broken down?

@SuperRon Жыл бұрын

The customer took it away and I think he sold it as it was.

@LordCeeJay Жыл бұрын

Why so smokey though? White smoke = water, so maybe wet cats? Either that or something wrong with donor engine.

@SuperRon Жыл бұрын

Yes wet exhausts, silencers were still full of water. Soon dried out and passed the MOT emissions straight after 👍

@kennethnichols7664 Жыл бұрын

Flood Damaged is an understatement. That car was used as a Submarine! Who ever owned it must have thought it was a Jeep 4 Wheeler!

@SuperRon Жыл бұрын

It certainly had a good drink! 😁

@petrolhead28 7 ай бұрын

Far better to swap out than rebuild

@SuperRon 7 ай бұрын

In this instance 100%. Thanks for watching 😁

@FranciscoGuerrero-GP Жыл бұрын

Amazing but...why go to ALL that trouble to replace it with a 2009-2011 engine? Those are prone to timing chain failures. I would've gotten the newest engine possible (14-15). Labor and Parts this was How much? $12K USD? Probably more?

@SuperRon Жыл бұрын

The customer sourced the engine and the car himself, I think the engine was £6k and a few days labour fitting it all. Thanks for watching 😁

@cliveshepherd8894 Жыл бұрын

@@SuperRon What was the labour cost Ron?

@SuperRon Жыл бұрын

@@cliveshepherd8894 not sure on that, I don't get involved in the office work.