No video
Creo Parametric 7.0 - Multibody Modeling and User Defined Features (UDFs)
Рет қаралды 3,730
Күн бұрын
@trentoncarr 4 жыл бұрын
Nice one Thanks.
@CADPLMGuy 4 жыл бұрын
Glad you like it, Trenton!
@TananBaboo 3 жыл бұрын
Will your BOM show the nut?
@CADPLMGuy 3 жыл бұрын
See my video on Multibody Modeling and Drawings.
@Wajo357 4 жыл бұрын
Also, how does multibodies work with windchill?
@CADPLMGuy 4 жыл бұрын
I talk about this in a blog post on my Patreon. The "PEM use case" like I have here currently isn't supported but PTC is working on it. Bodies currently aren't recognized by Windchill. If you take a look at my video on embedded components from Creo 5.0, you can see it is something they are working to address.
@markbohannon6072 4 жыл бұрын
I noticed that each fastener is a different body. Is there a way to have the fasteners use the same body (i.e. one thing to modify if there is a change)?
@CADPLMGuy 4 жыл бұрын
The fasteners are patterned. Change the lead feature and the others will update.
@Wajo357 4 жыл бұрын
How do multi bodies behave when you export it out as a step file? Does the step treat it as an assembly?
@CADPLMGuy 4 жыл бұрын
STEP supports bodies so it treats them as a body.
@Wajo357 4 жыл бұрын
So reimporting the step creates an assembly?
@CADPLMGuy 4 жыл бұрын
That depends on what you choose when you import. Again, STEP supports bodies, so you can import a part with bodies as a part.
Creo Parametric
Рет қаралды 10 М.
Creo Parametric
Рет қаралды 5 М.