Corrosive Ammo in an SKS after 2,200 rounds and 1 month of neglect

Рет қаралды 514,978

12 жыл бұрын

AMAZON Store: amzn.to/2H7Lq6Y
PATREON: / iv8888
JOIN USCCA LEGAL SELF DEFENSE NETWORK: usccapartners.com/IV8888
CHECK OUT OUR MUSIC CHANNEL: / guitarsenal
DISCLAIMER: Our videos are strictly for documentary, educational, and entertainment purposes only. All shooting is performed on state-approved firing ranges under the supervision of trained professionals. Imitation or the use of any acts depicted in these videos is solely AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including KZfaq) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of our videos. We do not endorse any specific product and this video is not an attempt to sell you a good or service. We are not a gun store and DO NOT sell or deal in firearms. Such a practice is heavily regulated and subject to applicable laws. We DO NOT sell parts, magazines, or firearms. We are not instructing our viewers on how to modify firearms, accessories or otherwise to change their basic legal function. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.
Fair Use: In the rare instance we include someone else’s footage it is covered in Fair Use for Documentary and Educational purposes with the intention of driving commentary and allowing freedom of speech.

Пікірлер: 868

@bojanmilankovic 12 жыл бұрын

Holy crap. Good on you for having the balls to do this...I've been known to skip meals in order to get mine clean as soon as possible.

11 жыл бұрын

Every time I watch your videos I get so jealous... in our country we aren't allowed to have these beautiful guns. Please keep fighting always for your right to bear arms. Greetings from Argentina.

@sadnessinside123 3 ай бұрын

This may be changing with your new leader in 2024. Am I correct? ;)

@xtralarge069 10 жыл бұрын

Wish I had 2200 rounds to rust my gun up with lol

@abrahamm1325 7 жыл бұрын

XLARGE lmao right. you can barely even find surplus ammo and if you do its too expensive.

@ryanwaterman3473 5 жыл бұрын

abraham m Reload your own ammo.

@jordanlittle5391 5 жыл бұрын

@@abrahamm1325 not in canada lol we get chinese

@shelbicarter3533 5 жыл бұрын

Tulammo is cheap. It’s 40 round for 12 dollars from where I’m at. Only a dollar more then a 20 round box of 223. It’s pretty inexpensive.

@rasputin2750 4 жыл бұрын

@@ryanwaterman3473 > Reload your own ammo > most if not all surplus ammo is berdan primed yeah good luck with that one chief.

@primitivefpv6660 7 жыл бұрын

In my opinion no matter what you shoot you have to clean your gun. don't worry if your ammo you bought is corrosive. The minute you firearm was made it has been under attack by its environment. (mainly librals). Just keep your gun clean. simple

@petset77 7 жыл бұрын

I gave you a thumbs up, but please correctly spell "liberals". There's an "e" in there. ...while I'm independent, I actually lean "liberal", but am well armed. Both political sides have their points, and their faults. The libs aren't coming for your guns, and they're not going to get mine. Have a good evening, and happy shooting. ...and yes, everyone needs to clean their firearms, so thanks.

@bradt3625 7 жыл бұрын

You kinda shot yourself in the foot there

@caseyb1346 7 жыл бұрын

some liberals are, some aren't. Politics just aren't that white and black anymore. I'm a Libertarian Socialist. I absolutely support the right to own and bare arms. I own a SKS just like the one in this video.

@YOLOSWAG420EZ 7 жыл бұрын

How can you be a socialist and a libertarian? I thought basic libertarian thinking was not wanting taxes?

@mannie1952 7 жыл бұрын

I'm a lefty and I love to shoot my SKS. I'm a liberal who wants to take away your guns...and keep them all for myself!cheers

@jshicke 10 жыл бұрын

I bought a Chinese type 56 SKS for $50. The guy who sold it to me complained of double and triple fires when he would go to the range. I got it out of the stock and started cleaning. It became obvious that he had never cleaned it! The firing pin was wedged forward from all the caked up carbon inside. Getting the upper hand guard off was difficult due to all the grit. Cleaned up nice though and shoots just fine now :-)

@RekzysTheTitan 6 жыл бұрын

PCShogun and you could probs sell it for $900-1200 today

@Dixielinemuzik 6 жыл бұрын

NotAMethDealer Not in America.

