Coupling Uncoupling

Рет қаралды 95,682

ATA Associates

Күн бұрын

Step by step instruction for coupling and uncoupling a tractor trailer rig.

Пікірлер: 43

@hamzaomar6546 2 жыл бұрын

Uncoupling and coupling first engine off, transmission neutral, both parking brake on,wheel chocks, low the landing gear, unlock fifth wheel handles,disconnect air lines, go forward until ur fifth wheel comes out of trailer, fifth wheel and trailer are separated, jaw open ,trailer is stable with landed gear,driver truck right , left and straight, with four away flash do truck inspection, bot gland hard no crack, no damage, all fasteners no crack,no damage, tight and secure,electrical lines no crack, no damage, tight and secure, fifth wheel have enough grease, all coupler plates no crack ,no damage all fasteners tight and secure, fifth wheel pins no crack ,no damage, fifth wheel lock is in lock position on crack, no damage do inspection both three side after truck inspection driver the truck back until ur fifth wheel and trailer hve good space, trailer high is good, fifth wheel and kingpin are straight line, kingpin no crack ,no damage, have enough grease, trailer coupler no crack, no damage , do trailer inspection, both gland hards no crack ,no damage , all fasteners tight and secure, electrical line no crack ,no damage all fasteners tight and secure connect to truck body, connect all air lines , do tug test and air leaks that is my uncoupling and coupling exam good lucky all new students I hpe u get knowledge

@MarvR0914 5 жыл бұрын

Great content, it assisted with the passing the endorsement exam.

@moralesruben974 7 жыл бұрын

thanks for your help good video!!!!

@1580rayhazel 10 жыл бұрын

Merry Christmas 2013. Thanks for your help

@sonnypruitt6639 6 жыл бұрын

Merry Christmas 2017. And so it goes.

@danstafford5977 3 жыл бұрын

When pulling out the red button trailer air supply... that will release all the air of the trailer locking the trailer brakes!

@tkimble8165 8 жыл бұрын

Thank you!

@fisoxlt 10 жыл бұрын

Well, now that we've seen how not to couple a tractor and trailer, we'd like to see the video on the correct way.

@TexasTornado66 6 жыл бұрын

This way is still required for the national CDL test...to connect the airlines and charge the brakes first...they have not updated the CDL test since the invention of spring brakes in the 1970s. In 'real life' you do not need to connect the airlines first.

@j.manuelcharriez8115 3 жыл бұрын

👍🏻

@frazzledgrey 10 жыл бұрын

Interesting Video Everything Looked good except Charging the Trailers Brakes before connecting it to the Truck... Although prior to 1970 most Trailer Brakes Needed to be Charged with Air to be On! So, the 'hooking up' demonstrated in this Video would be Correct for the 1960's ! D

@TexasTornado66 6 жыл бұрын

You are correct...but the CDL test still requires this step on the test. They have not updated the CDL test since the 1970s.

@medhatbiram5736 10 жыл бұрын

Exultant .

@claydinerobeatz8633 4 жыл бұрын

7:29 for step 10: pull fifth wheel release hatch to open position

@e61r61b61 6 жыл бұрын

did I miss something at what point did he pretrip the trailer and check the lights

@richardgreen8466 8 жыл бұрын

Yeah

@horsse5908 10 жыл бұрын

Before he coupled the trailer he charged the trailer without chocking the trailer tires. A big no-no. Either chock the tires or couple tractor-trailer before charging the brakes on the trailer. Stay safe drivers!!

@robertolson7304 9 жыл бұрын

depends on the state.. some states require you to charge the system with or without chocks..

@danstafford5977 3 жыл бұрын

@@robertolson7304 That trailer the brakes are already locked... connecting the red airline does not unlock the brakes... until you Supply Air to the trailer by pushing the red Air Supply buttons in... it takes air to release the trailer brakes!!!!

@danstafford5977 3 жыл бұрын

@@robertolson7304 What CDL school did you go to?

