I said wow too when he did the back and also how he cut the bottom of the legs to match the angle with the floor. Simple & genius. This turned out so beautiful.

Thank you for the compliment, hope you had a lovely weekend! 🍻🍻🍻

Yeah that was horrendous! I never got the bearings right for that jig gave up on it in the end. I hope you had a lovely Christmas! 🍻😊🍻

Thanks Stephen 👍 the hard part is sanding them and getting the size to match the mortise 😬

I'll agree, I've envisioned such an item for a long time and (unusual for me) I never really started to design and build such a thing. In the meantime, I'll be waiting to see dovetails on your mortise and tenon joints, LOL. Great work!

Thanks buddy ☺️ I’m guessing gopnik means chav?

That’s nice of you to say, I mean some of those vids the colour is all wrong, the sound is bad etc etc but then that’s me talking 😂

What a lovely complement 🤗🤗🤗 Hands down the nicest compliment I’ve ever had!!! Thank you so much, you’ve made me pause and soak that up and smile 😊

@@HewAndAwe I'm happy that I made you happy. You have no idea how much your videos helped me rn for some reason. Thanks and keep up the good work

Haha - is fun, but damn messy!

Charles Burghardt Thanks Charles - bloody messy though 😬

"Man walks into a gay bar, say's to a fella can I push....?" Thats my best performing vid mate, well here on youtube that is.

Thank you Bruce, appreciate your complement! Hope youre well!

Thank you Mariano! Hope youre well!!!

Muito obrigado, muito gentil da sua parte!

Thank you 😊

Gracias por el cumplido

Cheers Matt! Hope you’re u have a lovely Christmas! 🍻😊🍻

Thank you Drew, appreciate it bud!

Muchas gracias Fede!

Merci beaucoup pour le complément!

Спасибо большое за комплимент. Спасибо за субтитры тоже, надеюсь, я не разочарую - надеюсь, что вы здоровы и в безопасности!

Thank you John, I appreciate the complement mate!

Thank you David! Hope youre well!

I’d love to hear any constructive criticism mate?! My early vids yeah I know but the later vids...👍

Thank you Petr, hope youre well!

Muchas gracias!

Thank you for the complement!

@@HewAndAwe very nice brother! I love the technique and skills. Subscribed immediately

@@spankjuicer4976 Thanks bud! Appreciate it mate, hope youre well!

Muito obrigado, muito apreciado complemento!

Haha, I was shocked he’d been through the planer, then the thicknesser and the the bandsaw, but didn’t like expensive epoxy 🤷🏻‍♂️

Thank you Bob! Hope youre well! 🍻

@@HewAndAwe stay well too.

Thank you Mickel, Not so fussed about the sub number, well till I got to 1K that is. Watch time is more important - cheers for the complement! Hope youre well.

Obrigado pelo complemet. Não sabe o que quer dizer com breve?

Thank you 😊

شكرا لتكملة جميلة الخاص بك!

My earth name, generally mates call me Ben 😉 Thank you for the lovely compliment- much appreciated 😊 Hope you’re well and good! 🖖

I’m not the spider whisperer 😂 yeah was legit, couldn’t believe it, he/she went through all those tools, but only got the hump with the resin 🤷🏻‍♂️

Oh-man, thank you for that - nice to have your aboard! Hope youre well and safe!

Thank you Russel 😊 the spray paint was undercoat, you can use any spray paint, the idea is the same as using a guide coat on car body panel’s. So say you’ve gunned you high build primer you then can spray a colour over it and block the primer down flat - the guide coat shows you the low and high spots 👍 hope that makes sense?

Thank you 🍻🍻🍻

Thanks mate, was a fun build that just came together nicely just flying by the seat of my pants, love builds like that! Wish I’d made a set as I’ve been asked twice for a set.

@@HewAndAwe a set would be amazing!

