Creality Ender-3 S1 In-Depth Review: Including almost all upgrades you want, is it worth $399?

No video

Creality Ender-3 S1 In-Depth Review: Including almost all upgrades you want, is it worth $399?

Рет қаралды 107,119

Күн бұрын

00:00 - Intro
00:36 - Upgrade options for a basic Ender 3 Pro
02:10 - Ender 3 S1 New features, does it worth $399?
03:51 - Unbox, assemble, and setup
09:17 - Install Slicer software and setup printer profile
10:24 - Test Print 1: XYZ Calibration Cube
11:07 - Test Print 2: Tiny bolt and nut
11:43 - Test Print 3: 3D Benchy
12:03 - Test Print 4: 270mm tall Eiffel Tower to test the filament retraction of this new direct extruder and use up the maximum Z-height of this printer
13:34 - Test Print 5: Flexible iPhone case using TPU filament
14:19 - What I think this printer can improve on
17:14 - What I link about this printer
19:45 - Ending
**************
3/24/2022
Please check out my latest Ender-3 S1 Pro review video:
Creality Ender 3 S1 PRO: In-depth review, Ender 3 S1 VS Ender 3 S1 PRO, side-by-side comparison
• Creality Ender 3 S1 PR...
**************
Welcome back to Aurora Tech Channel. Today, I am going to review the latest Ender-3 S1 that I recently received from Creality. I would like to thank Creality for sending me the printer to review. I will go through the features of this printer, do a quick assembly walkthrough, do some test prints, and most importantly, I will talk about what I like and what I think this printer can improve on.
I have no plans to do any upgrades on this printer yet, the stock setup is really good. I have many 3D printers, many of which are from Creality. I have an Ender-3, an Ender-3 Pro, a CR6-SE, an Ender-5 Pro, two CR-10S Pro V2 printers, and my new favorite: the Ender-3 S1. It has the best direct extruder from a stock setup, and the print quality is really impressive right out of the box, the hardware configuration and print quality are hard to beat.
So, if you’re considering buying your first 3D printer or if you just have an Ender-3 or other basic machines and want to purchase a mid-range printer that doesn't really need any upgrades, this is an excellent choice.
Affiliate links:
Buy Ender-3 S1:
shrsl.com/48q1l
Buy Ender-5 S1, get SonicPad for free, Combo price $479 (with discount code)
shrsl.com/3xy7v
Discount code for Ender-5 S1 + SonicPad Combo:
US Store Save $120 discount code: 12ES5
CA Store Save $150 discount code: 15SE5
AU Store Save $150 discount code: AUS150
UK Store (no code is needed, GBP 499)
DE store (no code is needed, EU569)
EU store (no code is needed, EU569)
Creality REFURBISHED 3D Printers (SAVE up to 50%)
bit.ly/3EGO2UR
Used Ender-3 ($79)
Maybe in bad condition, but if you know how to fix a 3D printer and have spare parts to replace by yourself, that could be an amazing deal:
bit.ly/3LPnzHw
HATCHBOX PLA 1.75mm 1kg spool
amzn.to/3lYjENO
Overture high speed Flexible TPU 1.75mm 1kg spool
amzn.to/3IC0OWi
Test Print 3D Models:
Eiffel Tower:
www.thingivers...
iPhone SE 2020 case:
www.thingivers...
Follow us on Twitter:
/ aurora_lung

Пікірлер: 327

@shoeonhead 2 жыл бұрын

You are such a good presenter and know way more than i do about printing. I watch all the videos you make because they help inform my purchasing decisions. Excellent work Aurora!

@daitedve1984 Жыл бұрын

She is not. I don't feel anything "solid" in a girl-presenter, who dig in tech stuff. It's like same girl will offer you to invest in bitcoin - will you?? 😆 Me - definitely not.

@divinginthedeep 2 жыл бұрын

This girl in this age: Assembling and testing and upgrading and reviewing 3D printers like a real PRO. Me in this age: Am I tying my shoelaces right? Hmm, let me check... Thank you both you guys for so much information to us oldies on how to do these things - really, thank you! I've already ordered this as my second printer to my Ender 3. Thanks to you, I will be doing some more upgrades on that one also. Love this channel!

