Crank Position Sensor replacement P0335 (Nissan 350Z & Infiniti G35)

Crank Position Sensor replacement P0335 (Nissan 350Z & Infiniti G35) | AnthonyJ350

Рет қаралды 103,029

4 жыл бұрын

If your Nissan 350Z or Infiniti G35 won't start, randomly the engine shuts off and/ or you have the engine code P0335 it might be a good idea to replace the crankshaft position sensor.
In this video we show you the location and procedure to changing out the part.
Hitachi Part #: CPS0006
#CrankPositionSensor #P0335 #CheckEngine
Subscribe for more automative tips!: bit.ly/sub2anthonyJ350
Watch my most popular uploads!: bit.ly/anthonyJ350howto
Check out my Amazon storefront www.amazon.com/shop/anthonyj350
Website: gofasthavefun.ca
Instagram: / anthonyj350
Twitter: / anthonyj350
Facebook: / aj350
Shop: www.amazon.com/shop/anthonyj350
E-Mail: info@gofasthavefun.ca
T-Shirt: teespring.com/en-GB/AnthonyJ3...
Music available - www.jinglepunks.com & www.epidemicsound.com
Intro - "Heartbreaker'" - Gloria Tells
Outro - "I just can't change my Emotions" - Basixx
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Crank Position Sensor replacement P0335 (Nissan 350Z & Infiniti G35) | AnthonyJ350
• Crank Position Sensor ...
ANTHONYJ350
/ anthonyj350

Пікірлер: 180

@eduardoh4694 2 жыл бұрын

Bro you made this tutorial so good it took longer jacking up my car with a scissor jack than replacing the sensor itself 🤣🤣

@AnthonyJ350 2 жыл бұрын

I'm glad to hear the video helped you 🙂

@kuengyal23 9 ай бұрын

😅

@Nzchimeran 2 жыл бұрын

I just want to say thank you. I bought sensor for $30 and changeover took less than 30 minutes, cars like new. You saved me a truck load of cash....where do I send the beers? 😎

@AnthonyJ350 2 жыл бұрын

Glad the video helped you! If you want to help, help spread the word and we can push to 100K subscribers!

@dope1808 3 жыл бұрын

hey you' still have your z, alright! you really took good care of it.

@AnthonyJ350 3 жыл бұрын

Yup still have it, it's been driving good

@roned9189 4 жыл бұрын

Super info as always now I know how to do it I need too thanks Ron uk 🇬🇧🇨🇦🇨🇦🇬🇧👍

@AnthonyJ350 4 жыл бұрын

Thanks for watching!

@robot1847 2 жыл бұрын

Thanks man perfect for the job I’m doing right now otherwise I was gonna have to take her to the shop but you got me right

@AnthonyJ350 2 жыл бұрын

Glad to hear the video helped!

@iiStorm Жыл бұрын

Just got my first Z and it stalls when it gets warm and you try to start it again and sometimes at red lights when pushing the clutch needed to replace it and thanks for telling me how man!

@AnthonyJ350 Жыл бұрын

You're welcome 🙂

@patrickkillilea5225 2 жыл бұрын

Cool. Thanks man!

@AnthonyJ350 2 жыл бұрын

You're welcome!

@larrycroft470 2 жыл бұрын

Anthony i always seem to find interesting and helpful videos for my 08 G35 on your channel!! Thank you again. !! Your friend Larry C

@AnthonyJ350 2 жыл бұрын

Thanks again for watching!

@jorgem.4382 Жыл бұрын

lucky u got the hr

@joelchavez9985 4 ай бұрын

Hey man my 06 350z is having this problem at the moment only thing I didn’t get from the video is how to do the ecu reset you talked about at the end ? Very helpful video !

@AnthonyJ350 4 ай бұрын

This video should help kzfaq.info/get/bejne/a9qBoJVpsJmWg4U.htmlsi=S5DUxDWrF-Y2v3rJ

@joelchavez9985 4 ай бұрын

appreciate it !

@AnthonyJ350 4 ай бұрын

@@joelchavez9985 You're welcome!

@MrSnakedoctor85 4 жыл бұрын

Will definitely give it a try my next oil change. Is the crank sensor on the transmission?

@AnthonyJ350 4 жыл бұрын

It's on the bell housing

@vicburt6001 2 жыл бұрын

@rickeyb8812 Жыл бұрын

Do you reccomend changing the other 2 position sensors too? (CSPS) While doing the crankshaft position sensor?

