CraftySniper presents - How to change a spring in the SRS

Рет қаралды 1,428

6 жыл бұрын

Hello and welcome to my latest airsoft action video. I create review videos as well as action videos where I follow the action and put you onto the front lines of an advancing team or defending a location with a group of airsofters.
I hope you enjoy the video.
Facebook Page -
/ craftysnipersairsoft
Website -
craftysnipersairsoftpage.weebl...
Instagram Page - craftysnipe...
If you have any questions or comments then please post them below or on my Facebook page.

Пікірлер: 16

@AdeyLRoberts 5 жыл бұрын

This video needs more views.. I have been hunting a video to see for certain what spring it takes.. great vid mate !

@CraftySniper 5 жыл бұрын

cheers Methias. I wish I could find a way of sharing my videos a bit more. Thanks for the kind words and stay tuned for further SRS videos

@AdeyLRoberts 5 жыл бұрын

@@CraftySniper Just ordered mine today :D

@CraftySniper 5 жыл бұрын

You will love it, it an amazing rifle

@AdeyLRoberts 5 жыл бұрын

@@CraftySniper Basic advice other than airseal hop and new spring?

@CraftySniper 5 жыл бұрын

@@AdeyLRoberts If your using heavy ammo say .48's then get the heavy piston. Always go for a good inner barrel. I have a Lombda and Edgi for my rifle. I have had good results using 100% air seal bucking, rhop patch and fow nub

@gold3n628 4 жыл бұрын

Great video !!!! Amazing explanation

@CraftySniper 4 жыл бұрын

cheers dude

@paultheowl6855 Жыл бұрын

I know its been a while since you posted this video, but i require some help and I can't find any help on the internet. Might aswell ask you... I wanted to adjust my butt plate length and i removed one of the plates and after i put everything in place, i racked the bolt few times and shot, it was working fine until i racked it again and the spring became somehow stuck in a compressed state and the bolt is moving with no rezistance, also it seems the trigger is stuck aswell, like it is on safe, but im on fire. I dont know what to do... I dont understand why this happened. Can you help me please? Or anyone?

@paultheowl6855 Жыл бұрын

I also tried to remove the buttplates and they wont come off

@CraftySniper Жыл бұрын

Hi dude. Have you worked on the trigger box? That sounds like a possible issue with the trigger sear. I have worked on my stock length by adding some more sections to it but I never found an issue. I would recommend a full strip down of the cylinder and power sections to see how they are sitting. After that I'd take a look at the trigger box at the sear.

@paultheowl6855 Жыл бұрын

@@CraftySniper thx. I managed to figure it out. Since it was second hand bought, the previous owner placed some cilinder made out of soda can inside the spring(so it minimizes the sound from vibration of spring) and that thing bent and caused the lock. I needed to strip down the whole gun. Glad I found the issue. Thx