@robertrichard4861 2 жыл бұрын

Shes about 30yrs old. Don't let her asian youth fool you!

@divinginthedeep 2 жыл бұрын

@@robertrichard4861 Oh - very youthful for her age. Well, I hope they stick around for many years to come, keep helping us with our printing stuff!

@antlu65 2 жыл бұрын

Creality could hire you to do their instructional videos. Would have saved me a lot of hassle to get clear instructions like this. Good stuff! 👍

@how2tinker292 2 жыл бұрын

Your videos are awesome. I just ordered this printer, my first 3D printer, and was glad to see such a detailed review. Special thanks to you and your brother for making great videos. I'm a bit older but your videos are very detailed yet easy for me to understand.

@cdearden1 2 жыл бұрын

This was the most competent review of any 3d printer I have ever seen. Amazing job

@ALZHEM 2 жыл бұрын

You are great! One of the best reviewers out there :D

@Mr_Squarepeg 2 жыл бұрын

I have been waiting for a review of this machine.

@benshaver7570 2 жыл бұрын

You, young lady, are an excellent presenter. Thank you for your time and effort. My Ender 3 S1 arrived today.

@magicgundam 2 жыл бұрын

Just ordered an S1 based off of this video, thanks so much for the insight and detailed information. The upgrades included on this machine are definitely substantial enough for me to jump in on despite already having 2 original and 1 pro Ender-3 machine in my studio. Now all I need to do is figure out where in my studio to fit this S1 and the Elegoo Saturn I just splurged on 2 weeks ago... lol.

@paulcumber4732 2 жыл бұрын

hope you have a nice christmas and happy new year

@AuroraTech 2 жыл бұрын

Thanks, you too!

@marianososa4309 2 жыл бұрын

Your videos are excellent! I like that you actually show us everything you do, not like many youtubers who sits in front of the cammera and only talks with no proof of anything... Thanks a lot for the info!!! I want this printer!! Hehe...

@vintageracer3734 2 жыл бұрын

I'm absolutely buying one of these for my Birthday! Makes getting older slightly less pain full. Love your reviews and admire both your technical skills. A++ review/channel!

@dancingpenguin3731 2 жыл бұрын

One of the best 3D printer youtuber!! fast to the point and very clear !!

@Happy3dprinting 2 жыл бұрын

I researched many machines and reviews, as a novice I found it difficult to understand everything being explained in most reviews. I wanted a machine that I could use easily with features that seemed to be commonly added to basic machines. After watching your review which is excellent and I could see the benefits of the Creality Ender 3 S1. So I bought one and I used your review to help setup the printer and it’s been working without issues ever since. Thank you for producing such great reviews and keep them coming as I am still learning and your videos are very informative. Great Job :)

@ChrumkavySuchar 2 жыл бұрын

Thank you for the review Aurora. You were nearly the first one to post a review of this printer, impressive :) . I hope that printer FW will get moded by jyers or someone, so they fix the things you mentioned in the video.

@skaharn 2 жыл бұрын

Hello! 3D printing noob here, I was looking into some printers and a friend told me about this one which brought me to your review. Thanks a lot for the very informative review, it's really well-made! Keep up the great work, you deserve at least 100x more subs!

@thomaspc2 Жыл бұрын

I just got a Creality Ender-3 S1 and after 3 previous junk printers, this one is awesome. Set it and forget it.

@grzewikpl8562 2 жыл бұрын

Thank you for making these videos. I recently used your tutorial how to install the 3D touch on an ender and that made it so easy for me to do it.

@veracity91 Жыл бұрын

You are probably the best 3d printer reviewer on youtube. You and your bro are Great! Thank you for your hard work

@Nifty-Stuff 2 жыл бұрын

Hey East Bay neighbor, another great video! GREAT timing since I've been wanting to add a new printer to upgrade from my CR-10. I had an Ender-3 V2 in my shopping cart, but cancelled it after watching this video, and now I'm going to get the S1. Keep up the great work!

@theofficialverafied5528 2 жыл бұрын

Instant subscribe. She is so well spoken and the editing was amazing!

