#12 at time 15:08 is about the easiest one I seen to make and it actually worked

Thank you for the tutorial for those of us who work as copper cable finders in empty houses

Genius ideas!! Thank you!!

The first one seems the easiest I gotta try that thanks!

i remember doing this with my dad when i was really young. he would hold it down with his foot and use a blade to cut off bits...shit took forver if only this video existed back then!

Thnx bhai app na kaida karaya bhot bhot thnxx❤❤❤❤

Wooow rewelacyjne pomysly 😊😊😊 Pozdrowionka ‼️‼️‼️

Congrats and best wishes.

Tu es un génie merci bcp 😉👍👍

For Romex it's faster by hand but for small stranded wire this is awesome. For sure gonna save a bunch of little stabs by the stands. Cool video

It's the nuts I've spent hours stripping cable by hand wow these hacks will really help me loads 👌 👏THKZ 👍👏

Genius ideas.Thank you!❤

TOTAL GENIUS!!!!! MORE CRAFTS, PLEASE!!!!!

Good stuff.

Never seen the cheese grater method before. Interesting concept.

Witam z Polski bardzo ciekawe pomysły zostawiam suba i łapkę w górę pozdrawiam dziękuję za fajne pomysły

Thanks

Clever 🤓

Ou trouver vous cette quantité de câble a dégainer, vol dans des bennes ou chantier ??

I thought number 6 was a failure. You could clearly see that it was not good at stripping wire

U have new su,b bro, good job

@50:00 : Why do you want to strip such length new cables?

53:34 Ахренеть! Не проще ли продать провод как изделие? Больше выгоды получить можно!

Bon travail

Some brilliant ideas there. Could you please tell me were you are getting your copper from. Lol.

the music was great........

Just got me an 80 PC. Rotatory Tool Kit at Harbor Freight tools for just $9.99 + Tax. The warning reads: "This product exposes you to hamfurl chemicals including led, whic is known to the State of California to cause Cancer..... Well?!, I have nothing to worry about: "I'm in Texas, not in California". King of Copper, Howdy?!... can you make a video of things I can do with a rotary tool kit?. Thanks.

hola ingeniero, el numero cinco es un pelapapas?

Good

...i keep stranded wire. 2ft long and over. Great for repairing wiring harnesses

Yo check out this song bro reminds me of your video it’s called in my slab by trade the truth u will trip out haha great work dope shit

Идея с деревянными вальцами на мой взгляд хлипковато выглядит. Через короткое время произойдёт износ дерева, что увеличит зазор и давления не будет хватать для разрушения изоляции. Но подход интересный и нуждается в доработке.

The crank one is the best. No copper was lost during the stripping. Also put a 12v motor to the crank and you can strip wires all day. No dull blades to be replaced which means lower expense.

Ууууу х сколько МЕДИ 😊 класс👍👍👍

Монстр!!!!!!! Особенно бетономешалка!!!!!!

Where can you find all this cables ?

I missed it what do you use to drill the blade

Something I've built has some elements from a few of these. I really like the simplicity of the basic sharpened groove straight tool, maybe offset at whatever angle is most comfortable for the user, but overall a safe method if using both hands, the flexibility of the saw blade giving good tension feedback. Some of the designs with the spring and the full length of the blade are foolish, if you are doing something like this with your hands the last thing you would want is an exposed razor slicing your fingers, feeding those mechanisms will teach you quickly. The larger gage wires they are cutting in many segments are very easy to do with a basic knife, use a rubber band or 2 to bind the handle of a pair of pliers, open them to bite one end of wire, step on the pliers and rake a knife or even just a sharpened piece of metal along the length of the wire, it will destroy the coating enough to pull the wire out. You don't need a box or rig for those sizes. That being said, many of these designs have no adjustment dials or very few options for the amount of effort making them. Maybe clever, but the tools where you are fighting your own other arm are poor choices. You will tire very quickly if output is your goal. Being able to pull through a fixed point with both arms, maybe even your back like a rowing motion is a far superior use of energy. The old shaving blade was interesting, like most things the simplest approach is likely adequate. I don't know if those are replacement blades or need resharpening, I haven't seen one in ages but essentially the same method of dragging a knife along the coating (pull sideways, not toward your body). I have a V-cut roller on a bearing with an adjustable blade from the top, blade has a guard through the knife edge to limit cutting point exposure and add stability, block fixed to the top panel with a threaded rod to the side panel for centering fine adjustment. As is my rig uses one hand to feed start and then hold the box and the other to pull the wire. It's a small 8"x8" I can work while I watch videos online. As it evolves I'll experiment with the RPM stable enough to pull wire off a small motor and maybe incorporate some of these guidance methods with the eye screws onto some flaps on hinges with a locking pin.

I've worked them to death, they work great be gentle with the neck pin. It will break 1st, I just cut the upper part off and keep using.

Where did you find all that copper wire at?

