Fixing a creaky joint in a rocking chair spindle joint with another dowel alongside the spindle, but in such a way that the result is hidden. woodgears.ca/repairs/
Пікірлер: 266
@SeanHodgins3 жыл бұрын
So many clever tricks in one short video.
@jacobdegeling3 жыл бұрын
Mathias' clever clamping has always impressed me
@Warrigt3 жыл бұрын
Can I request an extended cut of Matthias in the rocking chair rocking while staring at the camera?
@elDoober3 жыл бұрын
Matthias OnlyFans, when?
@mushin1113 жыл бұрын
Reminds me of Vinheteiro. Slightly creepy / erotic.
@cpobyrne13 жыл бұрын
@@mushin111 touch of norman bates perhaps!!
@sparqqling3 жыл бұрын
He should loop it and make it a 2 hour video!
@matteopascoli3 жыл бұрын
Playing a banjo
@Wordsnwood3 жыл бұрын
I didn't expect that to drill so cleanly.
@matthiasrandomstuff22213 жыл бұрын
Neither did I!
@mk65953 жыл бұрын
I think those brad point bits have a sharp cutting outer edge, unlike standard twist drill bits.
@Kineth13 жыл бұрын
Wait... Did someone actually use a spokeshave to shave a spoke? What will they think of next!
@BandasPalette3 жыл бұрын
😁😁😁
@johnmcmunn38273 жыл бұрын
No pocket screws but a pocket dowels :)
@Peekul12 жыл бұрын
Lol Mathias rocking at the end while listening and posing. Cracked me up. Great fix. It's really a joy watching you work.
@mccoydiego54443 жыл бұрын
The owner wants his rocking chair back. 🤣
@MrVodKanocker2 жыл бұрын
haha best comment on thread
@treynamy3 жыл бұрын
I love all your videos man. Been a fan for many, many years! These types of fixit videos though, are the ones that drew me to your channel. I hope you and the family are all doing well!
@mickenoss3 жыл бұрын
First Matthias video I watched was a moustrap video, stayed for the comedy and woodcraft. 🤣
@LifeSizeTeddyBear3 жыл бұрын
I would love to be able to share this video with my grandfather who was a keen woodworker, but he died decades ago. Your videos engender happy memories of spending time with him in his workshop.
@BLenz-1143 жыл бұрын
You're a magician!! I would never have even thought it possible to drill that hole, and you did it with a 5 minute jig. We stand in awe.
@jimthesoundman86413 жыл бұрын
Thomas Johnson has a great furniture repair channel on KZfaq. He was just working on some dowels in his last video. He also does amazing stuff with veneer repairs, quite amazing to watch him work.
@hotrodhog21703 жыл бұрын
Have watched him for years! Amazing that he actually replied to an email I sent him when I had questions about a 1930's kitchen table I wanted to restore. Guy is really down to earth!
@AdityaMehendale3 жыл бұрын
That's the carpentry-equivalent of a root-canal :)
@cornthrow1373 жыл бұрын
legend has it he is still rocking in that chair
@shookings3 жыл бұрын
When an engineer says "that worked like it was supposed to"...
@s0nnyburnett3 жыл бұрын
But rocking chairs are supposed to creak
@Konzertheld3 жыл бұрын
...it always has an undertone of surprise.
@Eazoon3 жыл бұрын
Gotta say, I really love how you take discarded furniture and make them nice. It's a nice contrast from the plastic-wrapped world all around us.
@johnfithian-franks82763 жыл бұрын
A great fix to an awkward joint, you got the stain off just right as well, if I was using that it would creek a hell of a lot but it would be my joints and not the chair, perhaps I should let my GP see this video but I don’t like the idea of letting him loose with a drill.
@WadeSmith193 жыл бұрын
I love the awkward stares at the end of every video
@garymarlow96123 жыл бұрын
That was...AMAZING! The actual fix was simple but the set up...WOW!
@inspector17943 жыл бұрын
Nicely done. I'm using dowels more and more and finding them really useful. Have you done any vids on using them, I'd be interested in learning more. Thanks for sharing.
@matthiasrandomstuff22213 жыл бұрын
See woodgears.ca/dowel
@inspector17943 жыл бұрын
@@matthiasrandomstuff2221 Thanks for the link. If I was a bit smarter I'd have searched your you tube channel too.. You do good stuff, thanks
@briannelson6053 жыл бұрын
Its amazing how you find such stuff in the trash
@johnmaahs97903 жыл бұрын
nice fix. I would have never thought of that
@raulc.3 жыл бұрын
I don't mean this any negative sense... You are such a woodworking nerd... Love your ideas!!!