@darrenstettner5381 2 жыл бұрын

Just got one. It’s my first 3d printer and I’m totally stoked on it. I definitely recommend it though I’m also a total newb. I’m just surprised every time the prints come out so well it’s amazing.

@nicholassummerlee6843 2 жыл бұрын

Completely blown away by your level of knowledge and how young you are. My faith in American youth is restored.

@waktank4842 2 жыл бұрын

I hope creality will do something about the naming they use. It so confusing ender 3, ender 3 pro, ender 3v2 ender 3 s1.... Possible new customers have to guess what is the latest..

@portcityengineering 2 жыл бұрын

You are so talented at such a young age! You’re parents must be so proud🤜🏽💥🤛🏽 don’t ever quit KZfaq! I believe you will go a long way😄

@martshal 2 жыл бұрын

Kudos young lady, I think I get as much or more info from you and your brother's videos as from other KZfaqrs that are designers and engineers.

@RaviBabooram 2 жыл бұрын

Would you recommend the Prusa mini + or the Ender 3 S1 for someone that's purchasing their second printer?

@JoeWayne84 2 жыл бұрын

Maybe add a running decibel meter for sound during printing and compare it to other printers . To me having a printer that runs as quiet as possible is very high on the list of importance .

@Spelter 2 жыл бұрын

A few remarks about the Upgrades: The filament Sensor is not getting if filament is stuck I guess, only if it runs out. A nice feature, 5 Euros is ok. Dual Z Axis is bad! We know how bad the Z axis screw is on every Ender 3. We never found one that has a good screw and runs synchronous with the second one. I removed this upgrade and bought linear rails to have a more even out Z axis and layering - 120 Euros for the rails and I still print and make the upgrade parts. No Touchscreen, my biggest complaint. It's in color now, but still no touch. The appearance is great, I like the gantry and v-slot covers. But my biggest complaint for this build is: Still the same shitty heated bed that warps like a tortilla. I've got a 5 mm precision Al Mg4.5 Mn0.7 plate for 18 Euros and drill the holes into it - this one will never warp again. A silicon mat for heating it and cork for insulation of the bottom. 18 Euros, plus 38 for the heater and 5 for the cork, to finally have no problems with the bed anymore. The CR touch is a cool addon, but it only compensates for the shitty bed. And having Prusa like a buildplate that "jumps" off the bed, is only good when the bed will not make an arc in the middle. The PSU is the same, and the Bigtree Mainboard is not bad, but for bed and heater an external Mosfet is a good idea. I have the same Mainboard and if the onboard Mosfet dies, it's 50 bucks and not 8 for the external ones. The direct drive is something fantastic in this upgrade, the plastic extruder of the other Ender 3 was really crap and I switched to full metal asap and then the Voron M4. Now I print the Voron Afterburner DD. Creality did some good, but also some stupid decisions here. I guess it's also as loud as the old version, silent fans to get under 60DB would be a great change, but many have the printer not in the same room or in a housing I guess.

@ChristopherBenjamin 2 жыл бұрын

Great review of this printer. Very helpful and the S1 is now the frontrunner for my first 3D printer purchase. I am now a subscriber and looking forward to exploring your channel.

@vincentrodak9734 2 жыл бұрын

Love your videos. Thanks for all the excellent information on this printer!

@oncemore9552 2 жыл бұрын

They are improving bc of your tinkers upgrades😄 That's impressive. We watch you, They watch you.

@ominence5573 2 жыл бұрын

The "3D Printing Industry" should be privileged and grateful to have this very bright young lady talking facts. I subscribed after a minute, sorry it took so long. Well done and can't wait to learn more from you and your channel. Regards

@jasonharris2790 2 жыл бұрын

I feel so calm and relaxed after this. Great instructional!

@marklyon2633 2 жыл бұрын

This is definitely a great upgrade out of the box on the Ender 3 platform. I personally enjoy the modding process but I agree others might not enjoy all the troubleshooting that goes along with it. A positive of taking the mod route is you learn a lot about the printer and it's operation in the process. Another great video 👍

@RobotSnake 2 жыл бұрын

Hey, not related but I rarely see another Lyon. Most have an S at the end. HI Mark!