@AnthonyJ350 Жыл бұрын

I would, just get them all out the way and do an ECU relearn. I have videos for all of it.

@robertharvin8520 3 жыл бұрын

so i replaced my crankshaft sensor on my g35 coupe , but it tends to pop back up the code maybe a week or 2 later , and i replaced it a the oem do you have any answered

@AnthonyJ350 3 жыл бұрын

Did you replace the camshaft sensors as well?

@josez3326 3 жыл бұрын

A shop changed mine but they used a aftermarket one. And now if it’s plugged in it stalls. Should I get a oem one?

@AnthonyJ350 3 жыл бұрын

Try this first kzfaq.info/get/bejne/a9qBoJVpsJmWg4U.html

@slowguy4046 Жыл бұрын

Would Crc qd electric cleaner work to clean the connector and is it safe to spray inside the connector

@AnthonyJ350 Жыл бұрын

You can, just make sure you dry it out before plugging it back in. You can put dielectric grease in the plug after you're done cleaning it.

@RidenwBiden Жыл бұрын

Thank you for this video! I remember having my g35 stall when driving it was a sensor but it was on top of my engine. Now I’m have a starting problem and got code PO335 which appears to be a crankshaft sensor. I heard you mention the other one. So there are two and this one would be under the engine?

@AnthonyJ350 Жыл бұрын

Thanks for watching! Just one sensor that's shown in the video. Camshaft has multiple sensors.

@RidenwBiden Жыл бұрын

Got it thank you!

@taylorkuroda7933 Жыл бұрын

the one on top is a camshaft position sensor should have like a 45 degree angle and then the straight shooter at the bottom is a crankshaft position sensor

@lamontehood1163 10 ай бұрын

I have a 07 infiniti g35 sedan was it hard to get to the crank position sensor under the vehicle 🤔

@aleon117 Ай бұрын

Would a big exhaust leak right after the y pipe cause an issue with the crankshaft sensor? My car cranks but engine wont turn on. Fuel pump seems to be working I can smell fuel burning. Checked the fuses and relays they are working. Gonna check the camshaft sensors and crankshaft position sensor hopefully it’s the crank shaft sensor.

@AnthonyJ350 Ай бұрын

I don't think so. If you replace the sensor go O.E.

@aleon117 Ай бұрын

@@AnthonyJ350 just ordered the hitachi crankshaft sensor since when i cleaned my old one my engine started right up.

@stealthg35infiniti94 4 жыл бұрын

Very good video like always...Did you try cleaning the connector prior to replacing the sensor? Corrosion on the pins/connector can give you a false fail for sensor.

@AnthonyJ350 4 жыл бұрын

Car ran perfectly fine, I just wanted a new sensor in there.

@Lifeofshawnyg Жыл бұрын

I need help alot i replaced my camshaft position sensors on the left and right bank and its still throwing a p0345 code do you think its the crank shaft

@AnthonyJ350 Жыл бұрын

Did you use Hitachi?

@chrisrusso4089 Жыл бұрын

if i do the break pedal and the lights and horn do i still have to leave it overnight. if i dont leave it overnight i just have to do the ecu reset right?

@AnthonyJ350 Жыл бұрын

Correct, if you want to speed it up, just do the ECU reset.

@slide50t 3 жыл бұрын

Hi....i looked at this but I found it on the driver side underneath the engine. Thank you

@AnthonyJ350 3 жыл бұрын

I'm pretty sure the one in the video is on the driver's side as well. Thanks for watching!

@kiwiwarlock 2 ай бұрын

I’m not seeing it mentioned on any other video but I’m assuming you have to drain the oil

@AnthonyJ350 2 ай бұрын

You don't need to

@bryanramos3299 4 жыл бұрын

Really interested in that digital gauge, any info on it?

@AnthonyJ350 4 жыл бұрын

It's a Greddy Infometer Touch, here's the video we on it kzfaq.info/get/bejne/op-qesZyvpmxgXU.html

@hellaswaggy3786 Жыл бұрын

My 04 350Z takes like 10 secs to finally turn over. Thinking this is the culprit. I dont have any codes at the moment but was told this is one of the most common issues.

@AnthonyJ350 Жыл бұрын

Definitely change this and the camshaft position sensors with the Hitachi brand.