@joshinez8005 6 жыл бұрын

NotAMethDealer judging that you can find them online for around 200 dollars, 300 with tapco assembly...i don't think he can sell his for that much....

@user-mq1up2fw4r 4 жыл бұрын

@@joshinez8005 no way can you find an SKS Type 56 for 300 anywhere. I've been searching for months and the best I could find was around 450, but the rifle was beat to hell. They are not easy to come by..

@chrisalward2720 4 жыл бұрын

@@user-mq1up2fw4r can find them for 299 to 340 in new Brunswick canada cheap gun here

@bobburro3642 7 жыл бұрын

my baby watched this video and the first words he ever spoke were...wust, wust.

@blacklabel5030 7 жыл бұрын

Gonna know what NOT to let on his guns!

@bobburro3642 7 жыл бұрын

; )

@Gumbie2009 8 жыл бұрын

New drinking game, every time Eric says surface rust or stuff do a shot.

@1Ocqueoc 8 жыл бұрын

+Cutlery Addiction How about when he is shooting and says "Oh Yeah" ?

@kwacker45 8 жыл бұрын

+Randy or okay in most video😀

@bakedveal2624 8 жыл бұрын

+Cutlery Addiction I can drink like a fish, but I'll admit, I'd be plastered walking backwards by the 4 minute mark.

@Johnyrocket70 7 жыл бұрын

2 minutes in I am drunk

@petset77 7 жыл бұрын

How about every time he says he left this rifle without cleaning it "on purpose". I get that. You get that. Eric is just a bit sensitive about having a dirty firearm. Good man.

@MrHobgoblin1396 10 жыл бұрын

corrosive ammo is not a horrible thing to shoot out of your rifle, you just have to clean it really well after you shoot it. i shoot military surplus ammo with my mosin nagant and it is vary accurate. after im done shooting i just use some windex with ammonia on the barrel, bolt, and magazine then use a bore brush down the barrel, a few patches then some oil and i don't have a spot of rust on it

@francismarion1351 8 жыл бұрын

Hoppes #9 It was created with Corrosive in mind. Otherwise any ammonia based household cleaner will do when dealing with a firearm that has fired corrosive ammo

@DeCavalcante 8 жыл бұрын

+Albert Ferri what the fuck? You just walk around spitting good facts and think it's ok?

@shawnhett7648 8 жыл бұрын

+Albert Ferri Hoppes #9 current formula (both oil and bore cleaner) DO NOT!!!! account for corrosive salts. I found out the hard way. Ammonia is not good for corrosive salts, the water in the windex is what does the job, the ammonia just helps the water evap. quicker. the ammonia WILL mess up your wood on your older guns, especially a with a nice oil finish... Just use a spray bottle with water, while the barrel is WARM, not scalding hot.

@billhill7330 8 жыл бұрын

+Albert Ferri Ive used wd 40 on my mosin.

@francismarion1351 8 жыл бұрын

I have used WD 40 and Hoppes 9 together pretty successfully. I haven't fired corrosive ammo in nearly 20 yrs but I have two tins of 440 rds of it for my Mosin. My general rule of thumb is that I'll still fire in a bolt action but I don't want to mess around with anything semi-auto and corrosives. There's just too many nooks and crannies and a gas operating system that can be missed

@francismarion1351 8 жыл бұрын

Don't get me wrong I'm pretty good getting them clean. But the older I get the worse my eyesight is becoming and I would hate to ruin a perfectly good semi auto

@pkspence 10 жыл бұрын

"nice" and "rust" are 2 words I would not normally use in the same sentence. :o)

@Seagull780 9 жыл бұрын

it's nice that there's no rust on my gun.

@djmj12714 9 жыл бұрын

dutchsouthernrockfan Much better :o)

@blacklabel5030 7 жыл бұрын

rust is not nice

@Dr.Zoidberg087 4 жыл бұрын

unless you're looking for a good rat rod body....

@zulucowboy 11 жыл бұрын

Point taken on this video...I appreciate your sacrifice. I've got some of that corrosive ammo, and I was curious about what might happen. Thanks for making this video!

@brodiemiller5024 9 жыл бұрын

this makes me so sad to see a rifle in this condition.

@BattlegroundsFTW 8 жыл бұрын

+AllOrNothinEnt Collectors would disagree with you...

@TotalDbag24 8 жыл бұрын

+AllOrNothinEnt It's not well used, it's just plain neglected. I'm curious why he did it with a nice sks and not a cheap(er) Nagant.