@arponto3 жыл бұрын
This is very timely for me. I have an old rocking chair of my grandmother's with a similar problem I want to fix. Thanks.
@mikes13453 жыл бұрын
About one year after I worked on some old chairs you show me a better way. I took them apart and used moldable epoxy stuff and a lot of sanding to get my shapes back. Hours of work
@TheLaoruga3 жыл бұрын
This is the king of videos that I love from Mathias. Lots of information in a very short time.
@mgweatherman083 жыл бұрын
Our family had this same exact rocking chair (or similar style) and got rid of it because of the same problem. We loved that chair. That was years ago, wish we could have seen this great fix before throwing it out!
@SuperDeinVadda3 жыл бұрын
You could have oiled the joint. (no joke) would have stopped the creaking also.
@logans2123 жыл бұрын
Looks like a Matthias pocket hole jig for dowels.
@marcusw.33263 жыл бұрын
I must admit...your chair repair vidoes are some of my favorites.
@MightyGiant3 жыл бұрын
I agree. So satisfying!
@StephenLinhart3 жыл бұрын
A spectacularly elegant solution.
@darrellbedford48573 жыл бұрын
Interesting repair method. Mathias, you come up with some interesing but simple repair methods. Keep them coming.
@MrJohnnyboyrebel3 жыл бұрын
You never cease to amaze me.
@tcsyme3 жыл бұрын
Matthias, beautifully executed, well done!
@kurdtpatton50392 жыл бұрын
I'm so happy people like you do what people like me wish we could do. Thank you for being you!
@machzel083 жыл бұрын
I am super impressed by that fix. Nice job.
@ZeedijkMike3 жыл бұрын
That's what I call a super repair. You are a very clever and creative man.
@JoseSilveira-newhandleforYT3 жыл бұрын
Your creativity never ceases to amaze me - good call :-)
@nicholastinling10223 жыл бұрын
Very creative. This will go in my scrapbook of restoration and repair clips.
@Canilash3 жыл бұрын
I personally like the creaking rocking chairs. Great job on the repair.
@BenMitro3 жыл бұрын
I would've said "that's attention to detail", but really this is "ATTENTION TO DETAIL" Really cool solution Matthias.
@tinkermouse-scottrussell37383 жыл бұрын
Enjoyed watching this one all come together, thanks for taking the time to share it with us. Play Safe From Elliot Lake Ontario Canada.
@runningmangray3 жыл бұрын
I myself would ave never thought of fixing the problem like that, that really is simply ingenious
@harryragland78403 жыл бұрын
I had the same problem with the rocker I used when my kids were small. However, it turned out all of the creaking and groaning was coming from me owing to the fact I'm 50 years older than my son.
@transpiler3 жыл бұрын
This feels like main channel content
@thibaultjehl28563 жыл бұрын
Quick and clever, as always ! This belongs to the main Channel.
@Mulletmanalive3 жыл бұрын
Worrying is like a rocking chair: it gives you something to do, but it doesn’t get you anywhere. Write that down.
@googmeller33703 жыл бұрын
Matthias du bist eine KZfaq Legende
@samTollefson3 жыл бұрын
Brilliant, as usual! Hats off to you.
@ps3moe3143 жыл бұрын
Well done sir. Just when i think my horsing is under control, u put out this video tha makes me want to save all the trash i see on the road. Keep up thr great work.
@buannajim80913 жыл бұрын
As Bill Murray said in Stripes, "$100 shine on a $3 pair of shoes". You never fail to get the job done, Matthias. Great content as usual.
@TFlorian3 жыл бұрын
Nice setup ! I was very afraid to see the drilling but "its word as expected" Nice work
@cannon4403 жыл бұрын
That is a strange/unique way to fix that loose dowel. It is excellent.
@MCsCreations3 жыл бұрын
Awesome solution, Matthias! Really nice! 😃 Stay safe there with your family! 🖖😊
@wolfgollnitz8993 жыл бұрын
Amazing! You make it look so easy.
@TheCatanzaroShop3 жыл бұрын
I love the simple solution and it looks great!
@BumbleBeeTF3 жыл бұрын
Brilliant!!! That worked so well.