@Hyphy__Lyfe 8 ай бұрын

After crank position sensor car still taking a bit of turning over to start what could it be still throwing same code p0335

@AnthonyJ350 8 ай бұрын

Battery is in good condition and all the grounds are good?

@Em-fk6kq Жыл бұрын

So I have a light for crankshaft, I’ve replaced three diff times and am not sure what to do. Made sure everything was plugged

@AnthonyJ350 Жыл бұрын

Did you use the Hitachi brand, and did you do the ECO reset after? Is the plug or wiring itself damaged?

@Em-fk6kq Жыл бұрын

@@AnthonyJ350 yes I’ve used hitachi brand twice and wires look fine, I’ve reset ecu

@jorgeespinoza9464 2 жыл бұрын

Question. My z been having non stop moving idle no engine check light what can it be

@AnthonyJ350 2 жыл бұрын

Might need an idle relearn. Did you change anything on the car? Possible small vacuum leak on the engine. Here's the ECU reset procedure kzfaq.info/get/bejne/a9qBoJVpsJmWg4U.html

@prietosebastian 2 жыл бұрын

is it the same for the vq35hr engine? and very well made video!

@AnthonyJ350 2 жыл бұрын

I'm actually not sure to be honest, I haven't worked on am HR engine. You'll have to get a service manual to confirm

@brayanramos644 Жыл бұрын

My Z starting to take a while to turn on it cranks for like 5-10 seconds then turns on! You think this might be my issue?

@AnthonyJ350 Жыл бұрын

Could be, I would also change the camshaft position sensors. How old is the battery?

@whsfakey9376 3 ай бұрын

I’ve switched it out about 4 times with hitachi sensors on my 2005 g35 and it still keeps starting in the second try, P0355 is the only code that pops up in my car what should I do ?

@AnthonyJ350 2 ай бұрын

Try upgrading all the electrical grounds

@petersonedmond456 2 жыл бұрын

My G takes a while to crank over sometimes gassing it helps, I even have the VDC off and slip light on, people are saying to change out the cam/crankshaft sensor, you think so too? I’m waiting for the parts to come in as we speak

@AnthonyJ350 2 жыл бұрын

Honestly it's worth changing them regardless. Been getting a lot of feedback of them failing. If bad enough it can leave you stranded.

@AnthonyJ350 2 жыл бұрын

Make sure to perform the ECU reset after kzfaq.info/get/bejne/a9qBoJVpsJmWg4U.html

@petersonedmond456 2 жыл бұрын

@@AnthonyJ350 thanks for the replies, I appreciate it

@AnthonyJ350 2 жыл бұрын

@@petersonedmond456 No worries feel free to comment or message me on Instagram. Same name on IG.

@AnthonyJ350 2 жыл бұрын

@@petersonedmond456 Also if you want some free stickers, email us your mailing address at info@gofasthavefun.ca 🙂

@xSENIK1 3 жыл бұрын

Do you have to do any thing after? Like a reset

@AnthonyJ350 3 жыл бұрын

It's a good idea to do a reset. Here's the video kzfaq.info/get/bejne/a9qBoJVpsJmWg4U.html

@Jaydos1470 5 ай бұрын

I replaced the crankshaft sensor but I’m still not getting ignition. Could it be the camshaft sensors causing the issue ?

@AnthonyJ350 5 ай бұрын

The dash lights are on? Does the fuel pump prime? Does it crank?

@Jaydos1470 5 ай бұрын

The issue is a long crank with no turnover. The dash lights are on also. So far my diagnosis:the fuel pump primes and squirts fuel (checked). Air intake and valve are working fine. Battery is in good condition. Just not getting spark. I’ve only replaced the sensor underneath so far.

@AnthonyJ350 5 ай бұрын

@@Jaydos1470 Check all the fuses with a multimeter. Do a continuity check

@aleon117 Ай бұрын

@@Jaydos1470I’m having pretty much the same issue. Gonna check the crankshaft position sensor and replace it. Hopefully that fixes it or else I’ll have to change the camshaft sensors. Did you get it fixed?

@Jaydos1470 Ай бұрын

@@aleon117 hey man, I DID get it fixed. It was the camshaft position sensors on both sides of the engine. Honestly I should have done it from the start but it’s best to replace them all at the same time not just one of them. As they all need to work in consecutive order to send the okay to ignite the engine. The camshaft ones are pain to reach (my hands are huge too so they barely fit) but if you watch a KZfaq video on them you can see where they are and get a feel for where the plug is that you need to pull out.