@Mobile_Dom 2 жыл бұрын

i would love to see a video of you tearing the hotend/extruder setup down, it looks almost Hemera like

@matthewhall9692 2 жыл бұрын

Wow really good job with this. I just assembled my S1 and it is my first 3d printer. Your video not only made me feel confident that I bought a solid unit but helped me with setup and calibration as well as the software said of things. Thanks a lot and great work!

@smaqdaddy Жыл бұрын

Just bought the S1 Pro today. Looking forward to testing it out tonight! You do a great job Aurora!

@MikeC19100 2 жыл бұрын

This was a very complete and interesting review of this 3D printer. I was considering this model as a second printer and your video helped me decide it would be a good addition for printing TPU and many other smaller models so my larger printer can concentrate on more complex and/or larger models. Thank you for an excellent review and the detailed comparison to upgrading the older models instead.

@royprince8575 2 жыл бұрын

Really enjoy your EXCELLENT videos! I am new to 3D printing. I have been thinking about getting a Prusa i3 MK3S+ but now I am considering the Creality Ender-3 S1. Any advice you have to offer is indeed welcome. Thank you.

@belakulcsar 2 жыл бұрын

What did you chose? I have the same dilema and i see you had no answear

@royprince8575 2 жыл бұрын

@@belakulcsar Currently I am thinking about the Prusa Mini or the Twotrees SP-5 CoreXY. The Mini because I can print out of the box. The SP-5 for the benefits of a CoreXY printer. I believe I have the skills to do the mods on the SP-5. If I just wanted out of the box printing with no experience, I would get one of the Prusa printers. Hope this helps.

@azurehydra 2 жыл бұрын

Extremely well made reviews. Very extensive and informational. 10/10

@onlyfor3dprinters153 2 жыл бұрын

Thanks for making this video... Today I got my new Ender 3 S1 3D printer...

@geekanoids 2 жыл бұрын

Great review. Do you slice and then put on the SD card, or do you send direct to the printer via USB connection (eg having a computer connected all the time and treating it like a regular printer)?

@BhutJolokias 2 жыл бұрын

I've been thinking of upgrading from my Ender 3 for some time now. After watching your video, I subscribed and ordered an S1. Thanks!

@deanbestall 2 жыл бұрын

A great review of what looks like another quality Creality printer

@Poesghost 2 жыл бұрын

WOW. So glad I found your channel. Great review and instructional video.

@ahmetmetinuzun 2 жыл бұрын

Can you please do two things for us? Please open the bottom, and let us know what the mainboard version is, and let us know whether the firmware is open source or proprietary. If we can't use Jyers or our custom built Marlin on this printer, it's pretty much a no for me.

@gpedrok Жыл бұрын

That was awesome, I just watched several reviews and yours was absolutely the best, I'm sudscribed now and rang the bell. Keep up the great work, did you write the entire script, well done

@attilaerdos7405 2 жыл бұрын

I really liked the show, but I'll watch it again because I've only been watching you so far because you're so nice! The printer will be delivered in February (€ 415), I hope I learn something by then! I wish you a happy new year!❤

@sergetheijspartner2005 2 жыл бұрын

Nice, i did the same upgrades to my ender 3 Pro and cam to around the same price and that did not include the dual Z-axis yet, it's about time Creality made these upgrades stock and I would not mind the price since it still is cheaper than doing them all manually, it is true you miss out on the "Fun" and you learn less about what 3D-printing entails but on the other hand a lot of non-technical people can do without that knowledge

@Anyone700 2 жыл бұрын

Totally Agree, wifi printing over phone is annoying, but it is easier to code.

@mrchris1979 2 жыл бұрын

Excellent video. After all the videos I've watched between all the Ender models and other brands, I feel the S1 would be a good upgrade for me. Great features, decent quality and its basically upgraded right out of the box. I kept going back to Prusa but the S1 seems comparable at a lower price point. Glad you included the affiliate links.

@tenorsopranosax 2 жыл бұрын

Thank you for your thorough review! I have an Ender 3 S1 and was completely perplexed by its behavior with G29 in the start code. Thanks for de-mystifying-I was ready to send mine back until I saw your review.

