Aaaand it still doesn't work. Seems that when it colds off, stops working again. When I use the hot air gun over the board, or put the drill itself over the stove, works well. But once it's cold again, stops working. Somebody knows what's the problem? 😭

🍺🍺

What happened?

I thought u broke a drill because of me🤣 sorry hope everything goes well and u can manage to fix it

Nah, I bought a broken one and will try to repair it just the way you did, bougie is what my phone made from bought😁

Alex, got the drill open and the electronic board has damage, the triac is blown

Thank you for advice,but the spray is contact cleaner for electrical parts

@@AlexBRestoration But this also happen with contact cleaner, not suitable for this task if you don't clean off the cleaner afterwards.

Thanks man 🍺🍺

Thanks🍺🍺

I'm glad I was able to help you, and you subscribe my channel?

Me to🥰 worth all the money

What grease pump is it please?

Instablaster

@@andressergio1532 ere un. maniya

Thank you for comment,you can find a lots videos with chuck removal and gearbox vsp-2 it's same like in my video.🍺🍺

Sorry but I don't like parkside.🍺🍺

there is no problem thank you

Thank you for watching, check others videos for brushes replacement cuz is hard to explain.

@@AlexBRestoration will do thanks

hey, this problem is caused by moisture on the board, you must get the board dry out by hair drier and it will be ok.

Hi.you have everything here www.mtmc.co.uk/Bosch-PSB-1800-LI-2-/-3603JA3300-/-EU-18-Volt-Spare-Parts__p-162508.aspx

Thank you for comment,You have to open the drill and check inside where is smoke,usually is smoke from carbon brushes and the overheating is from motor and gearbox .

First you have to open the drill to check it because not every time something is broken inside.

With great pleasure if you live in UK🤣🤣🍺🍺

@@AlexBRestoration ..as it happens I do live in the UK..Northants to be a little more precise lol. Of course my question was in part jest..ive just started the replacement of 8 internal doors and the furniture..hence drill for latches etc..ive since also watched horror vids of "run out" drill comparisons with kit far more expensive than mine. I also watched an excellent vid by a young lad explaining exactly where and why this occurs. Seems even fancy drills suffer from the same problem even when new. My thinking at the mo is that I cant see me risking a 24mm hole for the latch case on a 35mm door so im proposing to use a 20 or 22mm and chisel the rest out..anyway I digress. Where did you get your expertise ?..and how much ? ha ha

😅😅I live in Northern Ireland and it's free for you

@@AlexBRestoration free eh..🤔 im not suspicious by nature but free sounds like theres a catch somewhere 🤣

I think is possible but very hard to replace it.

The name is BETA mini grease gun and yes is refillable

@@AlexBRestoration cool, have been looking at some better way than digging in the grease tube. (using very little of the stuff, so a full greasegun is something I want to have )

DC MOTOR 18v 2609003662 this is the cod for motor but in my opinion is to expensive is like half price of brand new drill with batteries and charger,you can find cheap spar parts on ebay.

@@AlexBRestoration thish motor Rs 550?

probably he's reselling as a refurb.

Hi.how many times the leds it's blinking,and you check the drill with a original battery,?

@@AlexBRestoration not the same every time..mostly,it blinks very fast and dont stop,until i release the switch..... sometimes blinks just once,fast.....i did not chack it with original,i dont have. can you tell me,on original battery,are two terminals positive and two negative ? this is the way i connect it to power supply ? maybe i connected wrong ?

It's one by one the others one is for battery temperature,I think your drill is going in safety mode when you press the switch.and definitely you need a original battery 18v lithium ion.

@@AlexBRestoration but,it works,only without rpm regulation,only at max rpm... i think,in safe mode, tool will be shut of

@@AlexBRestoration so pinout is + - + - ? or ++- -

Hi.I have no idea where can you find the electronic diagram,check on Google

Hi.thank you for comment,you need to check the clutch and to do that you need to take down the gearbox and chuck.if there is something broke you have to replace and it is not worth it,but you have to check first🍺🍺

I used heavy duty degreaser and for gears cleaner degreaser

Hi.buy new one cuz it's hard to fix a dc motor like this one.even the carbon brushes it is difficult to replace

Electronics where blown too so already fixed those

Can you be more explicit?sometimes when the dc motor its running intermittently can be brushes,trigger swich or electronic board

@@AlexBRestorationhi 4.2 amps of 19 volts from the laptop adapter. My question is that if the engine is burned, it never turns, right? my engine keeps turning one round or half round.

I used liqui moly contact spray

Honestly, I don't know I brought the cordless drill like that,maybe from moisture, poor quality,it's often happened to me when I unscrew the screws from the batteries.

Very crazy.china made

Thank you for comment I have to open the drill to check where is going the white wire,or to check the electric diagram.

The thick white wire goes to the circuit board!

I cleaned with white spirit and spray clean parts but also you can use fairy,degreaser with hot water.

@@AlexBRestoration yes formetal gears

@@AlexBRestoration ok

Yes

Hi.is BETA 1750M mini grease gun,I both from amazon and the grease is liqui moly grease for bearings.

​@@AlexBRestoration thanks :D