Crafting His and Hers Pool Cues from Scratch (No Talking, just Woodworking and Mouth Breathing)

Рет қаралды 116,597

Жыл бұрын

This will be a shocker for everyone, but today, we're making pool cues. I know, no one saw that coming.
I consider myself incredibly fortunate to have met such awesome people to build cues for. Each person has been a joy to work with. Jerod and Wendy are no exception, and I appreciate them for entrusting me with their creative challenge.
I recommend Daisy for carbon fiber shaft tubes: www.carbonfibercue.com/

Пікірлер: 134

@Studiotronics Жыл бұрын

Heya guys, I’m getting lots of requests for purchasing these sleds. I don’t have plans to sell them. Combining two funky angles into a single cut appears to make table saws angry, and they feel a little risky to me. And they’re non adjustable, made specifically for the point geometry I like when making full splices. (Your points will be different and not match)

@veronicahawthorne3452 Ай бұрын

You are a master. These cues are beautiful, as with everything you make. ❤️

@tonyde9ball Жыл бұрын

You're work is exceptional. Thank you for sharing

@sidneyriggs9764 Жыл бұрын

Absolutely amazing beautiful job.

@johnallen9583 Жыл бұрын

You totally rock. Amazing.

@tldamian Жыл бұрын

I know the time and effort it takes to film and edit, and the humility it takes to show when things go wrong. Thank you for all that you do, both in cue making and making content for us to enjoy. You're a legend and I can't wait to run a rack with one of your cues someday.

@alvinalbopera9327 Жыл бұрын

Nice work as always. Very detailed.👍🏻👍🏻👍🏻

@tonylayne2492 Жыл бұрын

Incredible!!! Very well done!!

@lukepbriggs6225 Жыл бұрын

Stunning as always 😮

@MASI_forging Жыл бұрын

Nice work as always.👏👏

@MrYogohogo Жыл бұрын

wonderful, thanks for posting

@ronalddiaz4286 Жыл бұрын

Awesome as always!

@gkvogt Жыл бұрын

Nice looking cues. I wish you the best.

@gman5051 Жыл бұрын

Great to see you back at your craft ! I’m stoked to Watch the video tomorrow . Was almost asleep …thanks for the video !

@2101hoffman Жыл бұрын

OMG, beautiful work brother.

@williambarcal9303 Жыл бұрын

Man those are so good looking!!!

@2112kustoms. Жыл бұрын

I have watched every video. But sometimes I click the video hit like and then actually watch it later... always a pleasure.

@sebastianlinardi 5 ай бұрын

Excelente maquinaria! Excelente creatividad! Excelente resultado! 100% profesional. Los tacos son hermosos! Voy a ver otros vídeos de tu canal. Hasta la próxima.

@tjsr.5544 Жыл бұрын

Great work on that pair, Eddie!

@YahyaAsvihany 3 ай бұрын

Very beautiful color combination.. 🔥 Black - red, red - black

@dilanelpupi5410 Жыл бұрын

beautiful work friend

@jacobthellamer 7 ай бұрын

So cool, now I want to make pool cues! Maybe when I get bored of luthiery. I love your craftsmanship and you definitely have a very good eye for aesthetics.

@aliawan5490 Жыл бұрын

That redwood is absolutely gorgeous, good decision

@bertraminc9412 6 ай бұрын

Wonderful!

@user-gx2tw1oo3p Жыл бұрын

Wow! Such a craft! 🙌🙌 I wish I could own one of your cues someday.

@friendsmakingmusic1751 Жыл бұрын

great work!

@Rakmup Жыл бұрын

awesome work....especially for a relative beginner! Gives me hope. I like how you keep trying new methods and the jigs! And I just bought the same paper press! LOL

@nicocojammmqwx9226 5 ай бұрын

I love you work so much and how dedicated you. I hope one day I could get to see you work God bless

@densanaktmseberataan5391 6 ай бұрын

I like your crafted design cues

@midian879 Жыл бұрын

I hope one day I’ll have the means of getting a cue from you. Beautiful work

@matthewphillips1728 Жыл бұрын

Love them as always. Would love too be able too get Ebony like that in Australia.