@l.l.coolray 2 жыл бұрын

I enjoyed that review, very clear and professional, would love to see you do a comparison with the anycubic vyper and the S1, or even just a review on the vyper. I am trying to decide between the two.👍👍👍😎🇬🇧

@williamwiese9963 2 жыл бұрын

Thank you for this beautiful highly detailed video, very nicely done! I subscribed and looking to purchase this for my first printer. Have a wonderful day

@Jestunes 2 жыл бұрын

Hi Aurora, You are an extraordinary young lady. I see great things manifesting as time passes for you. Thank you for educating me on 3D printers. I am 67 and have always been at the fore front of technology, and can actually brag about have one of the first ever portable computers (Timex) now called laptops but retirement has slowed me down quite a bit. I look forward to watching more of you and your brother in future episodes. I have been a craftsman and also in my work with Disney I became an Imagineer. This broadened my horizons and helped me learn new skills I needed to create new props, for both the movie and entertainment industry. You've got me sold on the Creality Ender-3 S1. As soon as my finances clear up I will invest in one. Thanks again for sharing...

@DaveDDD 2 жыл бұрын

Great review! I’m very excited to see how the sprite extruder holds up over time, and I’m glad they went with a probe bed leveling solution rather than another strain sensor like on the CR-6. I have to disagree that getting rid of the bed leveling wheels would be an improvement though - it’s a huge pain to try and get a perfect level if you’re tightening a dozen little screws every time you calibrate the bed. Though I’d definitely recommend that Creality ditch the springs in exchange for their silicone spacers, since those are so great at holding their level in comparison.

@ericthecyclist 2 жыл бұрын

what were the problem with the strain sensor on the CR-6? In theory, it sounded better to me.

@nico8273 Жыл бұрын

Hi ! Did you buy a S1 when it came out? if so how well did it hold after 1 year of use ?

@DaveDDD Жыл бұрын

@@nico8273 I never did end up getting an S1, but I did get three CR-6s. If I were to buy from scratch today, I’d probably recommend a p1p. Those look so slick for the price.

@GuppyRook 2 жыл бұрын

A configuration option in Marlin is to turn off bed heater during Z probes, in case the probe is sensitive to the noise of the PWM voltage driving the bed heater. Another configuration is to make sure the bed is at the specified temperature before probing, to account for heat-induced warping. So, it'll cool down while probing, move on to the next point and have to wait for the bed heat to get back to what it's supposed to be, then turn off the bed heater to probe again. This led me to turn off the option to only probe at the specified temperature, because the heat-caused fluctuations of the bed were smaller than the noise-caused fluctuations of probe triggering.

@sebastiennoir9758 2 жыл бұрын

Great video and great review. Great sound quality, with no boring music! Well done! 👍

@daitedve1984 Жыл бұрын

What real improvement could be is bed tramming, but in visual way - machine passes 5 keypoints, shows the difference between "medium" and specific point. Next you turn adjusting knobs and again BL-touch passes 5 points (what is quick) and shows new numbers (and you repeat adjusting). It's VERY easy to implement, but not done.

@crisscrow1128 2 жыл бұрын

Hope to see these new features on one of their larger build plate size printers, I have a ender 3 V2, these new features are tempting but not enough to get me to upgrade, but if these were on a larger printer with a 300 x 300+ build plate, I would be very interested.

@austinmulligan1848 Жыл бұрын

Such a quality video ! Very impressed with the quality of the content !! Liked and Subscribed ! :) I already own this printer but still managed to learn something :)

@SirRado 2 жыл бұрын

I really appreciated the detail you put into communicating your thought process here. I've been trying to decide which printer to go with, and keep coming back to the S1 but the cost is a little bit of a hangup for me. Your analysis gave me a lot of insight, and at this point I think the s1 is my ideal choice. Thank you for your work.

@asdrubalegirolamo660 2 жыл бұрын

Thank you, great video, very clear

@riggsron 2 жыл бұрын

A great review, much more thorough than most.

@ianbruce9603 2 жыл бұрын

Performing the full 270mm Eiffel Tower test was a terrific idea. It answered most of my questions regarding solidity, linearity and mechanical accuracy for this printer. Thanks as well for including a link to the file -- I'll be printing this one myself. I'll assume the 21 hour print time estimate from your slicer was accurate, or you would've mentioned something.

