NZG Liebherr LR 11000 Crawler Crane by Cranes Etc TV

Рет қаралды 49,588

Жыл бұрын

This is the Cranes Etc TV review of NZG Model's 1/50 scale model of the Liebherr LR 11000 Crawler Crane. The model number is 1029. The full review is on the Cranes Etc website: www.CranesEtc.co.uk.
Where to buy? Shops: www.cranesetc.co.uk/shoppingma....

Пікірлер: 58

@aghistorian763 Жыл бұрын

I have never had a crane model in my entire life (I'm into agricultural models), but honestly they are so incredible and I just have to get one one day. They look so impressive and how can't one be in awe looking at the real machines?

@cranedude07 Жыл бұрын

Another great review, I'm hesitant on getting one at the moment, I'm hoping a spacex version comes out, as it is the same configuration. Also hoping nzg fixes a couple small issues in the next batch, like very loose handrails, sagging cab. It is also very expensive for what you get, compared to the older lr1600. Yes it is taller but you get a whole lot more crane with the 1600 than with the 11000. Just my opinion. I think if the Derrick kit came with it, then the price would be about right.

@CranesEtcTV Жыл бұрын

The loose handrails only really come in to play when you start moving the model. For a fixed pose you can get a good result but yes, more consistent fixings would be better. The cab tilt on my model is OK. The price issue is interesting because the net weight of model in the box is 50% higher than the LR 1600. Add in a modest 20% inflation since the LR 1600 first came out, and the price actually seems sensible. But of course the LR 11000 is so much bigger so you do not get as many configurations out of the box for the weight.

@matthewdickson7838 Жыл бұрын

Very true im gping to leave it for a while too 👍

@essmene 11 ай бұрын

The pieces provided seem to follow a crawler Crane assembly on site. A company worker said for a Liebherr 13.000 they need 56 trucks for the main parts and outsource the weights to third parties.

@paisu24 Жыл бұрын

Wow, ive always wanted to see a big liebherr crane model!

@jmazoso Жыл бұрын

I just got mine, and I am happy with it, for the most part. The plastic retainer clips for the pins are pretty brittle, and the instructions could use some serious work.

@lastnamefirstname520 Жыл бұрын

A stunning model! Would be amazing with the superlift and ballast bogie as well as a luffer! Or even a boombooster. It has so much potential in it. But all that reeving is manic! It would send my brain on an ejection course out of my skull

@fadel_fdl_ Жыл бұрын

Pls When You Will Review The New Liebherr HS ?

@Niidforseat Жыл бұрын

I've waited for this review since BAUMA. Thank you very, very much! What do you actually do with all the models after you reviewed them?

@freddyrosenberg9288 Жыл бұрын

The models are immediately shredded to reduce the number of models made and increase the resale value for collectors.

@mingming9604 Жыл бұрын

i thought there were some quality problems with it initially?

@CranesEtcTV Жыл бұрын

I can only show the model I have, and I am happy with it.

@leongyokeloong5083 Жыл бұрын

It cannot beat the LR1600/2 which is cheaper, more configurations. LR11000 is a nice crane but is too simple for the price.

@dhewitt2514 Жыл бұрын

Pointless comparison

@chan27 Жыл бұрын

agree with you.. with that price, should have more configurations. At least this model should come with derrick so its more worth with a price..

@maurorivellino2522 11 ай бұрын

@@chan27 esatto, per quel prezzo avrebbero dovuto mettere anche il derrick

@Brian-gw6di Жыл бұрын

Well ill have to build mine minus one boom section my ceiling height is only 8' . I hope the Sarens version will not have the loose car body very important for a heavy crane for that to be sturdy. Love to see a video on how to move these large crane models so you don't damage or have your reeving become undone. Like where the best place to grab the model . My biggest fear with these large models is when you have to do home improvements like new flooring or new windows and you have to move these models to another room. I don't being to have to disassemble these once they are built.

@Brian-gw6di Жыл бұрын

I don't want to disassemble these once they are built. I don't know why I can't edit my comments anymore like before when you notice a typo?

