No video
Craftmas Season 4 Episode 3: DTF Sublimation Hack
Рет қаралды 4,134
Жыл бұрын99% of the vinyl I use on my channel is Specialty Materials Brands I have tried many kinds over the years, and they are my absolute favorite. The quality is top-notch, I have a video where I wash a shirt 50 times, and the vinyl still looks brand new. • Thermoflex vs. Siser: ... They have the most extensive range of products and colors around ( there are over 90 colors in the ThermoFlex Plus and GlitterFlex Ultra lines alone). They also offer free product samples on their website, which you don’t see anymore. Trust me, request a sample because if you try it, you will know why I love it.
Request a Free Sample:
specialtymater...
Specialty Materials :
specialtymater...
* I DO GET FREE PRODUCTS TO TEST SPECIALTY MATERIALS TO TEST, BUT I STILL PURCHASE 95% OF MY VINYL. I WILL ALWAYS TELL YOU WHAT YOU GET FOR FREE. *
Artwork created by me (unless otherwise noted) is available on my Patreon page:
/ betsygotcher
Affiliate Links (I Earn a Small Commission if You Use Them) :
My Amazon Store (Has most of the things I use unless I state otherwise) :
www.amazon.com...
Vinyl, Heat Press, and Cutters :
Non-Affiliated Links:
HeatTransferVinyl.com (carries all Specialty Materials Products):
www.heattransf...
Affiliate Links (I Earn a Small Commission if You Use Them) :
Heat Press Nation :
shrsl.com/3t4xq
15x15 Heat Presses:
shrsl.com/3t4up
16x20 Heat Presses:
shrsl.com/3t4vb
shareasale.com...
Cricut:
cricut.pxf.io/...
Sublimation Blanks and Supplies:
Links (I Earn a Small Commission if You Use Them) :
Conde: Use Code: CPN-CCV22 $5 off $50 purchase:
shrsl.com/3mxhs
Koala Sublimation Paper: Use Code: Betsy15 to Save 15%
shrsl.com/3mxhk
Design Software and Commercial Use Fonts and Graphics:
Affiliate Links (I Earn a Small Commission if You Use Them) :
Creative Fabrica:
www.creativefa...
Artwork created by me (unless otherwise noted) is available on my Patreon page:
/ betsygotcher
Screen Printing:
Affiliate Links (I Earn a Small Commission if You Use Them) :
Ikonart Smart Screen Stencil: Use Code: CuttinCorners for 15% off
ikonartstencil...
Find me on social media:
Instagram: / cuttincornersvinyl
Facebook: cuttincorners
Cuttin Corners Group on Facebook: / cuttincorners
Betsy's Bees (a fun place to hang out and share your crafts): / 260612806191309
I can't thank y'all enough for sticking by me through hurricanes and health issues, and everything in between. It means the world to me all the love and support that I have received throughout the years.
XOXO,
Betsy
Specialty Materials, #cuttincornersvinyl, Heat press Nation, Cuttin Corners Vinyl, heat press nation 16x20 signature series
@yamationdtf3615 Жыл бұрын
🥰Amazing!! Thank you for your DTF SUBLIMATION HACK testing. The color of the pattern looks great! Love it!!!!!!
@TwoSistersCreations Жыл бұрын
Thank you for trying this! I would love to see you try the black DTF transfer powder and the DTF film on a darker colored cotton shirt. I have not found a tutorial on this hack using the black powder on dark colored shirts. I'm so happy to see Craftsmas again!! Love you, Becky!!!
@CuttinCornersVinyl Жыл бұрын
This works on both light and dark shirts. I just choose this color because it looked best with the design
@CuttinCornersVinyl Жыл бұрын
The black would best if you were doing single color dark design only the white powder gives it some color for the background
@eleanaemerson8409 Жыл бұрын
Thank you❣️ I've been trying to find one myself. With white lettering would be a plus🙏❣️🙏
@maryjanewill3056 Жыл бұрын
Cool Betsy, have watch this again!
@floralong4736 Жыл бұрын
That is gorgeous U always have beautiful designs. I love the jack bc it gives so many options.
@nadinelopes4789 Жыл бұрын
That shirt is beautiful and you are looking beautiful.
@lisawhite9725 Жыл бұрын
Thank you for this! I tried this hack only once so far. I did this process very similar to what you did. I did heat or bake the transfer under my platten until the powder crystalized. Let it cool and then transferred it on my T-shirt.
@CuttinCornersVinyl Жыл бұрын
How did your results come out
@lisawhite9725 Жыл бұрын
@@CuttinCornersVinyl It turned out great…I was so surprised. I did however give it as a gift, so I’m unaware about how it washed. I’m planning on doing it again. I’ll keep this one and wash it. Yours looks amazing. I’m so glad you did this tutorial.
@lisawhite9725 Жыл бұрын
Also, I used my converted epson printer. Do you have a link to where you got the large DTF transfer film? Or where did you find that. I used a 8.5x11 sheet but would like to use the larger size.
@CuttinCornersVinyl Жыл бұрын
@@lisawhite9725 it’s linked in my Amazon Store Craftmas list but this is the one I used amzn.to/3VaqPT8
@lisawhite9725 Жыл бұрын
@@CuttinCornersVinyl thank You!