I gotta be honest, I was cracking up when I found that! Just gold 😂

Interesting, I had to google Warwick bass guitars, but not sure what you mean still? 😆

@@HewAndAwe look up u tube, ( MAKING OF streamer 14 piece purple heart body...) Viewed from the bottom of the guitar. Google would throw up too much. Once you view this video you will find many more of their custom job videos appearing showing the CNC machining process. Just for inspiration and not copying. You are well equipped to make one for yourself but will have to look up things such as scale length, (even for fretless ones ) equally tempered scale and other diy videos such as yours. Many musicians look out for new bodies and necks. The neck is a complex job.

Thank you 😊

Thank you Ustinovich 🙏

You sir win the comment of the day 😁 That made me smile! I used the Suburr tooth carbide discs, I’ve had them for yonks and use a LOT, bar them loosing their colour they cut still like the day I bought them about 4 years ago, they’re really good and worth every penny! If you carve green lumber and the clog up just lightly take a blow torch to them and they clean up 👍

Thank you Adrian! Hope youre well!

Hahaha, oh it’s nice when someone is a cool about or makes a joke about it, mostly I get flack for them 😬 I started out with not so good tools some ten years ago, with no kids that I know of I’ve been able to afford such tools. If I use the Domino then the sarky comments roll in ☹️ Thanks for the sub, nice to have you aboard 😊 hope you’re well! 👍

Hew and Awe I know exactly what you mean, I still have a pantorouter to setup and use. Never used any Festool, but only hear good things, have a great day 👍

Thank you Victor, la pintura en aerosol estaba debajo de la capa, puede usar cualquier pintura en aerosol, la idea es la misma que usar una capa de guía en el panel de la carrocería del automóvil. Entonces, digamos que ha disparado su imprimación de alta construcción, luego puede rociar un color sobre ella y bloquear la imprimación hacia abajo: la capa de guía le muestra los puntos bajos y altos?

Hey bud, the primer is really a piss coat / a dust coat, you could just use a pencil but paint covers it all quickly, I doubt it goes much more than pencil - seems to take the same time to sand off by hand too. Ive never tired it on end grain mind. I dont watch much wood working on youtube more car stuff F1 and how to edit vids mainly - to be honest its a luxury when I do watch as i'm normally editing when Im at home.

Thank you 😊 I don’t have plans I made my version of what Izzy Swan made.

@@HewAndAwe Thanks, I will replay your video in slomo and copycat it from there...

Cheers Jay, seems to hold me at 15 stone, the base is about 40mm thick and a through tenon.

Thank you Michael, I used primer like you would use a guide coat on car body panels when you’re flattening the primer to show the low and high spots 👍

Thanks man 😊

About 7 days inc finishing.

I use these and have done for years, they really last!!! www.axminstertools.com/instantsearch/result?q=SABURR%20TOOTH%20ROUND%20FACE%20CARBIDE%20DISCS%20 you will need to find the ones with the holes in which make it easier to work to your line.

Thank you Osvaldo ☺️ it was to protect the wood, I used car primer, basically as a guide coat like you would when you’re blocking primer on a car panel - it shows me the low and high spots. If you sand in a criss-cross fashion like when blocking primer you’re left with a close to perfect flat area - hope that makes sense?

I’m trying to work this out fella?

Hmmm, I could swear I replied to your comment Chris! Funny though I'm getting a bit roasted for that part of the film...

@@HewAndAwe Wow, some people are so sensitive!

Chris Franklyn some went as far to say it ruined the film 🤦🏻‍♂️

Thank you Claus, what a lovely complement 😊 The disks are made by Suburr tooth round face carbide discs, I prefer the ones with the holes in so I can see my lines I’m working too when the disc is spinning - they’re not cheap, but they will last you a life time, I’ve had mine 3+ years and they still cut just like new, I use them a lot! If I can help any more just shout? 👍

This brand - I prefer the ones with the holes so I can see my line better. www.axminstertools.com/saburr-tooth-carbide-discs-100mm-4-ax931328

I don’t know know what woodprix is mate, what bit of info are you after?

@@HewAndAwe My adventure with woodworking started with Woodprix. On Woodprix website you will find the plans. Good and very accurate designs ant much more

Remington Mcneese about the only time I work with plans/drawings is when a designer sends me them to make 👍

@@HewAndAwe Awesome to hear that 👍 Best wishes !