@BaybeeofJBD Жыл бұрын

can you help me man. idk if its related but when I accelerate slow, my Z has been stalling. like if I'm going 1mph it'll stall but then if I give it more gas before it stalls out its fine. no code either

@AnthonyJ350 Жыл бұрын

Have the cam position and crank position sensors been changed out with Hitachi replacements?

@BaybeeofJBD Жыл бұрын

@@AnthonyJ350 I'm going to now, just wasn't sure since there's no code at all. Thanks tho

@BaybeeofJBD Жыл бұрын

@@AnthonyJ350 my car has 140k, is that about the time they start tweakin?

@franciscoreyes771 Жыл бұрын

@@BaybeeofJBD did you fix it?

@BaybeeofJBD Жыл бұрын

@@franciscoreyes771 waiting for parts to come in my man

@bofa8831 Жыл бұрын

Hello, I have a malfunction in my Nissan z350, and no one has been able to fix it. The car does not exceed 2RBM. I want to send you a video of the car problem. How much is that possible, please?

@AnthonyJ350 Жыл бұрын

Is there a check engine light?

@migueldiazdz6890 3 жыл бұрын

No encuentro el sensor de levas de mi z es motor hr 2008 alguien me podría ayudar

@AnthonyJ350 3 жыл бұрын

HR engine is a different setup than the DE. I would get a service manual for the vehicle or check with the dealership.

@LuxAudio389 Жыл бұрын

Yes always go OEM or find the OEM's manufacturer.

@AnthonyJ350 Жыл бұрын

Thanks for watching!

@merkey 2 жыл бұрын

This possible to throw a po300 code as well?

@AnthonyJ350 2 жыл бұрын

Maybe, was the car recently worked on? If that sensor is old it's a good idea to just change it as people have been messaging me a lot of failures given the vehicle's age.

@basedale 3 жыл бұрын

Does this work for a 370z as well?

@AnthonyJ350 3 жыл бұрын

I'm sure it's similar but I can't confirm because I never did the job on a 370Z

@thorss Жыл бұрын

I have an 08 350z is it in the same position for some reason I dont see it lol maybe I'm blind

@AnthonyJ350 Жыл бұрын

It might be different, they're setup different on the bell housing.

@newnameauto 4 ай бұрын

Is this applicable to A/T as well?

@AnthonyJ350 4 ай бұрын

Probably

@sidewaysluis4758 3 жыл бұрын

Is it different for the hr?

@AnthonyJ350 3 жыл бұрын

Crankshaft might be the same but I wouldn't be surprised if the camshaft set is different.

@michael032 11 ай бұрын

Does unplugging your battery reset your ecu?

@AnthonyJ350 11 ай бұрын

If unplugged for long enough it can.

@carlosguerra283 2 жыл бұрын

Is electric grease necessary? Whats the purpose?

@AnthonyJ350 2 жыл бұрын

It's not necessary. The purpose is to help ensure corrosion doesn't occur inside of the connection.

@pinkyman75 9 ай бұрын

Is this still good for a 04 350z?

@AnthonyJ350 9 ай бұрын

Yes it should be.

@herbydenozil7942 3 жыл бұрын

Thnx

@AnthonyJ350 3 жыл бұрын

Thanks for watching!

@shinewoods3856 4 жыл бұрын

Have a 08 350z what is value 82000 2nd owner

@AnthonyJ350 4 жыл бұрын

Not sure

@DjayJohn 3 жыл бұрын

Is this part fit the HR also?

@AnthonyJ350 3 жыл бұрын

HR would have one. Verify the part number though.

@michaelgomez4994 2 жыл бұрын

@@AnthonyJ350 does the HR have 1 or 3 sensors?

@AnthonyJ350 2 жыл бұрын

@@michaelgomez4994 That I don't know. I haven't studied the HR engine too much as far as those details go.

@matthewjones3073 3 жыл бұрын

This different for autos?

@AnthonyJ350 3 жыл бұрын

Should be the same.

@jabez8668 Жыл бұрын

What site did u get the Japanese sensor from?

@AnthonyJ350 Жыл бұрын

I bought it locally, but RockAuto has it I believe.

@jabez8668 Жыл бұрын

@@AnthonyJ350 Thank you for responding! When you say local, you mean a common auto parts store like Advanced Auto or Autozone?

@AnthonyJ350 Жыл бұрын

@@jabez8668 I purchased from a distributor that mainly sells to professional shops. I have a few contacts.