@ggrllc2789 Жыл бұрын

Amazing

@hjprojec4752 Жыл бұрын

Waaw 🥰😍 very beautiful cui

@PaulCourville Жыл бұрын

Now that I know you’re a Firefly fan…I’ve subscribed and will like everything you post!!!!!🎉

@balanmihaigeorge Жыл бұрын

Hands down, the best cue maker in the world!

@megc.4907 8 ай бұрын

I'm a average pool player and i'm watching from the Philippines and i love how you make those awsome cues. every night before i go to bed i always watching how you make cues and im dreaming how it feels to owned one of those finest cues 😍

@shotmkr2 Жыл бұрын

I look every day for your videos. It'll be great when you make it big, higher an editor and we get 40 min long versions! Awesome work!

@abdulrahmanfadel8573 Жыл бұрын

*hire

@carlosmoreno102243 8 ай бұрын

maravilhoso parabéns ..

@Trung778 Жыл бұрын

It's great when you make a 3c tree as a gift

@Stellarffxi Жыл бұрын

Wow thats clever... Didnt even think points were possible on a table saw...

@thanhtam4554 Жыл бұрын

Wow, thanks for wonderful sharing. Your video make me think that I can make cue too. I will start making easy cue first. Where do you buy the exotic wood blanks, and rings etc. Thanks.

@user-lb8do4ew6k Жыл бұрын

Great work. May I suggest looking into slitting saws & an indexing head/ offset tailstock for cutting those points? (Or maybe one of those toolpost mounted dremels)?That tablesaw jig works, but slitting saws have a much smaller kerf (less waste), are more precise & won't kick your work across the room & shatter it.

@Studiotronics Жыл бұрын

Thanks for this! I wonder if slitting saws somehow reduce the risk of kickback. I’m unsure. My current blade is a thin kerf although probably not as thin as a slitting. I was actually thinking about going back to the original thickness blade as the riving knife is kneecapped with thinner kerfs. I’ll research slitting saws today.

@zacktran3388 Жыл бұрын

Really amazing craftmanship and artistic! Thanks for sharing the video. Is there any chance to get a custom cue from you? Much respect!

@dunguyenvan 3 ай бұрын

👍👍👍

@timellis9293 5 ай бұрын

Just found your channel. Amazing work. Do you think your jigs would be less angry with a router table vs the table saw? Can't wait to see more.

@Cuenique211 Жыл бұрын

Hiya EO, I love your work and vid's, especially your colourcompositions, this is one of the nicest enjoyable processes of cue making. Could I order a set of those blue jigs from you? Have a great day ;-)

@Mr.Beefy82 Жыл бұрын

Absolutely beautiful how do I go about getting one of your cues

@user-rx6ux4rr6g 11 ай бұрын

Mình thích xem bạn làm cơ bia

@MohamedGamal-rp1nc Жыл бұрын

Hello, it's a great job. I want to get a lot of it❤❤

@user-bb6zl4vf6l 11 ай бұрын

당신이 계신곳으로 한번 가보고 싶습니다 너무 대단하시고 좋은작품을 만드시는것에 감사드립니다

@JTan74 Жыл бұрын

Thumbs up immediately for quoting Wash's last words.

@davidreid8835 Жыл бұрын

I enjoyed this video a lot as I do all your videos. I was sad when it ended but I’ll watch it a few times. Just wondering if you are familiar with movies made by Studio Ghibli, the Japanese anime film-maker renown worldwide ? A lot of creative and artistic people love their movies for their art and creativity and you are certainly one such person. I’m an old guy but have been a diehard fan for years. If you need a recommendation try Castle in the Sky or Spirited Away.

@RS-93551 Жыл бұрын

@jaimemolina1777 Жыл бұрын

My brother was a writer/producer on Firefly!

@aarong6430 3 ай бұрын

Your cues are absolutely beautiful and want one to have as my shooter. Do you have a website or something I might be able to put in an order to have a cue built?

