Thanks so much for your help, i learnt alot from you i found your videos along time ago and have adopted all the things you have taught. You even taught me how to cut and hang cornice when nobody else could or did. The way you explained it clicked my mind into understanding how to do it and i now have a skill for life because of you. You've helped me put food on the table for my family so thankyou

I hate that others crap on your help and hard work. Thanks for your video it has helped me allot. Dont worry too much about the negative comments mate. Keep going

Very easy to follow; highly recommended for anyone trying to DIY cornice jobs first time. Thank you.

Thanks for the video. Handy when you need a quik lesson to get you out of trouble. Keep up the great work.

Thanks for taking the time to post these videos, I really appreciate it when professionals share their trade with amateurs. Ignore the negative comments, I notice none of them have posted any videos of their own work!

once again ........ top video...... nice work .

good clips and plenty tips for hanging cornice and coving here............one tip - i always clean each section as i go as sometimes adhesive dries so fast and it can be a bugger to fix if it has set........i love how cornice enhances any room

Fantastic video, I need to hang some cornice and found your lesson really helpful. Thanks for doing them.

excellent and clear advice plasterRepairTips, did a room today with internal to external etc etc, you don't want to see my failed attempt offcut bin, haha. In the end just made ask the corners and then for long straights in between. filled the gaps as best I could, thinking about a little bit of polyfilla and sanding to make it more seamless before I paint. Got a square room to do next so thought I'd watch a few tutorials as I want to get to grips with it without having to make 4 seperate corners and cutting straights to fit. Thanks again for all advice, part 1 was great for the internal/externals etc.

thanks for the video. Really helpful

Nice tips. Thanks mate

Thanks for your comment and support mate. As I keep saying, there's heaps of videos out there on any subject and like me I look at a few and use some of them that suits me. That's where if my videos have helped in any way, that's great!! Glad they have helped you and happy for any constructive criticism. Cheers

Informative video. Alot of good points to help me complete a difficult job.. Thanks. x The Bigfella x Paul

Good vids very helpful I got my entry finished with these tips. I found it hard to find a good tradie this time of year. Happy new year.and thanks

Thanks mate, great stuff.

Thanks a million

Great videos. I'm going to have a go at replacing old cracked 55mm cove with 90mm cove for a more modern clean look. Will cornice adhesive stick to solid plaster painted walls? And painted ceilings. Do I have to do anything to prep my plaster walls after removing my old cornice?

That's great. Thanks for your comment and never be afraid to have a go. Cheers

Hi, Great video series, has taugh me a few things and confirmed a few others I was already doing :). I do a little bit here and there, I am fine with hanging the sheet, setting the sheets and corners etc. I can butter and hang the cornice, but I always end up with a slightly crap mitre, I know you prob do it all the time and I often run around and draw a line at the 50, or 90mm mark, or whatever size cornice I am using, I just cut a block of wood and then run around the ceiling with that. Any tips to make sure I get a good mitre, and also is it possible for you to do a bit of a vid on how to use the small tool, I seem better with the broad knife but I would love to master mitres and the small tool.

great help by watching your video thank you very much you are very relax for what you do.

@dgt79 Great to see it's helped you Regards Nerio from Plaster Repair Tips

Good point. I always keep an eye on the gauge (mixed plaster). Normally I have a good 30 minutes as I know the mix but I do appreciate your comment and yes ALWAYS keep an eye on how the plaster is setting or in your case clean as you go. Many thanks Regards

great vid,you should look up a tool called a JOINT RULE,way easier than a paint scraper

I can appreciate a capable carpenter as you say can cut mitres as described by your comment.. I'm showing traditional plastering tips so that a home handy person can attempt at fixing cornices without buying expensive equipment for a small or once off job. Thanks for the info, is there a video link where we can all see?

thanks for your comment regards

I am hoping to put my coving up this weekend and having watched this vid I think I just might be able to do it I will get back and let you know how I got on great vid

my joins ate pretty poor, I'm away working at the minute, but i plan to sand and plaster them until they are as seamless as possible.

Can any one else work that what you're talking about?? The videos are designed to help any D.I.Y's out there. Looks like a high teck way of doing thing. Is it practical for most of us? I disagree about the truck comment but please send me a link or example of what you are trying to explain to us in better detail. Thanks for your comment by the way. Regards

@willy00078 Glad the video has helped!

what about top coat on internals

Nice vid, you're a pro. I'm struggling with wavy ceilings, wavy walls and angles not 90 degrees. An absolute nightmare. There doesn't seem to be any method for getting this right other than stuffing loads of filler into the gaps which are EVERYWHERE !!

I've watched xXsnitchyXx video and he does a great and fast job! My aim with my videos is not to show how fast I can hang cornices. I wanted to show and help guys out there on how to cut miters for cornices (as the heading says).

My pleasure colin19621.. Don't hesitate in contacing me for any further enquiries and for any Plaster Repair Tips Cheers

loved your commentary few things i do different. but took to long and messy( but do understand trying to teach) no so much your finish and shape more so appearance Plastering is all about the look from start to finish as soon as paint goes on we loose all credit keep it clean and straight

rough! If you do it properly you don't need to clean all the shit off the coving because pros don't get shot all over the coving.

A complete mess !