@andrewsuderman3 жыл бұрын
These are the Matthias videos I subscribe for
@tollertollertoller3 жыл бұрын
You are a repair smith. Well done, dude.
@OnkelPeters3 жыл бұрын
Matthias Wandel turning into Thomas Johnson Furniture Restauration👏🏻
@DarrinCalvinRoenfanz3 жыл бұрын
Boss comment
@hotrodhog21703 жыл бұрын
Tom is badass!
@buddyclem73283 жыл бұрын
Are you hungry? You almost wrote restaurant, instead of restoration.
@Velho813 жыл бұрын
Amazing, this is just what I needed. Could you tell how I could repair those handlebars also? atleast otherside is loose on our chair.
@philipmurray97963 жыл бұрын
Matthias hair looks like a sleepy kids' coming into the living room on Christmas morning.
@mechcntr71853 жыл бұрын
Impressive repair, good job.
@mechminded22073 жыл бұрын
That vacant stare rocking at the end was very disturbing. Keep up the good work.
@ianvicedomini26483 жыл бұрын
Awesome repair
@jr30023 жыл бұрын
Very thoughtfully done!
@jgurtz3 жыл бұрын
Super nice repair, what a find! Totally jealous
@Sceme19913 жыл бұрын
Quite a neat fix!
@orange133 жыл бұрын
is that called a "pocket dowel" ?
@michaelwhiteoldtimer76482 жыл бұрын
Love the new ideas
@spencerbass71423 жыл бұрын
Great video.
@BandasPalette3 жыл бұрын
Matthias out here making pocket dowels. 😁
@chemcody51193 жыл бұрын
Brilliant fix!
@Gunbudder3 жыл бұрын
i'm gonna have to remember this one for some of the ancient chairs i have laying around
@mrnetwurm3 жыл бұрын
Excellent work
@marblecountertops30983 жыл бұрын
A guy like me just injects wood glue into that joint and gets pissed when it starts creaking again. Happy to watch a master in action!
@artswri2 жыл бұрын
Would have bet against that going well... A tricky fix perfectly executed, wow!
@ChrisUhlik3 жыл бұрын
OMG, you are such a genius
@konstantinusstoyanov97493 жыл бұрын
It seems your curb is full with goodies, nice
@eduardkhaimov99273 жыл бұрын
I love this solution thanks for the idea
@LeonardoArchi3 жыл бұрын
You sir are a genius
@creativeobsin3 жыл бұрын
That's really clever!
@BigBlack813 жыл бұрын
THIS is quality content. THIS.
@smash59673 жыл бұрын
The most impressive part is how you managed to get the stain match so easily.
@mickenoss3 жыл бұрын
Dude, the creaks are the best bit about rocking chairs!
@iivarimokelainen3 жыл бұрын
what a cool fix
@GaryTruesdale3 жыл бұрын
one of your best!
@englebig3 жыл бұрын
Very well done, as always... But I wonder if the pin idea would not have worked. I like to use bamboo skewers as pins for situations like these. My gut tells me that would have been enough here, but I wonder.
@JDeWittDIY3 жыл бұрын
I like the way you think Matthias!
@DullPoints3 жыл бұрын
I can't believe this worked. I have relied on thin epoxy, but this is so much faster!
@fastenboalbus49973 жыл бұрын
matthias, you're a rock star !! ;-)
@chefbob093 жыл бұрын
Awesome as usual
@dougprentice13633 жыл бұрын
I was just going to comment exact same thing.
@bitjockey62652 жыл бұрын
Ingenious!
@rickolson90113 жыл бұрын
Exceptional problem solving!
@azashukri53223 жыл бұрын
I loved the video
@fromatron3 жыл бұрын
incredible
@perrybrown49853 жыл бұрын
I laughed at "this is going better than I thought is would" - you and me both :-)
@decomputerleraarable3 жыл бұрын
I said it before, butt your'a genius. Rob
@davidebarranca53703 жыл бұрын
Great stuff! A bit creepy the rocking chair scene in the end :-D
@itwillbenicewhenitsfinished3 жыл бұрын
Brilliant (as always!)
@davidmcgrath65073 жыл бұрын
Astounding!
@philjegues3 жыл бұрын
I cannot remember the last time I saw Matthias use a hand saw! @Matthias - I am surprised you didn’t jig it up on the table saw. ;)