@ODDwayne1 8 ай бұрын

If you're using a Freud blade, it's thin kerf and is deflecting off the hardwoods. Especially when ripping on such a shallow angle. Might see if a thicker blade helps, AND try cutting with the stock turned the other way. Just cut straight into the end grain. Cool work. Good luck. 👍

@Studiotronics 2 ай бұрын

You made this post 5 months ago and I never followed up. You were 100% right about the thin kerf blade. I replaced it with a regular blade and it eliminated the kick back. You're a legend.

@ramonteran4704 8 ай бұрын

Desde Venezuela

@peteway9377 Жыл бұрын

Use the cut out spikes as cores for other point/veneer assemblies. I'm sure it was good wood from the forearms, and will make nice points into other contrasting forearms.

@peteway9377 Жыл бұрын

stay shiny...

@juliorb6046 9 ай бұрын

Que lindo trabajo muy lindos que precio tienen como buscar tus productos.

@MiguelSilva-yh6ep 6 ай бұрын

Excelente trabajo, cómo podría adquirir uno, tendrás alguna página?

@jimmy_betmore Жыл бұрын

I'm really not a fan of the "up and down" splice look. But I am a fan of of execution and those cues look fantastic!

@RedemptioncuesDNB Жыл бұрын

I seen your first video on cues an been watching since the start. You were overly excited 😂 now it seems from my experience overly stressful lol. Im been making cues also an thats how it feels for me. But you have leveled up 10x . 75% of what i know came from your videos. Im getting into making fullsplice an half splices cues. An wondering if you will share the specs of your angle jig. I only have a tablesaw atm an shopping for a bandsaw.

@Studiotronics Жыл бұрын

The specs of the jig will be different depending on what kind of geometry you like (long points, short points, width of your returns, etc). By making more and more cues and seeing how I’m doing the cuts in these videos, I’m confident you can reverse engineer it. Sit down with pencil and paper and decide how you personally like full splices to look. How deep should the points go? Past the handle? Or short and old school? Thick returns? Razor thin? How much empty space between top of the points and joint? Once you find that out, make some tester prongs for the body. Then start taking measurements with your caliper. What shape is needed to fit the negative of this prong I just made? Once you do this, you’ll have your dimensions. CAD it up. You can make it on a table saw or cnc or wherever. I 3d printed mine.

@makale3889 Жыл бұрын

would never use it, a total work of art, would have it mounted and put in pride of place !!!

@breakshot7451 Жыл бұрын

you have to. that s his purpose. but i don t get cars behind glass , either. the fun really is using it.;))

@manuelacurero8243 Жыл бұрын

Es hermoso. que precio tiene uno de esos

@erwingvela 11 ай бұрын

Hi there how many tapes of wood can you use on a pool cue??

@stanleyhutsell2879 Жыл бұрын

Where can I buy one of these

@jayrubio6673 11 ай бұрын

Man, you build some fantastic cues. When I get right, I may have to contact you. Great workmanship. I really enjoy these build videos.

@robertb9424 9 ай бұрын

Where I can buy one of this?

@Stellarffxi Жыл бұрын

Burls that long must cost a small fortune too...

@carlostames5493 11 ай бұрын

I always wonder, how much are your cues ?

@rodrigodiaz1535 Жыл бұрын

How,where, can i get my very own ?

@rj6662013 Жыл бұрын

Amazing work, my friend. Can I suggest a cue video build?

@Studiotronics Жыл бұрын

Sure!

@jessicaculp3829 11 ай бұрын

How do I purchase one of your cues?

@erwingvela Жыл бұрын

How much is the cost for a cue like this one??

@rollingdrummer8455 Жыл бұрын

How can I buy one of your cues?!?!

@jorgetoledano5501 Жыл бұрын

Donde se pueden comprar?

@inimoooo3216 Жыл бұрын

How can i get your hand made cue?

@nickcordero8484 7 ай бұрын

How much you charge to make a nice cue with a 12mm cue tip, 58 inches, 20 oz. Two pieces and 8" extension.