@danstafford5977 3 жыл бұрын

Supplying Air to the trailer via the red button pushed in is what releases the brakes!

@danstafford5977 3 жыл бұрын

If your tractor is not hooked to the Kingpin first... and you Supply Air to the trailer which releasing the brakes the trailer May roll-away!

@Byctap 2 жыл бұрын

You should put on the trailer park brake before coupling.

@autohog 7 жыл бұрын

Question, should a tug test be done prior to hooking up the air lines so you know the fifth wheel jaws are locked around the kingpin? Or do you attach the air lines and do a tug test in order to check the trailer brakes? Also, it seems like it would be a good idea to chock the wheels of the trailer prior to coupling to make sure the trailer doesn't move. I'm a brand new driver and would really appreciate your feedback.Thanks

@ballparkweiner1 7 жыл бұрын

You can do a tug test with or without the lines on, if on , just don't charge the system with air. Then get out and look to see if the release handle is all the way in and check to see if the jaws are around the kingpin and locked, then charge the trailer(red) valve and if you have a trolley, pull down on it to check for service side leaks. But, keep the tractor protection valve(yellow) set.

@autohog 7 жыл бұрын

Thanks, I never thought about coupling the lines but not charging the trailer brakes.

@Strawstarberry 8 жыл бұрын

step 15 translated: get your stuff out of my truck and stop wasting company time

@davert2676 9 жыл бұрын

How do you know were to keep the faith wheel?

@Byctap 2 жыл бұрын

Keep the faith wheel well inflated with air. The air pressure should be 85 to 100 PSI. 😀

@davert2676 9 жыл бұрын

Can you make a video on backing?

@Byctap 2 жыл бұрын

Step back and make selfie. 😀

@buttmuffins3586 5 жыл бұрын

How to get 5th wheel grease all over your lines 101....

@donotneed2250 8 жыл бұрын

And this was made in what year? I went to a 10 week school in 1991 and we saw videos from the ATA and I don't recall ever seeing this one. Maybe because there are steps that can/should be left out. And I have yet to see a video showing what to do when you are picking up a trailer that was dropped too high or too low by an idiot driver and there isn't anyone around but yourself. That's why I keep a pair of either four by four or six by six blocks of wood in my side box...

@TexasTornado66 6 жыл бұрын

@KastaRules 8 жыл бұрын

You are doing it all wrong! -Coupling the trailer: Step one: approach the trailer at any angle Step two: press the coupling key on the keyboard (usually it's "T") Done! -Uncoupling the trailer: Step one: park anywhere you'd like Step two: press the same key as above Done! Believe me. I've played American Truck Simulator.

@WPGinterceptor460Interceptor 10 жыл бұрын

why the heck would you CHARGE the trailer before you hook up?? are you crazy.. that releases the trailer brakes.. if those wheels arnt chockd the trailer could roll away.. YET then you apply trailer brakes then hook up!! wierd!! hook up to trailer, tug test, then you can charge trailer!

@WPGinterceptor460Interceptor 7 жыл бұрын

youtube search "Coupling and Uncoupling Tutorial" by J-TECH.... that's the proper way to do it!!! NEVER EVER EVER, charge trailor if its not hooked up to truck!

@F3RCH0X 7 жыл бұрын

Coupppling hd mooovie here => twitter.com/2b325b39a6ad4fdb6/status/824453567545094144

@autohog 7 жыл бұрын

Now I'm confused, thats what the DMV handbook says to do.

@BodyByKymXclusive 7 жыл бұрын

autohog Go by the book

@TexasTornado66 6 жыл бұрын

The DMV/CDL test is OLD and still says to charge the trailer first. Spring brakes were invented in the 1970s, but the CDL book/test has not been updated since the 1970s. Old trailers without spring brakes are unheard of on the road, they mainly are in a farmer's field as a storage unit.

@danstafford5977 3 жыл бұрын

Misinformation... always hook your Kingpin first... before supplying Air to the trailer... air unlocks your trailer brakes!