@marymcsherry7432 Жыл бұрын
That shirt is gorgeous 💜 I’m gonna have to check out those sublimation printers
@CuttinCornersVinyl Жыл бұрын
💜💜💜
@reneebanbury7066 Жыл бұрын
The shirt is so pretty! I wish I had the sublimation stuff … but I don’t! Interesting stuff though!
@susandrew160 Жыл бұрын
Beautiful artwork
@erikag2098 Жыл бұрын
Interesting, never done sublimation before
@cherryfischer3795 Жыл бұрын
That looks amazing!! So I see you taped it to a 13X19 sheet of paper, but you didn't show it printing in the printer. Did you cut the 13X19 paper down to match the 11X17?
@shantelwofford427 Жыл бұрын
that shirt is beautiful ❤❤❤❤❤
@CuttinCornersVinyl Жыл бұрын
Thank you
@shantelwofford427 Жыл бұрын
@@CuttinCornersVinyl welcome
@alohagirl61 Жыл бұрын
So beautiful!
@CuttinCornersVinyl Жыл бұрын
Thank you
@vee5194 Жыл бұрын
Looks amazing!
@CuttinCornersVinyl Жыл бұрын
Thank you
@ruthybarretta7955 Жыл бұрын
Do you need ventilation and does it feel hard on the shirt
@Peedee3030 Жыл бұрын
Did you 'cook' your powder down first or was it just flipped and set on the shirt
@joyweber4659 Жыл бұрын
Very pretty!
@CuttinCornersVinyl Жыл бұрын
Thank you
@lisabeven333 Жыл бұрын
This hack only works with white or very pale colors , the DTF printer has 2 whites which are needed for dark color shirts without the 2 white inks the colors will not show up , that is the reason nobody is posting videos of dark colors on this hack.
@kimnewbill2590 Жыл бұрын
Looks great
@CuttinCornersVinyl Жыл бұрын
Thanks
@bobslfcu773 Жыл бұрын
Have you tried to use dtf to sublimate on a cake box? Would that work or is there another way to sub a cardboard cake box? Thanx for the info.
@hotchilly1000 Жыл бұрын
Why do you want to sublimate it? You could print sticker sheets to accomplish the same effect (unless I am missing something of course :) )
@bobslfcu773 Жыл бұрын
@@hotchilly1000 Just a crazy idea.
@maxineneale Жыл бұрын
Evening from England ❤
@CuttinCornersVinyl Жыл бұрын
✨good evening
@mrsdizi1234 Жыл бұрын
Thank you for sharing I have a sawgrass, and what do you mean by HTV settings?
@maxineneale Жыл бұрын
Beautiful❣️
@CuttinCornersVinyl Жыл бұрын
Thank you
@kathyshorter8150 Жыл бұрын
That is so pretty. Did you have to heat the DTF? I saw a tutorial that after the powder is put on the design the film was put on the heat press to let it set before putting the design on the shirt. I didn't see any difference in the end result between yours and theirs.. Your's looks just as good. I am so glad you made this tutorial. I didn't want to go through all the hassle of heating and all that. I think I'm going to give it a try! You're the best.
@CuttinCornersVinyl Жыл бұрын
I didn’t heat before hand because I didn’t see a difference when I did. I actually feel like for me personally it lost some vibrancy when washing. When I heated it first
@kathyshorter8150 Жыл бұрын
@@CuttinCornersVinyl I'm glad you did a tutorial on this because that was the only reason I hadn't tried it. Thanks again.
@RBLACKPEARL7 Жыл бұрын
You look Great 👍 🙏
@CuttinCornersVinyl Жыл бұрын
Thank you
@vdubz243 Жыл бұрын
I am looking to try this Betsy. I believe there is an option for inkjet printing with dtv.
@CuttinCornersVinyl Жыл бұрын
I haven't seen it but I would be interested in knowing if it works
@vdubz243 Жыл бұрын
@@CuttinCornersVinyl I will let you know when I do.
@bobslfcu773 Жыл бұрын
Your shirt looks so nice. I have tried this with a different brand of powder and don't get consistent results, the image comes out grainy sometimes but never as good as yours. Do you know why it would cause it to be grainy? I cure it first for 8 minutes at 250 per the directions, and also peel it hot. If I wait for it to cool, it really sticks to the fabric,
@CuttinCornersVinyl Жыл бұрын
I’m not sure but when I tried heating it I didn’t think it came out as vibrant and I wasn’t a fan of the results.
@marycarlson1069 Жыл бұрын
Is dtf powder a way to put a sublimated design on a non polyester shirt? Since you still had to use sublimation ink?
@CuttinCornersVinyl Жыл бұрын
Yes ,this is a 100 % cotton shirt
@donnamay1150 Жыл бұрын
Is the film too thin to go through the printer by itself? The shirt looks beautiful.
@CuttinCornersVinyl Жыл бұрын
Yes, and it's also very slick. This is what work best for my printer .there might be a difference with other printers
@HeatherHunterJ Жыл бұрын
Have you used eco solvent ink? I saw some and wondered how many kinds there are and how many you’ve used?! 🎉❤
@CuttinCornersVinyl Жыл бұрын
I have. I have owned a couple of printers in the past
@maxineneale Жыл бұрын
Evening😎
@CuttinCornersVinyl Жыл бұрын
Good evening
أنا مسلم - I'm a Muslim
Рет қаралды 10 МЛН
Crafting with Delonda
Рет қаралды 567 М.
Cuttin Corners Vinyl
Рет қаралды 1,8 М.
Craftable Things
Рет қаралды 94 М.