Purely for astatic reasons, the base is plenty thick enough to take it, also there’s only one way to sit on it so really only one foot rest needed 👍

Really, Chav FM? Chav has a different meaning in the UK.

@@HewAndAwe Yes, mate. The very meaning of that word. Гоп ( sounds "Gop") in russian means a way of life that is opposite to the social order, specially among uneducated, unskilled persons. And "Гопник" ("Gopnic") - is an individual with such a lifestile. Gop is also a synonym for Gopnic as a short form. Btw, amazing and very fine work. Thx for sharing. Greetings from Russia !

More than I care to remember, I’ll never make the money for the time I spend to be honest. I take to long cause I over think etc. I think I’m selling that stool for 250 quid all this time and no one has bought it 😏 I hope you had a lovely Christmas! 🍻😊🍻

@@HewAndAwe Same to you as well! Keep up the awesome work!!

Thanks Jack, not sure why or where you are in the world but these are the discs I use www.classichandtools.com/acatalog/Saburr-Tooth-Carving-Wheels.html Expensive but they ve been abused for over 5 years now, bar losing their colour they still cut just fine!!! Hope this helps dude! Kind regards, Ben.

Was a while ago fella, about 50mm ish.

Pretty much just angled the drill press table at a 5 degree angle, with a piece of ply with V shaped fence to hold it in place so I only had to spin the work piece for the next hole, also I had to drill with the work piece bottom up to get the splay - hope that makes sense? If not I’ll some how show you.

KZfaq có phụ đề cho điều đó

No, you’re wrong. The wedges should always be at 90 degrees to the grain direction to say in the case of the stile piece. If the wedges were running in line with the stile grain they would drive apart the tenon and risk splitting the stile. I appreciate that a stool seat isn't exactly a stile piece, but the same principle applies, the wedge is at 90 degrees to the direction of grain on the seat, so no matter how hard the wedge is pounded in (or how much the seat subsequently shrinks across the grain) it's not going to split the seat.

@@HewAndAwe I will take your word for it. It sounds like a reasonable reason. Thank you for your replies. What is the brand name of the glue?

Michael Joyce Please don’t, most of the reason I do this is to inspire people - I learned the hard way with that joint with a leg splitting, that could of been avoided by drilling a hole at the base of the gap of the void for the wedge, but it made me think what about seasonal wood movement given this is more of a mechanical joint like dovetails are and came about cause back in those days there was no glue, till they thought of melting horses that is 😳 Not sure which glue I used, I have many different types, different open times etc. Depends on the temp in my workshop, do I need to work on it pretty soon etc etc. I have them all, titebond 2/3 I try to stay away from cause it stains and a bitch to sand out say if you’re gonna stain the piece, PU is mostly what I use in winter, ready to work the piece in 5, 30 or 45 mins, very good strong glue if you know how to use it - generally PVA though if time permitting, hope that helps 👍

@@HewAndAwe I understand, I had the same problem. I just excepted it as, what is and nothing I can do about it. But keep real heavy people off of it.

Thanks Marty 😊 No that was primer, I use it like a guide coat on car panels when blocking back the primer to show me the low and high spots to get to flat, if that makes sense? I’ve hand absolute rubbish tools back in the day, upgraded to dewalt and so on then found the Festool system saved me time/money and my lungs. I can spray very well, I just don’t feel it comes close to the durability of Osmo polyX hard wax oil, pretty much my go-to finish. Plus the waste involved spraying is horrendous, but I have HVLP guns, really only used for my ride-and-joy and know more about spraying two-pak paint than finish for furniture to be honest.

Thank you Chris ☺️ I was being very careful, cause of the ramped up vid it looks like I wasn’t. Well spotted! I actually cut the slots the wrong way to the grain direction so made a feature out of it and flipped the legs to solve the prob 😆

Cheers bro!

@@HewAndAwe 😊✊

I really cant remember, somewhere between 0-5, it really doesn't matter what angle you choose just dont go above 10 degrees.