@CranesEtcTV Жыл бұрын

I have lift and shifted this model and it is very heavy and therefore awkward. If you build it ceiling height then getting through doorways is another challenge. Booming down to far makes the model unstable so you end up tilting the whole model forwards and then the counterweights want to slide off. The key is to keep tension on the A-frame ropes at all times. So I lift the boom on the top edge (not from underneath) so the tension in the pendants is kept on.

@johnmodeste6616 Жыл бұрын

Looks great

@ceciliapena1 Жыл бұрын

Do you think that in the future there’ll be some extension sets available for that crane?

@ryanslut5607 Жыл бұрын

Cecilla pena i am not sure of what it max lift cap with length of boom sure not 85? Could there be a 100m twin boom kit? Short circle lift but heavy? Close to 2.4 meters is wow for a model ae 👍

@ceciliapena1 Жыл бұрын

Yeah, well, I think for the fans of the big crawler cranes then they’ll be pleased to think that they might be stronger than just a hope that they could be able to expand their model in the future if they buy the extension sets that you come out with, so let’s look forward to that and hope that comes out.

@mingming9604 Жыл бұрын

of course. NZG wants more $ from us. figure in another $500 for the derrick and luffing jibs and another $100 for each additional section ...lol..

@ceciliapena1 Жыл бұрын

Speaking of a derrick I hope the extension kit includes a derrick.

@bartsalaets9460 Жыл бұрын

NZG told me that there will be kits for this model. I hope it will be a derrick with V-frame and variotray.

@lazarlazarsgod8791 Жыл бұрын

where do you get models like this at?

@CranesEtcTV Жыл бұрын

See the video description for a link.

@catzzzz1450 Жыл бұрын

Probably in next few year we can see 11350 model,idk

@adamohara9573 Жыл бұрын

Why no SDB or SDWB configuration?

@CranesEtcTV Жыл бұрын

Maybe extension kits will offer different configurations.

@tepo2010 Жыл бұрын

Cool Model!

@goodgremlinmedia2757 11 ай бұрын

This is the crane used to assemble the second MegaBay at Starbase.

@gytulispet 11 ай бұрын

Will be video about Liebherr LR 13000 LEGO version?

@BeobachterofTruth 11 ай бұрын

It does not look very realistic.

@sparkynate91 Жыл бұрын

Any idea on when the LR13000 will come out? Or the XCMG XGC88000 crawler with arguably the largest amount of counterweight ever

@CranesEtcTV Жыл бұрын

Probably never. Many people already complain about the price of this model so a much bigger model would cost much more.

@mohammed_abusaleh Жыл бұрын

Where can I buy this please 😢

@CranesEtcTV Жыл бұрын

See the video description for a link.

@opmechgamer1431 Жыл бұрын

The model is taller then me!

@sandymacdonald2838 Жыл бұрын

Very cool,how much.

@pitifulsmile Жыл бұрын

Dos metro wow

@Kamo369 Жыл бұрын

wow

@apinkcranedude017liebherrb5 Жыл бұрын

Hamlet Trương 👷‍♂ NZG Liebherr LR 11000 Crawler Crane by Cranes Etc TV

@saskcanada94 3 ай бұрын

WHERE CAN I BUY THOSE CRANES

@hacktester69 2 ай бұрын

Read the video description

@helenaarnold4734 Жыл бұрын

The a frame looks like it’s upside down

@Andersonraposaaba Жыл бұрын

sees miniatura eu sogtel muito legal

@user-ky1dv1fw6k 9 ай бұрын

2014

@user-ky1dv1fw6k 3 ай бұрын

29피스

@user-ky1dv1fw6k 3 ай бұрын

영암 ~화성 (서산시)

@user-dz8mx3zy5l Ай бұрын

1030

@user-dz8mx3zy5l Ай бұрын

300/650

@blood852000 Жыл бұрын

Not a flexible model as in different configurations

@apinkcranedude017liebherrb5 Жыл бұрын

Ioi Toyota Wish 너무너무너무 liebherr ltm 1750 9 1 -pinky sejeong sarens cranes crawler Aaron Paul liebherr lr 11000 sarens CRANES MAX controlled.