@Alexn1067 12 жыл бұрын

thank you for doing this video eric. Not very many people would risk their weapon to educate others. It also gives an idea into exactly what corrosive ammo does and how long you have before damage is done

@mikemower1939 10 жыл бұрын

Thanks, gives us a good idea of how soon the damage can set in with corrosive ammo. I felt guilty when I let my Mosin go 2-3 days after shooting 60 rounds of corrosive in the past, and since then picked up some Russian Brown Bear non-corrosive. I only buy non-corrosive Brown Bear or Tula for my SKS.

@MyMuschilover 9 жыл бұрын

It would be interesting to see what happened to the bore itself and the gas tube. I doubt all that surface rust on other parts would prevent it from working well.

@avianphlu5397 11 жыл бұрын

how did the bore look? actually for all that ammo and lack of cleaning it still looked really good. A lot better than I would have expected.

@HopsAndLead 12 жыл бұрын

Even when I let my friends fire a few mags through my AR, I always tear down the whole bolt carrier and clean the whole upper. When I test fired 5 rounds in my XD .45 after changing the firing pin spring. I completely cleaned it after

@ATFisGay 2 жыл бұрын

Just terrible

@nothsa1107 7 жыл бұрын

"Nice Coat of Surface Rust" Love this guy!

@ornerycuss9342 10 жыл бұрын

This is a great video! Thank you so much for making that sacrifice of that rifle for our education. One question: How well does simplegreen and water really work? I would have guessed that the water aspect might cause the gun to rust further? Is there a ratio of simplegreen:water that you go by to keep the solution gun-friendly and rust-free?

@catfishredneck88 11 жыл бұрын

already shared this with two people with older guns since i seen it 3 days ago. great vid.

@wigon 12 жыл бұрын

I remember the first time I ever fired my SKS, it was with corrosive surplus ammo and fortunately I was with a friend familiar with that ammo who made me clean the rifle in a bathtub full of warm water & soap. That worked fairly well followed by a thorough drying which was then followed by a light oiling with CLP. Even with regular ammo, it's not a bad idea to do this type of cleaning now and then to remove old gunk in small areas as long as you make sure to it well dry and oil it afterwards.

@kalebarcole9017 8 жыл бұрын

figure its a good idea to put some windex down gas tube and barrel, dry with a few patches and follow with some hoppes elite t3 before i drive 2 hours home to do a full clean like in vid? Or would i be ok throwing gun in bag and cleaning thoroughly when i get home?

@KabukiHai 10 жыл бұрын

Hey Vet, what do you use to clean the corrosive ammo? Great video btw

@1628gary 3 жыл бұрын

'Simple Green' never really worked that well w/ me; I've always used Hoppes #9 solvent and/or Ballistol as soon as reasonably possible, usually the same day. Works great!

@76Stankfinger 12 жыл бұрын

I used your suggestion from one of your videos a long time ago regarding corrosive ammo. I pour a little Birchwood Casey Muzzle Magic #77 into the chamber and barrel and run nylon brush through it a couple of times before heading home from the range. Works like a charm every time. Thanks again.

@i_dodge_trees 11 жыл бұрын

1400 rounds through mine since cleaning over a 6 month period in british columbia humidity. Only problem I had was the firing pin sticking forward once which is more of an advantage in my eyes :)

@theduke502 12 жыл бұрын

Thanks Eric. I appreciate the info. Good video!

@4750548 8 жыл бұрын

how do you feel on the bolt mod in which you mill down on each side of the bolt to allow the after market 20 and 30 round mags to be remover while the bolt is still forward

@tylerhenrich 9 жыл бұрын

Very informative. Answered a question I have always had.

@skylerslack5677 7 жыл бұрын

what does the inside of the bore look like?

@patrickpost3269 7 жыл бұрын

Hi Eric. Thanks for the info but i have a question. Do you just run the simple green and a brush down the barrel???

@patdufresne6209 4 жыл бұрын

WHat kind of soap do you normally use to break down the corrossive salts? I am also considering an ultrasonic cleaner. Thanks, and happy new year.

@ScalyOJ 11 жыл бұрын

awesome video! thanks for the demonstration

@r.jackson8972 10 жыл бұрын

I really appreciate the vid, I always wondered what would happen. Big fan of your vids.