Are all three holes the same angle?

Yes. You saw the thickness of the seat and legs right.

@@HewAndAwe not having a go btw. It was a genuine question. I've made little stumpy (and crude) stools like that, but I hadn't seen a breakfast bar type scale stool done like that before. I wondered why only put one crossbar In but while typing this I answered my own question Foot rest

@@fridgeways2300 I’m sorry mate, it’s so hard to tell peoples time here and I get a lot of dick heads who just want to bring you down.. my apologies 👍

I cant find the exact one, bought it years ago, but here's one similar www.amazon.co.uk/Staedtler-550-02-Extension-Universal/dp/B000WH0XBC/ref=sr_1_44?crid=2D77Q16KPL78Z&dchild=1&keywords=compass+set&qid=1610797362&sprefix=compass%2Caps%2C161&sr=8-44

Was a while ago, was either 3 or 5 degrees.

@@HewAndAwe I've been looking on the internet and I've found 12 to 14 degrees for the leg angle am I way off?

You can have anything between 0-14. I’ll double check what angle I used later when I get to the workshop.

To my suprise too, had already been through the planer and thicknesser and bandsaw - I guess he just didnt like the colour lol

Yeah I know 😂😂😂 we call them something else here, “chavs”

Thank you Andre, appreciate it brother.

I first hit it with a 50/50 mix of white spirit and danish oil, then two coats of Osmo polyx.

Really depends on the grade and species of oak, most oak I use has lots of defects which I like at about £45 plus vat for a cubic foot.

@@HewAndAwe thanks for answer

Yes the exact one, funnily enough just moved it to the show room yesterday.

@@HewAndAwe please provide me the link for online booking

Sree hiya, I was in the process of setting up a website then this virus happened, if you look me up on Facebook facebook.com/hewandawe and message me there we can sort something out 👍

@@HewAndAwe wonderful

I’m sorry I only have the one.

Hi Nate, I don't but I'll make you one.

Tell a lie, I’d forgotten I used this jig in the film (table saw lathe) kzfaq.info/get/bejne/eMiVjKlosN3Wfmw.html 👍 I’ll still do a vid for you on the others.

Gracias por el cumplido!

Suas ferramentas são imprecionantes tudo muito organizado parabéns

@@jeronimopaula4079 Obrigado pelo complemento Jeronimo!

Hi Raul, thank you for your interest - for four would be 1K UK pounds inc materials.

@@HewAndAwe I'm building an outdoor kitchen. Do you think they will hold up to high moisture

Raul Gonzalez I’d have to make them out of seasoned wood for outdoors, but what ever seasoned or kiln dried I wouldn’t leave either out in the elements, the colour will change etc - furniture like the above and all the work that goes into them it would be a shame to let the weather destroy them. Better to get them out for use and put them away when done to be honest.

400mm by 40mm.

@@HewAndAwe спасибо

Cheers buddy! Hope you had a nice weekend!

Hahahahaha! Same, this cracked me up! Cheers bud, hope youre well!

Try asking a more open-ended question.

منو از چی نجات بده؟

@@HewAndAwe در فیلمت از نماد شیطان پرستی استفاده کردی از خدا خواستم نجاتت بده هنرت بسیار زیبا بود

@@HewAndAwe من همه انسان هارو دوست دارم شمارم دوست دارم

@@hoseeyndabighi9751 فقط ارجاع به فیلم گنج ملی با قفس نیکلاس بود ، به معنای هیچ چیز واقعاً نیست - و من متدین نیستم بنابراین هیچ چیزی برای من معنی ندارد ، از شما ممنونم که مکمل آن هستم ، من آن را می دانم!

@@HewAndAwe زنده باشی مردهنرمند بهترین هارو آرزو مندم برات من ۶۷ ساله هستم در ایران و کرج هشت گرد زندگی میکنم

Wra apenas um companheiro de brincadeira, relaxe.

😂 was just a gag man, don’t take it so seriously 😂

As so is your comment.

Cheers dude! 🍻🍻🍻