@printer8071 2 жыл бұрын

Thanks, a great review! I bought the S1 on the strength of this review and others. However, as a beginner, I am having a newbie problem it seems that everyone knows the answer to but doesn't talk about. When doing my first print, I printed directly to the bed, as it appears in your video. The print was great, but extremely difficult to remove from the bed. Bending the bed made no difference. I was finally able to ease it off by working around the edges with a putty knife, but it required enough force I was worried about gouging the bed. After removing it, I have PLA residue on the plate I can't entirely remove due to the texture of the bed. Is there a pre print prep I should do such as applying a glue stick layer, or a solvent that won't harm the bed but will dissolve the residual PLA. Thanks for any help!

@Rasordiver 2 жыл бұрын

Thanks for showing us the new Printer. Wehen using a micro sd card, is it still necessary to format it with the old fat32? Other Printer already are equipped with an usb port. Why didn‘t creality enlarge the printbed? A bit more space would be nice. (Like the Südwindes x2)

@kyanrymenants2916 2 жыл бұрын

Really good revieuw WOW!!! , this really proves age doesn’t matter you are way smarter and helpfull than a lot of other revieuwers. Good job!

@radmin2 2 жыл бұрын

That high speed tpu is the bomb.I love it.

@ronbourg1 2 жыл бұрын

Great video! I now have a Ender S1but am not getting good results printing the same Eiffel tower with a 270mm height. Could you please share your Cura settings, Layer height, % infill, infill type and whatever other important settings. Thanks

@josephjolly1936 2 жыл бұрын

Thanks for the update, this may be coming to my home real soon.👍

@mrt1426 2 жыл бұрын

Great video. Would love to see future videos of any updates you make to this printer. I hear Creality makes an all metal hotend for this machine.

@robbudden 2 жыл бұрын

Absolutely excellent, how have I not seen your channel before. Thank you

@patrykK1028 2 жыл бұрын

The belt tensioners are easily printable btw for almost no cost

@antondjayzakov4776 2 жыл бұрын

thanks for such a deep review 👍 Every small detail is explained . Appreciate huge amount of work you've done 👏

@comradejordan5738 2 жыл бұрын

A PID tune would help with the inconsistencies of the leveling bed due to hotend fluctuations.

@TommiHonkonen 2 жыл бұрын

The bed sensor not stowing is just a feature you can have in the config. Marlin has it as #define BLTOUCH_HS_MODE. Doesn't make it more or less betterer or worse really, its just for speed. Also comment the //#define MULTIPLE_PROBING 2 to make it probe just once for speed. My probing is 5x5, 1 probe at 15mm/s and it's just as good as doing it many times slower.

@webslinger2011 2 жыл бұрын

Very well presented. Thanks to you and your brother for the reviews, sharing and ideas.

@daitedve1984 Жыл бұрын

I didn't catch at all how "wider extrusion" (maybe HIGHER extrusion??) helps with bed tramming. If your bed is 2mm below, you not only waste more filament, but also join this "base" to the model (what sometime can be undesirable, because it's hard to detach). I hope I understood correctly idea of "wider extrusion" (of filament?).

@taggerung890 2 жыл бұрын

Love your indepth reviews, thanks!

@jecbosch Жыл бұрын

see u vid about s1, i purchasing this one. thanks for u good advices. go on..more tips or upgrades, greeting from Amsterdam (NLD)

@mikelast3099 2 жыл бұрын

My compliments to your video. Done really fine and precise with clear good information. Also the way you present it is very pleasant. Thank you!

@markclark787 2 жыл бұрын

Thanks, i am looking at getting my first 3D printer and your video really helps

@anthonyC9199 2 жыл бұрын

Good info. I am having extrusion issues because of the boden tube.

@G4CEFITNESS 2 жыл бұрын

What a great review. I'm glad it was recommended. You definitely gained a new subscriber 😁👍.

@RoelofBriers 2 жыл бұрын

Excellent video, great help in making a choice.

@iskandartaib 2 жыл бұрын

The pre-assembly is a change from the usual Creality practice. And would be a big selling point for some people.