@gacastillo21 12 жыл бұрын

Thank for sharing this with us. Have a good one!

@johnh7605 9 жыл бұрын

At least it cleans up! Also, I like using CLP, helps break down the carbon and rust very nicely!

@roadapple66 12 жыл бұрын

Good video. You are right about proper, timely cleaning, but I have cleaned some AR's right after the range and there was much more carbon, but no rust. All in all, that Yugo ammo seems pretty clean! I once loaned a Chilean Mauser to a buddy, who shot corrosive ammo through it, and didn't bother to clean it. Had I known he was using old, surplus ammo; I would have never let him use it. He finally brought it back (after 2 months), not cleaned. I found the bore was pitted when I cleaned it.

@jdrop40 12 жыл бұрын

Good vid. really gets the point across. Always clean your firearms!!!!

@l3nnz3 12 жыл бұрын

mighty fine rifle I must say. Looks almost exactly like mine, minus the corrosion, lol. Thanks for the vid, greatly appreciate you taking your time to do this for us. You sir, are a scholar and a gentleman.

@scojohwsj 12 жыл бұрын

Hey Guys, love your videos. I feel like I know you, Eric, Barry and all. Very instructional and entertaining. If I ever get down to Atlanta area again, maybe I'll drop by the shop.

@50calorie82 5 жыл бұрын

Would spring will rust further after coming in contact with water ?

@TNCelt1 11 жыл бұрын

Good video. I am forwarding this to several of my friends who are new to being gun owners.

@orangemouth 12 жыл бұрын

Gun Gripes! Eric and Berry I'll be seeing you guys in July, headed that way for a trip through Atlanta on up to Nashville. I think I'm gonna buy a PLR 16 from yall. Can't wait to see you guys and God bless!

@MrShawnlloyd 12 жыл бұрын

great topic, just yesterday I was doing research on corrosive ammo remedies

@leowolf8891 6 жыл бұрын

Question- The SKS model D: how can you tell that you are buying this model. Is the model number on the side of the gun? Thanks for your help. Leo Wolf

@Levi_The_Giant 12 жыл бұрын

I would also mention that spray lubricant/protectant (Rem Oil in my case) is great to get rid of small patches of surface rust. Dirties up a patch quite well.

@djack8139 6 жыл бұрын

Hey what kind of muzzle brake you have on there and does it work good been wanting one for my sks?

@Marine052191 10 жыл бұрын

@Matthew Smith, rubbing alcohol will just take off the oils from your hands, and dry up old oil from the action. I suggest CLP, or M Pro 7, but Rubbing alcohol will dry up old oils, and it will not harm the finish.

@bigrebone 6 жыл бұрын

Eric, How long did you soak the rifle in the Simple Green before you started scrubbing?

@gbshreds 10 жыл бұрын

great video! new sks owner... thanks for the help :)

@bandofbrothers122 12 жыл бұрын

finally,thank you for posting this

@GrantP1974 6 жыл бұрын

Should you dismantle your bolt and clean the firing pin each time you use corrosive ammo?

@STLSNIPER 6 жыл бұрын

I use pure simple green in a small plastic container with a locking lid to clean the bolt, carrier, small gas piston rod and spring, etc. It works REALLY well. Put the parts in, shake it up, and let it sit for a few minutes. The simple green turns brown right in front of you...

@crypto_pinto2660 5 жыл бұрын

Was that the best solvent to use Simple Green and water mix? What about ballistol? Or Hoppe's?

@taj1234100 6 жыл бұрын

When I got mine it was rusted up also, I took it apart and put all the components in Rustolium over night and washed it with water. All rust gone. Works great.

@dandingo13 12 жыл бұрын

I did the same with nearly the exact same amount of rounds and time left sitting after shooting. My M59's barrel was coated with rust. I'm talking bad. I had to put a cleaning rod on my drill with a wire brush on the end and let the barrel soak overnight in CLR. After A LOT of elbow grease, I got it back to shooting condition. That's learning the hard way what corrosive ammo does to a non-chrome lined barrel!

@chrisr069 12 жыл бұрын

Where do I get that elbow grease you mentioned? j/k :-)

@Chrisrico1 10 жыл бұрын

Good video. I probably won't ever shoot corrosive but good to see the results of not cleaning.