@RebeccaPaige 2 жыл бұрын

What will happen if you don't do the reset?

@AnthonyJ350 2 жыл бұрын

Time stands still.

@AnthonyJ350 2 жыл бұрын

It might not read things properly because it's looking for the old sensor

@sinongol7116 4 жыл бұрын

👍👍👍

@AnthonyJ350 4 жыл бұрын

Hope the video helped you!

@luiscruzcedeno8642 9 ай бұрын

I replaced my camshaft sensor but still have the same problem I think is a fuse you know ware the fuse is located for the camshaft sensor

@AnthonyJ350 9 ай бұрын

What's the problem?

@luiscruzcedeno8642 9 ай бұрын

@@AnthonyJ350 i replaced the camshaft sensor but still the same problem im getting the same code

@AnthonyJ350 9 ай бұрын

@@luiscruzcedeno8642 What's the code? You used Hitachi brand and did an ECU reset?

@luiscruzcedeno8642 9 ай бұрын

The code is camshaft position sensor bank 2 I replaced it reset the code but it came back

@AnthonyJ350 9 ай бұрын

@@luiscruzcedeno8642 Check the wiring on that sensor

@sheanaugustin3462 Жыл бұрын

Should it be oem?

@AnthonyJ350 Жыл бұрын

Preferably Hitachi.

@shannonbonefont2661 3 жыл бұрын

Where’s the video on reprogramming the ECU ?

@AnthonyJ350 3 жыл бұрын

Here's the ECU reset video kzfaq.info/get/bejne/a9qBoJVpsJmWg4U.html

@admiralgoodboy 2 жыл бұрын

Is there only one crankshaft sensor?

@AnthonyJ350 2 жыл бұрын

Correct, only 1

@admiralgoodboy 2 жыл бұрын

@@AnthonyJ350 thanks boss just replaced it. Check engine light still on. Haven't done the camshaft sensors yet. Hopefully once there done the light turns off

@AnthonyJ350 2 жыл бұрын

@@admiralgoodboy Make sure to also perform the ECU reset procedure kzfaq.info/get/bejne/a9qBoJVpsJmWg4U.html

@admiralgoodboy 2 жыл бұрын

@@AnthonyJ350 the light is still on must be camshaft? Performed procedure made no difference ill have to get me one of them scan tools

@admiralgoodboy 2 жыл бұрын

Its driving no problem

@n54dan 3 жыл бұрын

That part number you got in the description is for the camshaft sensors and not the crankshaft

@AnthonyJ350 3 жыл бұрын

That's the part I got from the parts store and installed. Would it really be different? It's a sensor that watches a metal part spin.

@n54dan 3 жыл бұрын

AnthonyJ350 yea they both do different things

@AnthonyJ350 3 жыл бұрын

@@n54dan Weird, my car runs great though.

@n54dan 3 жыл бұрын

AnthonyJ350 yea bro idk

@AnthonyJ350 3 жыл бұрын

@@n54dan What's fundamentally different besides the label of the parts?

@fU296a 2 жыл бұрын

You have to drain oil

@AnthonyJ350 2 жыл бұрын

No, this sensor reads the flywheel.

@autoperformance503 4 жыл бұрын

My 350z was on drive Ac on in drive through and car all of sudden dies.

@AnthonyJ350 4 жыл бұрын

Might need to change out the crank position sensor and camshaft sensors. Did it throw any codes?

@autoperformance503 4 жыл бұрын

AnthonyJ350 no codes

@autoperformance503 4 жыл бұрын

I was getting food in drive thru . And car died . And then it turned on

@AnthonyJ350 4 жыл бұрын

@@autoperformance503 Make sure your battery terminals are clean and tight. If that's good you can also check the IPDM and fuel pump relay. Then I would change the sensors. Camshaft and crank position sensors are notorious it seems as the cars are getting to this age. I would replace them with Hitachi versions regardless.

@autoperformance503 4 жыл бұрын

AnthonyJ350 is it hard to change the sensors ?

@pres1034 3 жыл бұрын

Be careful when you say the repair is for the Nissan AND the infinity because i have have a 2008 g-35 journey and nothing from the Nissan lols like the infinity I had; neither the protective plate, the cross bars, nor the crankshaft position sensor resemble anything in the video.

@AnthonyJ350 3 жыл бұрын

You have the HR engine, this is a DE RevUp.