Рет қаралды 100,842
Hey guys! You asked for it! So here it is! A breakdown of my Sans mask!
Quick tip I forgot to mention: I get all my electronics from Tayda Electronics! Everything I need (LEDs, wires, switches, battery holders, etc...) come from there: www.taydaelectronics.com/
Base construction: Newspaper and masking tape to create the shape
Cover in plastic/cling wrap to begin molding process
I used this stuff (www.joann.com/active-4inx180in...) to mold the base.
Once that was done I used SO MANY LAYERS of wood glue, wood filler, Mod Podge and Gesso to strengthen it and smooth it out.
Once I was happy I spray primed it with Rustoleum spray primer in white. Then just used acrylic paint for details.
Eyes and nose were black stretch fabric. Mouth was white stretch fabric.
Wiring Diagram: chiherahcosplay.tumblr.com/pos...
Electronics list is:
2x White LEDS: www.taydaelectronics.com/leds/...
1x Blue LED: www.taydaelectronics.com/leds/...
1x battery holder: www.taydaelectronics.com/conne...
1x 3pt slide switch: www.taydaelectronics.com/elect...
then the wiring, I think about 5 ft each just to be safe:
red: www.taydaelectronics.com/hardw...
black: www.taydaelectronics.com/hardw...
(I like to use red/black wires to indicate positive/negative input/output; you'll also want stranded if you're going to do parallel circuits, it makes life easier lol)
Hope this helps! Let me know if you have any other questions! :)
Background music is Undertale - Sans (Remix) by Sundercade: www.youtube.com/watch?v=nJ2-S...
Megalovania/Sans/Undertale (c) Toby Fox
Thanks for watching!
Facebook: / chiherah
Instagram: / chiherah
Tumblr: / chiherahcosplay
Website: www.chiherah.com/