@CDSJFIVEONENINE 7 жыл бұрын

What's the BEST method & or products to use when cleaning an Sks??? (HELP!! S.O S.) I've got MAJOR RUST ON MY SLIDING BOLT/BOLT CHAMBER KNOB

@MeanOneMeanOne 11 жыл бұрын

Geez, up here in Washington state I've been looking for a type M for over a year now with no luck. Great vid!!!

@DaytonaRoadster 12 жыл бұрын

how much to re-parkerize something? I'm needing an AR upper and lower (both stripped) and maybe a barrel?

@84SuperDom 12 жыл бұрын

Great vid! Do you know what the cleaning regime was for the soviets was as far as how often they where supposed to clean their weapons?

@TheAngler2210 6 жыл бұрын

arent the bolts and carriers chrome-plated, why did these start to develop surface rust?

@gobigorgohomenow101 12 жыл бұрын

@Iraqveteran8888 I have a Savage model 4 C that was my grandpas, it has been in my family for four or five generations now. Atleast I'm fifth generation to ever shoot it. It had not been cleaned once and would never eject bullet. I spent four hours, an entire bottle of solvent, over 100 patches and its working like brand new, their was so much lead fowling that you could barely see any rifeling, now its dead accurate at 150 yards, and works like a charm, just shows that cleaning does help

@pyzik200 12 жыл бұрын

Thanks for making the video, I really enjoyed it. I don't shoot any corrosive ammo, but this is a good reference should I ever find some on cheap enough to get my attention.

@Jacgren 12 жыл бұрын

Just wondering, as I'm fairly new to firearms ownership, how would you properly clean a rifle (preferably AK style) after using corrosive surplus ammo? I want to try and prevent rust build up like this.

@coreyguy5216 3 жыл бұрын

So I just bought hey SKS barreled receiver from Apex but it's Heavenly corroded can it be saved

@thegatesofsleep 6 жыл бұрын

I’ve used plenty of this corrosive 7.62x39 ammo and I’ve had no issues. I always clean my firearms after every use regardless of what ammo i put through it.

@PetesClassicCycle 10 жыл бұрын

What sort of simple green to water ration do you guys recommend?

@xoticgunnut 11 жыл бұрын

This video was tuff too watch being an SKS lover. But excellent job and thanks for the sacrifice!

@DaytonaRoadster 12 жыл бұрын

ok well i got the colt XM duracoat, so i can do that then, how much for just the barrel in grey?

@ipponutoo 12 жыл бұрын

Nice video! Did the gun have any problems at all cycling the corrosive ammo, even during the last few hundred rounds? Thanks!

@johnnyckrock 8 жыл бұрын

What about the bore? Can that be damaged from corrosive ammo? Would it be permanent?

@juliogonzo2718 6 жыл бұрын

I bought a tula refurb. Haven't put a round through it, prob won't. Action spring, piston extension spring and sear spring had minor rust. Everything else looks good. Soaked springs in rust remover sure there's mild pitting. Should I buy new springs or leave er alone?

@oranmcdougall2650 6 жыл бұрын

I'd do both, leave them alone and(take it for a test drive) by some spares just in case if your able to. That way you'll know if your rifle works and you can fix it when you need to ^^

@makun16 12 жыл бұрын

I was shooting surplus 5.45 and left the piston dirty for a couple days. When I came back, there was huge pockets of rust that had formed all over. It even left pits on the shaft of the piston and it is made from stainless.

@weilki451 12 жыл бұрын

thanks for the info couldn't make it without it

@shredguitar6 12 жыл бұрын

Would just using solvent take off the rust? Are you going to coat it wiith oil before reassembling, will the water cause it to rust again? Sorry for asking so many questions.

@matthaushetzenauer2591 6 жыл бұрын

Does anyone know if you could substitute simple green for pine sol? Thanks :D

@joshuafootman3593 11 жыл бұрын

I have a sks in the same condition as yours but it has been sitting longer than a month Mine has been down for a couple years. How did you clean the barrel and what did you use.

@Dharmanarchist 8 жыл бұрын

2 parts liquid Ballistol, 8 parts water, mix in spray bottle. Used it for years on both black powder and corrosive ammo. Spray parts thoroughly and allow to soak for a few minutes. Clean, lubricate and re-assemble. What we did in he Army, I still do- the next day, tear down again, wipe parts, lubricate as necessary and re-assemble. You will be surprised what soaks out of the cracks during the night.

