JBugs - Father & Son - 1972 VW Baja Bug

JBugs - Father & Son - 1972 VW Baja Bug - Bus Trans in a Bug

Рет қаралды 2,124

3 ай бұрын

Nathan and Sam were determined to get Nate's Baja Bug to Desert Dub's 3rd Annual Vintage Volkswagen Car Show. With that end in mind they spent the better part of two weeks rushing to get Nate's car, a 1972 Standard Beetle that had last been registered in 1992, driving again. With the goal of running a 32" or taller rear tire, a Bus transmission, with it's bigger ring and pinion being better suited for that tire, is swapped in. Typically there are a couple of ways of doing the install, a standard "bolt-in" kit that mounts the transmission to the stock mounts on the chassis, but requires cutting the body, removing the parking brake handle on the tunnel and running a shift rod and shift box on top of the tunnel. Or there is a "10 degree kit" which requires cutting the chassis, but not the body. Most importantly to Sam, it keeps the shift rod in place in the tunnel. This means less cutting of the body, a stock rear seat can be used and the car remains more sealed up.
Anyway, Sam has never been one to stick to the normal way of going about things and doesn't mind coming at things from a different angle. So he decided to modify the EMPI kit and the chassis and modified it and the chassis and came up with his own "7 degree kit". Along the way, you'll see him make his own tool since he couldn't find one, a friend stops by and at the end, the 002 Bus transmission will have a new home in the back of a 1972 Beetle chassis.
-------------------------------------------------------------
All parts used in this video that are available at: www.jbugs.com/
www.jbugs.com/product/3195.html - EMPI Bus Trans to Bug Kit
Tool that SHOULD have been used (if Sam had found his)
www.jbugs.com/product/5773.html - IRS Pivot Bolt Socket
-------------------------------------------------------------
Follow us on our social media accounts!
Instagram - / jbugs_california_pacific
Facebook - / jbugsvwparts
Twitter - / jbugsvwparts
-------------------------------------------------------------
Videos are intended for entertainment purposes. Factory specifications should be followed when performing any task on your vehicle.

Пікірлер: 18

@uffeibsen8872 3 ай бұрын

Fantastic Father Son project !!!!!!!!!!!!!

@Sam_Mebane 3 ай бұрын

Thank you, we are enjoying it!

@user-yd7wo3xv4l 3 ай бұрын

So awesome Sam and Nate!! Lets go!! 💯👍

@Sam_Mebane 3 ай бұрын

Thanks!

@garyjones2582 3 ай бұрын

Looking good guys, thanks for bringing us along...

@Sam_Mebane 3 ай бұрын

Thank you Gary!

@hotroddevils5031 3 ай бұрын

Nice "working with what you've got" removing the pivot bolts! Your modified 10degree kit looks like less work and fabrication than the actual 10degree kit, and much cheaper! In my next video I'll be installing my transaxle in my Baja. I also wanted to run the shifter thru the tunnel...I went with a 5 rib, all Weddle internals and their bus to bug bell housing and dropped nosecone so I can use a solid mount bug kit...will make for simple installation but not the cheapest way to go😢 I'm also going to cover all the options for bus to bug mounts, their cost and fabrication required. Nice job as always, keep up the good work guys!

@Kylezirkus1153 3 ай бұрын

So awesome! Its looking great Sam!!

@Sam_Mebane 3 ай бұрын

Thanks Kyle, sorry, I should have given you the heads up about the cameo!

@Tanks-Link 3 ай бұрын

Mine are 17 mm Allen head bolts on my rear arms. I just went down and bought a 17 mm Allen head cut 2 inches off the end and put it put it on a socket and then I use my impact.

@Sam_Mebane 3 ай бұрын

I could have just gone to work and got one the next day but I didn't want to so I made one.

@Tanks-Link 3 ай бұрын

Also, that's the wrong adapter plate for a bus tranny one the one you need just has a couple holes in it at the bolts go through the motor through the transmission into that plate

@Sam_Mebane 3 ай бұрын

If you say so, this one came pre-boxed, brand new as a Bus to Bug adapter, and it's in, with a Bus transmission, in a Bug.

@RichardMurphyMurph 17 күн бұрын

Hey I have a question how do I get my vw motor is not level how do I level it

@Sam_Mebane 17 күн бұрын

The engine mounts to the transmission, so if the engine isn't sitting level, then the transmission isn't level. Most likely this is because the transmission mounts are worn out or broken.

@RichardMurphyMurph 17 күн бұрын

@@Sam_Mebane there is a mounti plate that has two set of bolt holes.One set is lower than the other set and it is in the top set should I try the lower set I

@RichardMurphyMurph 17 күн бұрын

I always thought the bottom ones were for putting some kind of guard on And thanks for replying to me I can keep a car running to get back and forth to work but I'm not a macanice sorry for the bad spelling didn't pay attention in school to late now thanks again for all the information

@Sam_Mebane 17 күн бұрын

@@RichardMurphyMurph it sounds like you might have an aftermarket mount (like this - www.jbugs.com/product/9530.html) which does have two additional holes for a rear bumper. The stock rear transmission mounting bracket (for 1972 and older Beetles, like this - www.wolfsburgwest.com/cart/DetailsList.cfm?ID=111301255) that bolts in between the two frame horns only has two large holes. Either way, there is a small amount of play in any of the mounts. With the engine out, you might try loosening the bolts for the all the transmission mounts and brackets. Then shift the transmission as needed to make sure the engine mounting points are level, and tighten up all the bolts.