@Cheeky_Goose 2 жыл бұрын

Great review! Very well written and in-depth.

@ame7165 Жыл бұрын

great content as usual! as a long time prusa user, i just bought the pro model of this ender 3 s1. the only complaints i have so far: no obvious way to get the extruder to extrude when i load filament to purge the old color out. also, it doesn't seem as dimensionally accurate for sharp corners, like a 90 degree corner. those end up rounded, so getting a square part to fit into a square hole is very difficult with this issue. older 3d printers used to have this issue, so i think there's gotta be some slicer settings that can fix this

@reinerreinbrech7431 2 жыл бұрын

Awesome work you two are doing!

@DeiselD305 2 жыл бұрын

One thing i noticed immediately is that the slots in the extrusions were gone. I kind of liked the extrusions to add on and attach custom pieces

@rgoldrich 2 жыл бұрын

Aurora, Your videos are full of useful information. You have a knack for focusing on the important / consequential details, and your delivery is even, calm, and a pleasure to hear. You are indeed a smart, talented young lady. Keep up the good work! Now one question: What do you make of the top layer shown on the video at 11:00? Is this a function of the printer. Similar effects are visible on the screw you printed. Many thanks! :-)

@jhonny1392 2 жыл бұрын

Hi, your review was outstanding !. Thanks a lot from Santiago de Chile, South America. This is John. Cheers.

@zola5584 2 жыл бұрын

Great video!! I hope creality will see this ,and learn from this!! And one more thing full metal heatbreak should be basic feature on 3d printers! (and maybe better,if the psu is on the side like prusa and basic ender 3 has, easier psu relocation for example outside, and better ventilation for psu)

@Spelter 2 жыл бұрын

The full metal heatbreak alone, i.e. Microswiss, is 50 Bucks and you only need it when you print high temperature with ABS and stuff. If you do it, you could modify your printer (and yes I've added a Microswiss lol)

@zola5584 2 жыл бұрын

@@Spelter nope its could be used even at PETG (at least capricorn) and buy an overpriced microswiss heatbreak is really not the only option

@Spelter 2 жыл бұрын

@@zola5584 I bought it for 20 bucks used, so no overpriced there. And I had problems with PETG from Jake3d and the original heatbreak. With the Microswiss, it works like a charm.

@davidjohnson8474 2 жыл бұрын

Sounds like a good printer.I have a Ender 3 max and have done some of these upgrades.I know for me I would buy one and put a bunch of the parts on my max.I have a solid bed,CR touch,Dual Z axis and have all the stepper motors to the big one 40\42 I think thats it.Too bad you cant buy the parts! Great job showing this printer.

@nico8273 Жыл бұрын

Hi! I've been binge watching all your videos and the production quality as well as the in-depth analysis is just outstanding! I was wondering if there is any information you'd recommend regarding the extruder for the S1. Im intending to upgrade to an all metal one but I cant find much online about the necessary firmware upgrades for setting the nozzle temps

@paulradford4100 2 жыл бұрын

It is a nice printer, clean looking with the upgrades you mentioned. However, I feel it may be a little advanced for people new to the hobby and this printer at that price may encourage lots of beginners who simply have no ideas about fine tuning.. I feel it is an unfair price comparison as 3 pro's are cheaper now and really you may save $40, if anything at all.. It's not so much that we "enjoy" modding, more that some are on a budget and post modding allows you to spread the cost.. I strongly disagree with you about getting rid of bed springs, I'm sorry, but I feel the springs are necessary.. My reason is that, yes, it has auto bed levelling, but abl is only a fix, not a cure. The more you can manually level the bed, the less the abl will have to fix and the better the overall quality. Never rely on abl.. For someone who has the 3 pro, has experience and wants to upgrade, this out-of-the-box may be useful.. Good video though and nice presentation by you..

@mrfireclaw 2 жыл бұрын

Hey little one good job I'm looking for a 3-D printer now I'm trying to figure out what would be a good start and and work my way up from hobby to work horse if that makes any sense The question is what size of printer should I get it's gonna be next to my head is there any fumes or anything like that 1 last bit could you hold a American dollar next to it so you can get a scale size cameras play tricks thanks