@THREESHOTBANDIT 12 жыл бұрын

What did the bore look like on that rifle? I have a 91-30 that I shot a bunch of surplus corrosive stuff in int and didn't clean it for a couple of weeks and the bore is pitted terribly. I'll probably have to replace the barrell.

@mansonandsatanrock 8 жыл бұрын

so every time after shooting corrosive you have to take everything apart and clean it? Or is it just because you let it sit, that you had to take the trigger group out and remove the stock? and normally after shooting you just need to clean the inside of the barrel and gas tube?

@12799MaDeuce 8 жыл бұрын

Clean thoroughly/completely every time you shoot corrosive ammo. Spending a little time on preventative maintenance now will save you a big headache later.

@sonofliberty92 11 жыл бұрын

I see you have a muzzle break. Is that one you bought separate from the rifle? I know you can get them for pretty cheap. Are the worth it? Also what kind of break is that? Looking to maybe get one for my Chinese type 56

@someasianguy3793 5 жыл бұрын

You could weld up and grind down that chipped extractor too I'm sure, honestly unless there's a stated specific alloy for these metals I think anything shiny and hard went in the kiln for processing

@koedstorm 8 жыл бұрын

That chipped extractor looks like an old damage, the edges seems rounded off from post-break wear

@j.danaclark89 8 жыл бұрын

That went through my head too.

@NYG5 8 жыл бұрын

+J. Dana Clark yeah, seemed like it broke off too cleanly, as opposed to it disintegrating away

@AndrewBrowner 6 жыл бұрын

its probably been like that since 1952... no need to replace it but masewell throw money on the fire "for safetys sake"

@docroot1 11 жыл бұрын

Iraqvet8888 so is it your opinion that shooting the surplus "corrosive" stuff is pretty much fine as long as you clean after each use? I have an SKS and a Mosin Nagant and that Eastern Block surplus stuff is very tempting.....just don't want to ruin my rifles. Maybe just good ammo just to store away in case of SHTF?

@Marine052191 10 жыл бұрын

@Matthew Smith, In the Marines I was taught, Weapon, gear, body. That rifle you own will take care of you, if you take care of it. Now, go get some Hoppe's #9 bore copper solvent, and Break Free CLP, maybe a silicone gun rag for surface rust too.

@johnyblaze11 10 жыл бұрын

can rubbing alcohol help to or would it ruin the parts?

@CelticArmory 12 жыл бұрын

I love Simple Green, that stuff kicks butt.

@bionicbaer 12 жыл бұрын

What did the bore look like and how did you clean it?

@wolf14900 12 жыл бұрын

When it comes to corrosive ammo is 7n6 worse the m76 ball or are they both milady corrosive?

@therealbillrichardson 11 жыл бұрын

What is the best mixture for cleaning after firing that type of ammo? Would simple green work for after shooting cleaning?

@fullsteam208 2 жыл бұрын

Thank you for the great video. How do you tell if the shells you are using are corrosive? Or not?

@R_K_S2401 Жыл бұрын

If it is Old military Surplus ammunition it will most likely be corrosive. If it is new production ammunition then it is ok. Very old ammunition used to have salt in the primer causing your gun to corrode if you didn't clean it with water

@rumpleforeskin5064 3 жыл бұрын

Good vid, haha your hands look like they are moving ultra sonic . Simple green and water I am going to give that a shot 👍👍

@willbaack9146 9 жыл бұрын

In the Army we used straight solvent tanks to clean the Browning .50s. Grease Em back up, good to go.

@billcritical 11 жыл бұрын

Would it be advisable to bake all of the metal parts at say 200-300 degrees to completely dry the metal or would that be overkill? I work in the semiconductor industry and have learned that steel can hold onto moisture for a very long time at room temp unless it's "baked out."

@jon27d 12 жыл бұрын

I've always used Hoppes #9 for corrosive ammo solvent. How does simple green compare for effectiveness (and which simple green version are you using)?

@zwordsman 8 жыл бұрын

So.. are corrosive better or cheaper or something? WHy do people use it over other ammo? Also I' need to find basic gun maintance stuff.. Like gun cleaning basics too

@zwordsman 8 жыл бұрын

+Zwordsman heh.. which is right on the sidee bar there from this channel

@koedstorm 12 жыл бұрын

How do you prevent rust on the trigger group? there are a lot of surfaces and hard-to-reach areas.