CREATE YOUR OWN SUBLIMATION BLANKS

Рет қаралды 33,306

Күн бұрын

This is a quick tutorial on how to create your OWN sublimation blanks for sublimation. We will cover how-to sublimate on Wood or MDF & Metal. We will also be covering batch presses and discuss which spray works best by comparing 3 of the most popular spray paints on the market.
LINKS:
You can use any 1.5 mil laminate, but I find that this rolls is super reasonable and goes a long way.
Laminate: www.amazon.com...
Of the 3 sprays tested, this one had good coverage, is easy to find locally & priced reasonably!
Paint Spray: www.amazon.com...
Follow me on Facebook: / digitaldesignsbyliby
Sublimation & More Digital Design Shop: www.DigitalDesignsByLiby.com

Пікірлер: 65

@uncertainAuthor 11 ай бұрын

As someone just getting into sublimation and looking for an affordable method of getting blanks to test on while I learn how to improve, thank you so much for this tutorial!! ♥

@digitaldesignsbyliby3963 11 ай бұрын

You’re most welcome. These are a great substitute to those pricey sublimation blanks :)

@Vickieshed Ай бұрын

When you did the test on the different paints were they all treated with the high heat? I just got a printer and have not gotten any blanks yet. Researching the easiest and cost efficient ways first. ❤

@jennieesquilin5349 10 ай бұрын

I tried this on painter’s canvases and it worked beautifully!! Thank you so much!!

@digitaldesignsbyliby3963 10 ай бұрын

Yes it does! You can also add press sparkly white vinyl, then sublimate directly on the vinyl. That works great too on canvas.

@shirleysavoie743 11 ай бұрын

I have tried this several times and didn't like the bumpy appearance left on the wood. Yours have the same effect. I now do mine with waterslide works perfect every time and only takes a few minutes, no need for sublimation ink or paper. Good video though this idea works great on tiles as well.

@digitaldesignsbyliby3963 11 ай бұрын

Yes, it is sometimes hard to find the "sweet spot" to avoid the "bumps" but it is doable. You just have to dial in the right about of pressure, time & temp as all these can differ lightly depending on your heat press. Also, if your wood is rough, sanding it before following the process helps a lot as well. Best of luck to you! :)

@susanna1207 Жыл бұрын

Great idea, thank you 😊

@digitaldesignsbyliby3963 Жыл бұрын

Thank you so much... I hope this opens up a world of possibilities for you! Happy Crafting!

@Imtipstertips 7 ай бұрын

Wow what a fantastic idea. Thank you

@digitaldesignsbyliby3963 7 ай бұрын

You’re most welcome. Happy Crafting!

@SlickDiecast 6 ай бұрын

This is amazing and you did a great job showing the process. What is the purpose of the clear laminate sheet? I’ve seen other people not use the laminate and sublimate right on the painted surface.

@digitaldesignsbyliby3963 5 ай бұрын

Oh wow I've never heard of that being possible! I wonder what paint they were using? The clear laminate is used to prepare the surface to accept the sublimation process.

@deniseweathersby-ward4721 Жыл бұрын

I’m confused on what material you used and how you cut it😟

@digitaldesignsbyliby3963 Жыл бұрын

Hi! The link to the laminate and paint used is in the description. This how-to shows you how you can prepare any type of wood in any shape for sublimation using the process described. There are lots of places where you can get wood shapes ~ Amazon, Walmart, Dollar Tree to name a few. You can also use whatever shape you like too 😊 I have several videos of completed projects using these blanks where I provide a list of all materials used in the project. If I can helps in anyway, contact me through Facebook… I’m here to help 😊 facebook.com/DigitalDesignsByLiby/

@kelliewilliams1562 Жыл бұрын

Awesome and thank you.

@digitaldesignsbyliby3963 Жыл бұрын

Thanks so much... I hope this helps with your future crafting projects :)

@myday1010 Жыл бұрын

Thanks for sharing ❤

@digitaldesignsbyliby3963 Жыл бұрын

You are so welcome

@ShoryoTombo Жыл бұрын

Can you use basswood or any kind of wood design to cut by Cricut? This is brilliant by the way!

@digitaldesignsbyliby3963 Жыл бұрын

The process works well with most every type of wood. Just be mindful that very thin wood can and will warp when heated.

@victoriouskre8tionz593 Жыл бұрын

Did you make the blanks or did you purchase? This is good but I'm not sure what blanks your using?

@digitaldesignsbyliby3963 Жыл бұрын

Hi! The great thing about this process is that you can get wood from a variety of places. As I mentioned in the video some are from Dollar Tree (like the square planks & metal tags), the round ones are from Walmart and the tags are from Amazon. I do have a couple of other video projects where I provide the source for the materials used in the project. But frankly any wood will do… I don’t suggest really thin, paper thin wood (because it will warp) but certainly 1/8” or more will do. Hope this helps :)

@victoriouskre8tionz593 Жыл бұрын

@@digitaldesignsbyliby3963 Thank you and yes that does help.

@Angeliques2cents Жыл бұрын

Where do you get the blanks? Do you make them and if so with what type of wood and how thick? I await your answer. Thank you.