Good ideas:) However at the beginning, I wouldn't AT ALL condone operating an angle grinder moving toward an ungarded hand holding the work, (esp. when so close as it appeared to me in the vid). Something might slip, colide into that bare naked hand and OWeeee! "Dang that HURT!" could quite painfully result. Some kind of clamp or vice would be a lot better to grip hold the work, while cutting away on it. Safety should should be uppermost in mind when ever operating power tools, is what my book declares. Again good ideas though:) what with the multiple different methods you'd intelligently devised. Think it's always good to have more than one way to strip wire, as only one method may not always work on some, certain kind of insulated wires, well....at least not as efficient so.

На видео все гладко и сладко. А начинаешь делать - херабора получается.

How to salvage copper wire from motor coil without damaging it? Please, thank you.

Every thinking ok, but I dont understand why You destroy new cabels?

:) szacun

😲👍

Это он еще про спичьки не знает а узнает и жить станет легче изобретатель.и время сберегет и сил.

I have a question and what's the videos I see them using shrink wrap shrink tubing as part of their project and they always use a lighter even though it's not their first time ever using shrink wrap and most of their videos always use a lighter why not showing proper tool

у меня у одного возник вопрос зачем нужно было портить абсолютно новые провода

At 49:50 ... This guy is a super mcguyver. My bf keeps making crackhead jokes saying 'look at this efficiency.. dudes obviously unsupervised at work and smokes rocks. Gotta be.'

தங்கள் போன் நம்பர் தெரியப்படுத்தவும். நன்றி❤ அருமையான எளிய கண்டுபிடிப்புகள் வாழ்த்துக்கள்❤

Очень долго и нудно, здесь тупых нет...Последние кабеля лучше продать, намного дороже выйдет!

Зачем?!

Где проволоку находишь?

Its a very complicated project. Plz make an easy one.

Что со вторым каналом ?

I can do it faster with just a knife!

Why on the last one?

Расскажем ему про костёр?

👍👍👍👍👍👍👍👍👍👍👍👍👍

Проще было обжечь и не страдать

34:33 that look pretty dangerous, i rather have the blade hidden before i start the drilling.

А многожильный медный слабо?

فقط آخریش

Были бы провода можно в костер и все 😂

Anybody got a life hack on building a milling machine?

阪急5700号車は東芝

Alo

А обязательно было брать новое полотно по металлу и портить его?, можно же было и старое полотно испортить на самоделку.🤔😉

SAFETY PLEASE on build 6 you drilled a hole through a utility knife with the blade extended. If the drill had binded when you were drilling the knife would have spun around cutting through your fingers. At the very least the blade should have been retracted and really the utility knife should have been clamped in a vice before drilling.

Russian ingenuity

Идиотизм разбираться провода , если они, как изделие стоят дороже😢

Почти все варианты откровенно идиотские.

Fire fire fire

4:06

No way not enough pressure maybe with stronger spring

opreste-te, ai inclus si betoniera😂

Large coils of insulated wire for stripping and not actual wiring? Looks like a big mis-appropriation good copper wiring. Unless of course…….

Or you can buy a wire stripping machine for about $100

😅❤

Muy lento video

Why does these videos always show girl hands on the pictire for the video? 😂

10 полная чушь.

Why don't people talk in videos. Liability reasons what

🎉😢😢😢😮😮😮

I quit watching after #15 , the first one. Try stripping some heaver wire or maybe some wire with some sharp kinks. See how far you get. Anybody can strip small perfectly straight wire and you don't need to spend half an hour making some kind of fancy knife either. How dumb! A simple pocket knife will work just fine or any sharp kitchen knife. This is a TOTAL WASTE of time to even begin watching this.

all the stolen copper wires

😆🤒

All the Crackheads will be watching! 😂😂

Method 14, 13 and others similar are weak, they will only work for brand new straight wires (in the case of a bent wire, the bending will cause the blade to cut into the copper and either break the wire or break the blade, and even if not, it will become dull and they will have to be replaced, in method 14 you can't even break off the section because the knife will be too short and you will have to drill and attach a new blade (more fun with replacing than with peeling the wires), these solutions still work for stranded wires, but they are not there may be wires after disassembly because dirt such as dust, sand and cement will quickly blunt the blades. Method 6 is a total misunderstanding, the idea of ​​crushing the wire is absolutely right (it only works with wire), but the quality of the machine and the crank drive are a comedy. And the last method using a concrete mixer is a joke, who peels brand new cable discs that can be sold as a whole several times more expensive than the obtained copper??? Wouldn't it be easier to buy copper rods and pipes in a store and take them from the store to a scrap yard? :P

Kto nie ma miedzi ten na dupie siedzi ];-D.

Работать не пробовал.по помойкам собираешь проволочки и проводочки.не позорся.

Полная хрень этот ролик - воровать провода бухтами, которые дороже продать целиком никто не будет. В 99% случаев приходится снимать изоляцию с кусков провода. Да и чистить одножильные - не такая проблема. А вот многожильные - да, особенно с обмотками из ниток.

Почти все лайфхаки от канала молдавского Mr.theo... жаль, что канала не стало...

Where do you get all that cable from

Ok. 150 % 👍👍👍👍💪👏🇵🇱🚜👍🤣🤣🤣😅

Ты лучше рассажи где провода и кабель берешь, а разделать мы и без твоих советов сможем.

လှပ်တာနာမလည်လှိ့အသေးစိတ်ပြပေးပါနော်