@hjprojec4752 Жыл бұрын

is there anything for sale?

@user-xi4le3hv3g 12 күн бұрын

一本欲しいな❤

@gtbonfleur6593 Жыл бұрын

You build some great cue .I hope to get to your level of building success. Hope you are welling to help me get there.

@Studiotronics Жыл бұрын

Happy to help, any questions and I’ll be happy to attempt to answer. Do keep in mind though that I still consider myself a beginner but I can do my best to help.

@Corcor_194 11 ай бұрын

Still using Solarez for finish or...? I recently abandoned it, went back to epoxy and CA

@LE-6920 Жыл бұрын

Ebony and redheart... It's might be weights such a hammer... Is it not alot for playing cue?

@Studiotronics Жыл бұрын

The ebony is partially cored and the redheart is fully cored. Buyers will usually specify weight, and it’s pretty easy to land right on it.

@RickyLipe 2 ай бұрын

How can I contact you about building me a custom cue? I've been going down a rabbit hole watching all of your videos and I'm awestruck by your work.

@erwingvela 11 ай бұрын

How much can it cost??

@eatenkate Жыл бұрын

"my new jigs for cutting forearms on the table saw" will never not sound Very Worrying

@ThanhLam-vd6cy 10 ай бұрын

Mong ước lớn nhất là được sở hữu nó dù chỉ 1 lần

@sunris3919 Жыл бұрын

How can i buy your products??

@anthonydavis4581 Жыл бұрын

How do I order one??

@hondahathanhphat Жыл бұрын

TÔI THEO DÕI BẠN ĐÃ RẤT LÂU , TÔI Ở CÁCH BẠN NHIỀU NGÀN KM , TÔI RẤT THÍCH NHỮNG SẢN PHẨM BẠN LÀM RA , ĐÓ PHẢI GỌI LÀ NHỮNG TÁC PHẨM NGHỆ THUẬT THẬT TUYỆT VỜI !

@alfonsosantamaria3782 Жыл бұрын

A cómo los ase en plata colombiana y dónde sé puedes comunicarte gracias

@user-oj7hb3pg6f Жыл бұрын

So how does someone order a cue from you? Do you have a website with ordering info? What is your company name or website address?

@user-xj8nl9nj7i Жыл бұрын

얼마에 구입가능한가요?

@gamingmfc6070 Жыл бұрын

I've been following you for a long time. hope you can reply and help me to make one. I really like what you do. I live in Vietnam

@MultiBowhunter69 Жыл бұрын

How much?

@user-tu9kt8xl7f Жыл бұрын

큐가예쁘네요.. 직거래하면 좀쌀려나?

@user-pg5wi5ef5m 24 күн бұрын

請問工作室在哪呢

@YaworskiPoolPractice Жыл бұрын

Dude I am like the 1st person to watch !!! Do I win a prize ? I think I should.

@Studiotronics Жыл бұрын

I think you were! High fives. What should I offer as prizes?

@YaworskiPoolPractice Жыл бұрын

I don't know man. I am a cnc programmer with a deeply rooted pool and manufacturing obsession. I love your vids. You should make studiotronic shirts with pictures of your cat on them.

@Studiotronics Жыл бұрын

That’s a great idea. In the meantime I thought I’d have chatgpt draw you an ascii pool cue. This is the result: eocues.com/public/lol.png

@mhf1979 Жыл бұрын

Bro as always your build being so amazing. Keep them coming 💪💪💪

@Ryan_Nalty Жыл бұрын

@@Studiotronics 😂😂😂😂😂😂 exactly what I hoped it would be

@gtbonfleur6593 Жыл бұрын

Can you help me sat up the jig for cutting full splice butts.please. I would appreciate it very much. If you can help. Do it on a table saw. Thancks

@Studiotronics Жыл бұрын

I just replied to another user on this same video- go find it and check it out for my recommendations on getting started with these jigs.

@gamingmfc6070 Жыл бұрын

Can you help me make one?