@digitaldesignsbyliby3963 Жыл бұрын

Hi there! You can get the wood blanks just about anywhere ~ Dollar Tree, Amazon, Walmart. The process works well with most every type of wood. Just be mindful that very thin wood can and will warp when heated. I have several other tutorials where I list where I got the blanks I used in that project. You are welcome to take a look at those :)

@pinsonc27 Жыл бұрын

Awesome

@digitaldesignsbyliby3963 Жыл бұрын

Thank you! It means the world to me :)

@pattyfrahm7151 8 ай бұрын

Any ideas on how to create my own slate sublimation blanks? I have a stack of regular slate coasters I would LOVE to be able to sublimate onto. Thank you!

@digitaldesignsbyliby3963 7 ай бұрын

I haven't experimented with slates but you can try PolyGloss for hard substrates. You can get on Amazon. Drop me a line if you try it! :)

@pattyfrahm7151 7 ай бұрын

I do have PolyGloss, however, I was hoping for further info as far as the white sublimation option. Thank you!!

@digitaldesignsbyliby3963 7 ай бұрын

@@pattyfrahm7151 duh I didn't even take into account the fact that the slate is dark! According to various sources on Google, slate can be painted after prepping. Many recommend chalk paint since slate is porous. Good luck!

@pattyfrahm7151 7 ай бұрын

Awesome because I just got some chalk paint for sublimating a few other things. THANK YOU!!@@digitaldesignsbyliby3963

@nellec97 Жыл бұрын

Are the paints under the laminate? Can you make earrings using this tutorial?

@digitaldesignsbyliby3963 Жыл бұрын

Yes, you paint the wood first. As for earring I don’t see why not :)

@AudreyCooper-ku6sz Ай бұрын

was the picture done wtih sublimation inks on a sublimation printer???

@digitaldesignsbyliby3963 Ай бұрын

Yes. The blanks were laminated and then sublimated with sublimation inks printed on a converted Epson Ecotank.

@bharatuday3196 Жыл бұрын

Can we use Plaster of Paris to make the base of the blanks before coating?

@digitaldesignsbyliby3963 Жыл бұрын

I don't believe so. I've only tried it on wood. Plus I think plaster of paris produces toxic fumes when heated

@tangeewilson 8 ай бұрын

Can you just send it through a lamination machine? Prime/spray/chalk your item then run thru lamination machine with the lamination cover?

@digitaldesignsbyliby3963 8 ай бұрын

No you can't run it through your lamination machine. The laminating process requires temperature of 380-400 with pressure. This can only be accomplished with a heat press or large easy press. Also, the thickness of the wood/substrate will not feed through a laminator. Hope this helps!

@tangeewilson 8 ай бұрын

@@digitaldesignsbyliby3963 I was thinking for tags not bigger things but thank you! I immediately bought the supplies you had linked and can’t wait to try! I’ve been crafting for years and am always in awe of clever people like you! The tips and work arounds are amazing! Merry Christmas!

@digitaldesignsbyliby3963 8 ай бұрын

@@tangeewilson Aaww thanks for the kind words! I think if its thin tags it may work. It certainly won't hurt to try! My biggest concern is not the laminating of the tags but the sublimation, which requires higher temps than the laminator may generate. Let me know if you try it and what the results were! Merry Christmas & happy crafting!

@irishka_sherina Жыл бұрын

Здравствуйте. Я правильно поняла, нужна грунтовка и пленка для ламинации, и все?

@digitaldesignsbyliby3963 Жыл бұрын

Да, грунтовка или краска и пленка для ламинирования

@irishka_sherina Жыл бұрын

@@digitaldesignsbyliby3963 круто! Спасибо, будем экспериментировать) спасибо!

@laurajohnson4748 5 ай бұрын

Do you spray the blanks first then put laminating film on them

@digitaldesignsbyliby3963 5 ай бұрын

The spraying is optional. If you want a more vintage look to your sublimation image, you can leave the blank as is (natural wood). Painting the blanks "white" will allow your sublimation design to be more vibrant. The choice is yours :)

@StephTheOriginal 9 ай бұрын

Would this work on chipboard?

@digitaldesignsbyliby3963 8 ай бұрын

Sure will!

@ccrvip Жыл бұрын

The laminate sheets are they 3mm or 5mm?

@digitaldesignsbyliby3963 Жыл бұрын

You can use the 5mm but for me the 3mm adheres better.

@ccrvip Жыл бұрын

Outstanding... Ty Ty for the quick response and you are amazing...

@gszeluga Жыл бұрын

Very difficult to hear

@digitaldesignsbyliby3963 Жыл бұрын

Bear with me... I'm new to this whole videotaping thing. I hope you came away with something useful :)

@mikeledee8786 7 ай бұрын

If you use MDF, you should not see bumps.

@digitaldesignsbyliby3963 7 ай бұрын

Correct MDF is a lot smoother. With wood too if you sand the wood well.

@devdesigns Жыл бұрын

can you do glass?

@digitaldesignsbyliby3963 Жыл бұрын

There are sublimation ready glass cups and tumblers. I just haven't come across a "hack" for how to DIY sublimation on glass. Wood as you can see from the video is super simple. :)

@mrsdizi1234 4 ай бұрын

@@digitaldesignsbyliby3963 yes you can do glass the same way or add a white vinyl to the glass then sublimate works and looks beautiful.

@digitaldesignsbyliby3963 4 ай бұрын

@@mrsdizi1234 thanks for the info! I’ll have to try this!

@buddysmith7080 4 ай бұрын

They aren't very smooth

@digitaldesignsbyliby3963 4 ай бұрын

It all depends on the smoothness of the wood (natural wood texture) used. I find that by sanding the wood before laminating helps tremendously. An alternative is to use MDF.